Description and Experience of the Clinical Testbeds

This deliverable describes the up-to-date technical environment at three clinical testbed demonstrator sites of the 6WINIT Project, including the adapted clinical applications, project components and network transition technologies in use at these sites after 18 months of the Project. It also provides an interim description of early experiences with deployment and usage of these applications, components and technologies, and their clinical service impact

A practical approach to network-based processing

The usage of general-purpose processors externally attached to routers to play virtually the role of active coprocessors seems a safe and cost-effective approach to add active network capabilities to existing routers. This paper reviews this router-assistant way of making active nodes, addresses the benefits and limitations of this technique, and describes a new platform based on it using an enhanced commercial router. The features new to this type of architecture are transparency, IPv4 and IPv6 support, and full control over layer 3 and above. A practical experience with two applications for path characterization and a transport gateway managing multi-QoS is described.Most of this work has been funded by the IST project GCAP (Global Communication Architecture and Protocols for new QoS services over IPv6 networks) IST-1999-10 504. Further development and application to practical scenarios is being supported by IST project Opium (Open Platform for Integration of UMTS Middleware) IST-2001-36063 and the Spanish MCYT under projects TEL99-0988-C02-01 and AURAS TIC2001-1650-C02-01.Publicad

Service quality measurements for IPv6 inter-networks

Measurement-based performance evaluation of network traffic is becoming very important, especially for networks trying to provide differentiated levels of service quality to the different application flows. The non-identical response of flows to the different types of network-imposed performance degradation raises the need for ubiquitous measurement mechanisms, able to measure numerous performance properties, and being equally applicable to different applications and transports. This paper presents a new measurement mechanism, facilitated by the steady introduction of IPv6 in network nodes and hosts, which exploits native features of the protocol to provide support for performance measurements at the network (IP) layer. IPv6 Extension Headers have been used to carry the triggers involving the measurement activity and the measurement data in-line with the payload data itself, providing a high level of probability that the behaviour of the real user traffic flows is observed. End-to-end one-way delay, jitter, loss, and throughput have been measured for applications operating on top of both reliable and unreliable transports, over different-capacity IPv6 network configurations. We conclude that this technique could form the basis for future Internet measurements that can be dynamically deployed where and when required in a multi-service IP environment

Evaluation of IPv6 transition mechanisms using QoS service policies

IPv6 networks are rarely fully IPv6 from end to end particularly when interconnected over other providers core data networks, hence the need for IPv6 transition methods or mechanisms. Previous studies have identified some potential impact on performance where transitions occur. This study considered implementations where Quality of Service (QoS) service policies have been applied in the IPv6 network to determine if the transition mechanisms were able to guarantee the same performance and level of service when the IPv6 traffic transitions over a core IPv4 network. Using a test lab, traffic generators and data capture tools the study was able to fully test the transition mechanisms using data rates and link speeds that replicated equipment and traffic levels used in real world implementations. The study showed that the Quality of Service classes applied were maintained across the transition network providing the service guarantees required for a range of traffic classes. Results indicated that the transition implementations on the devices used (Cisco ISR 4351) translate the QoS settings from IPv6 to IPV4 and vice versa were highly effective and with negligible additional impact on performance occurring due to the additional processing required

Comparison of IPv4 and IPv6 QoS implementations using Differentiated Services

Real-time applications such as VoIP place stringent demands on network QoS. However, IP is a best-effort service and is often unable to offer the levels of QoS required for real-time applications. One mechanism that has been commonly used to address this issue in IP networks is Differentiated Services (DiffServ). This paper describes the use of DiffServ in IPv4 and IPv6 networks, and implementation and evaluation of VoIP QoS within OPNET IT Guru. The simulation results demonstrated that DiffServ improved the performance of VoIP traffic in both IPv4 and IPv6, allowing previously congested networks to deliver VoIP with an acceptable QoS. However the simulations also showed that the performance of DiffServ in IPv6 is slightly worse than in IPv4. A number of possible reasons for this outcome are proposed along with recommendations for further research

Per-Priority Flow Control (Ppfc) Framework For Enhancing Qos In Metro Ethernet

Day by day Internet communication and services are experiencing an increase in variety and quantity in their capacity and demand. Thus, making traffic management and quality of service (QoS) approaches for optimization of the Internet become a challenging area of research; meanwhile flow control and congestion control will be considered as significant fundamentals for the traffic control especially on the high speed Metro Ethernet. IEEE had standardized a method (IEEE 802.3x standard), which provides Ethernet Flow Control (EFC) using PAUSE frames as MAC control frames in the data link layer, to enable or disable data frame transmission. With the initiation of Metro Carrier Ethernet, the conventional ON/OFF IEEE 802.3x approach may no longer be sufficient. Therefore, a new architecture and mechanism that offer more flexible and efficient flow and congestion control, as well as better QoS provisioning is now necessary

A QoS-enabled resource management scheme for F-HMIPv6 micro mobility approach

In the near future, wireless networks will certainly run real-time applications with special Quality of Service (QoS) requirements. In this context micro mobility management schemes such as Fast Handovers over Hierarchical Mobile IPv6 (F-HMIPv6) will be a useful tool in reducing Mobile IPv6 (MIPv6) handover disruption and thereby to improve delay and losses. However, F-HMIPv6 alone does not support QoS requirements for real-time applications. Therefore, in order to accomplish this goal, a novel resource management scheme for the Differentiated Services (DiffServ) QoS model is proposed to be used as an add-on to F-HMIPv6. The new resource management scheme combines the F-HMIPv6 functionalities with the DiffServ QoS model and with network congestion control and dynamic reallocation mechanisms in order to accommodate different QoS traffic requirements. This new scheme based on a Measurement-Based Admission Control (MBAC) algorithm is effective, simple, scalable and avoids the well known traditional resource reservation issues such as state maintenance, signaling overhead and processing load. By means of the admission evaluation of new flows and handover flows, it is able to provide the desired QoS requirements for new flows while preserving the QoS of existing ones. The evaluated results show that all QoS metrics analyzed were significantly improved with the new architecture indicating that it is able to provide a highly predictive QoS support to F-HMIPv6