An Efficient Spectral Leakage Filtering for IEEE 802.11af in TV White Space

Orthogonal frequency division multiplexing (OFDM) has been widely adopted for modern wireless standards and become a key enabling technology for cognitive radios. However, one of its main drawbacks is significant spectral leakage due to the accumulation of multiple sinc-shaped subcarriers. In this paper, we present a novel pulse shaping scheme for efficient spectral leakage suppression in OFDM based physical layer of IEEE 802.11af standard. With conventional pulse shaping filters such as a raised-cosine filter, vestigial symmetry can be used to reduce spectral leakage very effectively. However, these pulse shaping filters require long guard interval, i.e., cyclic prefix in an OFDM system, to avoid inter-symbol interference (ISI), resulting in a loss of spectral efficiency. The proposed pulse shaping method based on asymmetric pulse shaping achieves better spectral leakage suppression and decreases ISI caused by filtering as compared to conventional pulse shaping filters

Power-Efficient Ultra-Wideband Waveform Design Considering Radio Channel Effects

This paper presents a power-efficient mask-constrained ultra-wideband (UWB) waveform design with radio channel effects taken into consideration. Based on a finite impulse response (FIR) filter, we develop a convex optimization model with respect to the autocorrelation of the filter coefficients to optimize the transmitted signal power spectrum, subject to a regulatory emission mask. To improve power efficiency, effects of transmitter radio frequency (RF) components are included in the optimization of the transmitter-output waveform, and radio propagation effects are considered for optimizing at the receiver. Optimum coefficients of the FIR filter are obtained through spectral factorization of their autocorrelations. Simulation results show that the proposed method is able to maximize the transmitted UWB signal power under mask constraints set by regulatory authorities, while mitigating the power loss caused by channel attenuations.Comment: 14 pages, 2 figures, 1 tabl

Communication Subsystems for Emerging Wireless Technologies

The paper describes a multi-disciplinary design of modern communication systems. The design starts with the analysis of a system in order to define requirements on its individual components. The design exploits proper models of communication channels to adapt the systems to expected transmission conditions. Input filtering of signals both in the frequency domain and in the spatial domain is ensured by a properly designed antenna. Further signal processing (amplification and further filtering) is done by electronics circuits. Finally, signal processing techniques are applied to yield information about current properties of frequency spectrum and to distribute the transmission over free subcarrier channels

Dynamic Bandwidth MCIDS - A Cognitive Solution for MCIDS based UWB Communications

Dynamic bandwidth multicode interleaved direct sequence (MCIDS), an enhanced MCIDS based Ultra-wideband (UWB) application is proposed in this paper, featuring a cognitive transmission bandwidth adaptation without any adverse effect on the data rate. By introducing a specific lowpass filtering and down-sampling into the traditional MCIDS algorithm, this system can decrease the transmission bandwidth into part of its original bandwidth but still be able to recover all the transmitted data from the reduced bandwidth. This solution can efficiently improve the coexistence ability of UWB devices in a cognitive manner without increasing hardware complexity

Wideband and UWB antennas for wireless applications. A comprehensive review

A comprehensive review concerning the geometry, the manufacturing technologies, the materials, and the numerical techniques, adopted for the analysis and design of wideband and ultrawideband (UWB) antennas for wireless applications, is presented. Planar, printed, dielectric, and wearable antennas, achievable on laminate (rigid and flexible), and textile dielectric substrates are taken into account. The performances of small, low-profile, and dielectric resonator antennas are illustrated paying particular attention to the application areas concerning portable devices (mobile phones, tablets, glasses, laptops, wearable computers, etc.) and radio base stations. This information provides a guidance to the selection of the different antenna geometries in terms of bandwidth, gain, field polarization, time-domain response, dimensions, and materials useful for their realization and integration in modern communication systems

Range estimation in multicarrier systems in the presence of interference: Performance limits and optimal signal design

Cataloged from PDF version of article.Theoretical limits on time-of-arrival (equivalently, range) estimation are derived for multicarrier systems in the presence of interference. Specifically, closed-form expressions are obtained for Cramer-Rao bounds (CRBs) in various scenarios. In addition, based on CRB expressions, an optimal power allocation (or, spectrum shaping) strategy is proposed. This strategy considers the constraints not only from the sensed interference level but also from the regulatory emission mask. Numerical results are presented to illustrate the improvements achievable with the optimal power allocation scheme, and a maximum likelihood time-of-arrival estimation algorithm is studied to assess the effects of the proposed approach in practical estimators. © 2011 IEEE

IA-OPD : an optimized orthogonal pulse design scheme for waveform division multiple access UWB systems

A new design scheme of orthogonal pulses is proposed for waveform division multiple access ultra-wideband (WDMA-UWB) systems. In order to achieve WDMA and to improve user capacity, the proposed method, termed as interference alignment based orthogonal pulse design (IA-OPD), employs combined orthogonal wavelet functions in the pulse design. The combination coefficients are optimized by using interference alignment. Due to the reciprocity between transmitted and local template signals, the iterative process based on maximum signal to interference plus noise ratio (Max-SINR) criterion can be used to solve the optimization problem in interference alignment. Numerical results demonstrate that the optimized orthogonal pulses provide excellent performances in terms of multiple access interference (MAI) suppression, user capacity and near-far resistance without using any multiuser detection (MUD) techniques. Thus, the IA-OPD scheme can be used to efficiently design a large number of orthogonal pulses for multiuser WDMA-UWB systems with low computational complexity and simple transceiver structure