3,180 research outputs found
An Efficient Spectral Leakage Filtering for IEEE 802.11af in TV White Space
Orthogonal frequency division multiplexing (OFDM) has been widely adopted for
modern wireless standards and become a key enabling technology for cognitive
radios. However, one of its main drawbacks is significant spectral leakage due
to the accumulation of multiple sinc-shaped subcarriers. In this paper, we
present a novel pulse shaping scheme for efficient spectral leakage suppression
in OFDM based physical layer of IEEE 802.11af standard. With conventional pulse
shaping filters such as a raised-cosine filter, vestigial symmetry can be used
to reduce spectral leakage very effectively. However, these pulse shaping
filters require long guard interval, i.e., cyclic prefix in an OFDM system, to
avoid inter-symbol interference (ISI), resulting in a loss of spectral
efficiency. The proposed pulse shaping method based on asymmetric pulse shaping
achieves better spectral leakage suppression and decreases ISI caused by
filtering as compared to conventional pulse shaping filters
Shaping spectral leakage for IEEE 802.11 p vehicular communications
IEEE 802.11p is a recently defined standard for the physical (PHY) and medium access control (MAC) layers for Dedicated Short-Range Communications. Four Spectrum Emission Masks (SEMs) are specified in 802.11p that are much more stringent than those for current 802.11 systems. In addition, the guard interval in 802.11p has been lengthened by reducing the bandwidth to support vehicular communication (VC) channels, and this results in a narrowing of the frequency guard. This raises a significant challenge for filtering the spectrum of 802.11p signals to meet the specifications of the SEMs. We investigate state of the art pulse shaping and filtering techniques for 802.11p, before proposing a new method of shaping the 802.11p spectral leakage to meet the most stringent, class D, SEM specification. The proposed method, performed at baseband to relax the strict constraints of the radio frequency (RF) front-end, allows 802.11p systems to be implemented using commercial off-the- shelf (COTS) 802.11a RF hardware, resulting in reduced total system cost
Waveform Design for 5G and Beyond
5G is envisioned to improve major key performance indicators (KPIs), such as
peak data rate, spectral efficiency, power consumption, complexity, connection
density, latency, and mobility. This chapter aims to provide a complete picture
of the ongoing 5G waveform discussions and overviews the major candidates. It
provides a brief description of the waveform and reveals the 5G use cases and
waveform design requirements. The chapter presents the main features of cyclic
prefix-orthogonal frequency-division multiplexing (CP-OFDM) that is deployed in
4G LTE systems. CP-OFDM is the baseline of the 5G waveform discussions since
the performance of a new waveform is usually compared with it. The chapter
examines the essential characteristics of the major waveform candidates along
with the related advantages and disadvantages. It summarizes and compares the
key features of different waveforms.Comment: 22 pages, 21 figures, 2 tables; accepted version (The URL for the
final version:
https://onlinelibrary.wiley.com/doi/abs/10.1002/9781119333142.ch2
Time-Frequency Warped Waveforms
The forthcoming communication systems are advancing towards improved
flexibility in various aspects. Improved flexibility is crucial to cater
diverse service requirements. This letter proposes a novel waveform design
scheme that exploits axis warping to enable peaceful coexistence of different
pulse shapes. A warping transform manipulates the lattice samples non-uniformly
and provides flexibility to handle the time-frequency occupancy of a signal.
The proposed approach enables the utilization of flexible pulse shapes in a
quasi-orthogonal manner and increases the spectral efficiency. In addition, the
rectangular resource block structure, which assists an efficient resource
allocation, is preserved with the warped waveform design as well.Comment: 4 pages, 5 figures; accepted version (The URL for the final version:
http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8540914&isnumber=8605392
Pulse Shaping, Localization and the Approximate Eigenstructure of LTV Channels
In this article we show the relation between the theory of pulse shaping for
WSSUS channels and the notion of approximate eigenstructure for time-varying
channels. We consider pulse shaping for a general signaling scheme, called
Weyl-Heisenberg signaling, which includes OFDM with cyclic prefix and
OFDM/OQAM. The pulse design problem in the view of optimal WSSUS--averaged SINR
is an interplay between localization and "orthogonality". The localization
problem itself can be expressed in terms of eigenvalues of localization
operators and is intimately connected to the concept of approximate
eigenstructure of LTV channel operators. In fact, on the L_2-level both are
equivalent as we will show. The concept of "orthogonality" in turn can be
related to notion of tight frames. The right balance between these two sides is
still an open problem. However, several statements on achievable values of
certain localization measures and fundamental limits on SINR can already be
made as will be shown in the paper.Comment: 6 pages, 2 figures, invited pape
Multipath Multiplexing for Capacity Enhancement in SIMO Wireless Systems
This paper proposes a novel and simple orthogonal faster than Nyquist (OFTN)
data transmission and detection approach for a single input multiple output
(SIMO) system. It is assumed that the signal having a bandwidth is
transmitted through a wireless channel with multipath components. Under
this assumption, the current paper provides a novel and simple OFTN
transmission and symbol-by-symbol detection approach that exploits the
multiplexing gain obtained by the multipath characteristic of wideband wireless
channels. It is shown that the proposed design can achieve a higher
transmission rate than the existing one (i.e., orthogonal frequency division
multiplexing (OFDM)). Furthermore, the achievable rate gap between the proposed
approach and that of the OFDM increases as the number of receiver antennas
increases for a fixed value of . This implies that the performance gain of
the proposed approach can be very significant for a large-scale multi-antenna
wireless system. The superiority of the proposed approach is shown
theoretically and confirmed via numerical simulations. {Specifically, we have
found {upper-bound average} rates of 15 bps/Hz and 28 bps/Hz with the OFDM and
proposed approaches, respectively, in a Rayleigh fading channel with 32 receive
antennas and signal to noise ratio (SNR) of 15.3 dB. The extension of the
proposed approach for different system setups and associated research problems
is also discussed.Comment: IEEE Transactions on Wireless Communication
- …