2,846 research outputs found
Prototyping a Multi-Root ONS
International audienceThe Object Naming System (ONS) is a central lookup service used in the EPCglobal network for retrieving location information about a specific Electronic Product Code (EPC). This centralized solution lacks scalability and fault tolerance and encounters some political issues. We present the design principles of a fully-distributed multi-root solution for ONS lookup service. In distributed systems, the problem of providing a scalable location service requires a dynamic mechanism to associate identification and location. We design, prototype, and evaluate PRONS, a DHT-based solution for the multi-root problem. We show that PRONS achieves significant performance levels while respecting a number of neutrality requirements
RFID platform as a service, containerized ecosystem, feasibility and security impact analysis
This paper presents a new concept as a special type of virtualization of particular event based communication components in RFID ecosystems. The new approach is containers based virtualization, and it is applied and tested on the container of Object name service. The results of the experiment allowed us to do the preliminary analysis of security consequences on the isolated containerized DNS-based RFID sub-service. We confirmed feasibility with this sandboxing technology represented by the special container. They bring the benefits in terms of efficient software component life-cycle management and integrity improvements. Experiments results of the containerization are discussed to show the possible isolation ways of other components like EPCis and middleware. There is present evaluation towards external threats and vulnerabilities. The result is a higher level of integrity, availability of whole ecosystem and resiliency against external threats. This gives a new opportunity to build robust RFID as Platform as a service, and it proves the ability to achieve a positive impact on the end to end service Quality of service
Focal Spot, Spring 1999
https://digitalcommons.wustl.edu/focal_spot_archives/1081/thumbnail.jp
Nonlinear Control Strategies for Outdoor Aerial Manipulators
In this thesis, the design, validation and implementation of nonlinear control strategies for aerial manipulators
{i.e. aerial robots equipped with manipulators{ is studied, with special emphasis on the internal coupling of the
system and its resilience against external disturbances. For the rst, di erent decentralised control strategies
{i.e. using di erent control typologies for each one of the subsystems{ that indirectly take into account this
coupling have been analysed. As a result, a nonlinear strategy composed of two controllers is proposed. A higher
priority is given to the manipulation accuracy, relaxing the platform tracking, and hence obtaining a solution
improving the manipulation capabilities with the surrounding environment. To validate these results, thorough
stability and robustness analyses are provided, both theoretically and in simulation.
On the other hand, a signi cant e ort has been devoted to improving the response and applicability of
robot manipulators used in
ight via control. In particular, the design of controllers for lightweight
exible
manipulators {that reduce the consequences of incidents involving unforeseen contacts{ is analysed. Although
their inherent nature perfectly ts for aerial manipulation applications, the added
exibility produces unwanted
behaviours, such as second-order modes and uncertainties. To cope with them, an adaptable position nonlinear
control strategy is proposed. To validate this contribution, the stability of the approach is studied in theory
and its capabilities are proven in several experimental scenarios. In these, the robustness of the solution against
unforeseen impacts and contact with uncharacterised interfaces is demonstrated.
Subsequently, this strategy has been enriched with {multiaxis{ force control capabilities thanks to the
inclusion of an outer control loop modifying the manipulator reference. Accordingly, this additional applicationfocused
capability is added to the controlled system without loosing the modulated response of the inner-loop
position strategy. It is also worth noting that, thanks to the cascade-like nature of the modi cation, the transition
between position and force control modes is inherently smooth and automatic. The stability of this expanded
strategy has been theoretically analysed and the results validated in a set of experimental scenarios.
To validate the rst nonlinear approach with realistic outdoor simulations before its implementation, a
computational
uid dynamics analysis has been performed to obtain an explicit model of the aerodynamic
forces and torques applied to the blunt-body of the aerial platform in
ight. The results of this study have been
compared to the most common alternative nowadays, being highlighted that the proposed model signi cantly
surpasses this option in terms of accuracy. Moreover, it is worth underscoring that this characterisation could
be also employed in the future to develop control solutions with enhanced rejection capabilities against wind
conditions.
Finally, as the focus of this thesis is on the use of novel control strategies on real aerial manipulation outdoors
to improve their accuracy while performing complex tasks, a modular autopilot solution to be able to implement
them has been also developed. This general-purpose autopilot allows the implementation of new algorithms,
and facilitates their theory-to-experimentation transition. Taking into account this perspective, the proposed
tool employs the simple and widely-known MAS interface and the highly reliable PX4 autopilot as backup, thus
providing a redundant approach to handle unexpected incidents in
ight.En esta tesis se ha estudiado el diseño, validación e implementación de estrategias de control
no lineales para robots manipuladores aéreos –esto es, robots aéreos equipados con un sistema
de manipulación robótica–, dándose especial énfasis a las interacciones internas del sistema y a
su resiliencia frente a efectos externos. Para lo primero, se han analizado diferentes estrategias
de control descentralizado –es decir, que usan tipologías de control diferentes para cada uno de
los subsistemas–, pero que tienen indirectamente en consideración la interacción entre manipulación
y vuelo. Como resultado de esta línea, se propone una estretegia de control conformada
por dos controladores. Estos se coordinan de tal forma que se le da prioridad a la manipulación
sobre el seguimiento de posiciones del vehículo, produciéndose un sistema de control que mejora
la precisión de las interacciones entre el sistema manipulador y el entorno. Para validar estos resultados,
se ha analizado su estabilidad y robustez tanto teóricamente como mediante simulaciones
numéricas.
Por otro lado, se ha buscado mejorar la respuesta y aplicabilidad de los manipuladores que se
usan en vuelo mediante su control. Dentro de esta tendencia, la tesis se ha centrado en el diseño
de controladores para manipuladores ligeros flexibles, ya que estos permiten reducir el peso del
sistema completo y reducen el riesgo de incidentes debidos a contactos inesperados. Sin embargo,
la flexibilidad de estos produce comportamientos indeseados durante la operación, como la aparición
de modos de segundo orden y cierta incentidumbre en su comportamiento. Para reducir su
impacto en la precisión de las tareas de manipulación, se ha desarrollado un controlador no lineal
adaptable. Para validar estos resultados, se ha analizado la estabilidad del sistema teóricamente y se
han desarrollado una serie de experimentos. En ellos, se ha comprobado su robustez ante impactos
inesperados y contactos con elementos no caracterizados.
Posteriormente, esta estrategia para manipuladores flexibles ha sido ampliada al añadir un bucle
externo que posibilita el control en fuerzas en varias direcciones. Esto permite, mediante un único
controlador, mantener la suave respuesta de la estrategia. Además cabe destacar que, al contar esta
estrategia con un diseño en cascade, la transición entre los segmentos de desplazamiento del brazo
y de aplicación de fuerzas es fluida y automática. La estabilidad de esta estrategia ampliada ha sido
analizada teóricamente y los resultados han sido validados experimentalmente.
Para validar la primera estrategia mediante simulaciones que representen fielmente las condiciones
en exteriores antes de su implementación, ha sido necesario realizar un estudio mediante
mecánica de fluidos computacional para obtener un modelo explícito de las fuerzas y momentos
aerodinámicos a los que se efrenta la plataforma en vuelo. Los resultados de este estudio han
sido comparados con la alternativa más empleada actualmente, mostrándose que los avances del
método propuesto son sustanciales. Asimismo, es importante destacar que esta caracterización podría
también usarse en el futuro para desarrollar controladores con una respuesta mejorada ante
perturbaciones aerodinámicas, como en el caso de volar con viento. Finalmente, al ser esta una tesis centrada en las estrategias de control novedosas en sistemas
reales para la mejora de su rendimiento en misiones complejas, se ha desarrollado un autopiloto
modular fácilmente modificable para implementarlas. Este permite validar experimentalmente
nuevos algoritmos y facilita la transición entre teoría y práctica. Para ello, esta herramienta se
basa en una interfaz sencilla ampliamente conocida por los investigadores de robótica, Simulink®,
y cuenta con un autopiloto de respaldo, PX4, para enfrentarse a los incidentes inesperados que
pudieran surgir en vuelo
Analysis of Geometric Accuracy and Thickness Reduction in Multistage Incremental Sheet Forming using Digital Image Correlation
Incremental Sheet Forming (ISF) is a freeform manufacturing method whereby a 3D geometry is created by progressively deforming a metal sheet with a single point tool following a defined trajectory. The thickness distribution of a formed part is a major consideration of the process and is believed to be improved by forming the geometry in multiple stages. This paper describes a series of experiments in which truncated cone geometries were formed using two multistage methods and compared to the same geometry formed using the traditional single stage method. The geometric accuracy and thickness distributions, including 3D thickness distribution plots, of each are examined using digital image correlation (DIC). The data collected indicate that multistage forming, compared to single stage forming, has a significant effect on the geometric accuracy of the processed sheets. Moreover, the results of the experiments conducted in this paper show that sheets processed with multistage forming do not have a uniform sheet thickness reduction, rather they have a parabolic-like thickness distribution in the processed region
- …