Design considerations and experimental studies on semi-active smart pin joint

Hostile dynamic loadings such as severe wind storms, earthquakes, and sudden impacts can cause severe damage to many civil engineering structures. An intelligent structural system equipped with smart structural members that are controllable in real-time is an effective solution to structural damage and failure during such situations. Civil intelligent structures with controllable properties to adapt to any changes due to dynamic loadings can lead to effective protection of structures and their occupants. In this paper, design and testing of a semi-active magnetorheological (MR) pin joint, in which the moment resistance can be controlled in real-time by altering the magnetic field, is reported with the view of using it as a potential candidate for smart members in the development of intelligent structures. Design of prototype smart pin joints includes theoretical analysis related to the radius of the rotary plate, the property of MR fluids and the gap between the rotary plate and the casing based on the requirements of the dynamics of MR pin joints. FEM analysis was deployed to study the distribution of the magnetic field along the gap. It is found, from the theoretical analysis and experimental verification, that the MR pin joint with a diameter of 180 mm can produce a torque of up to 30 Nm, which meets requirements for semi-active members in a multi-storey prototype building model in the next stage of research and development. © Higher Education Press and Springer-Verlag 2009

Theoretical and experimental studies on semi-active smart pin joint

An intelligent structural system equipped with smart structural members that are controllable in real-time is one effective solution to prevent structural damage and failure during hostile dynamic loadings, thereby leading to effective protection of structures and their occupants. The primary purpose of this study is to design, fabricate and characterise a prototype smart member, namely a semi-active magnetorheological (MR) pin joint, through theoretical modelling and experimental investigation. Design of prototype smart pin joints includes theoretical analysis relating to the rotary plate radius, the property of MR fluids and the gap between the rotary plate and the casing based on the requirements of the dynamics of MR pin joints. It is verified that an MR pin joint with a diameter of 180 mm can produce a torque of up to 30 Nm, which is deemed adequate for realisation of the semi-active control for multi-storey building models in the next stage of research. © 2009 Taylor & Francis Group, London

Prototype of Fault Adaptive Embedded Software for Large-Scale Real-Time Systems

This paper describes a comprehensive prototype of large-scale fault adaptive embedded software developed for the proposed Fermilab BTeV high energy physics experiment. Lightweight self-optimizing agents embedded within Level 1 of the prototype are responsible for proactive and reactive monitoring and mitigation based on specified layers of competence. The agents are self-protecting, detecting cascading failures using a distributed approach. Adaptive, reconfigurable, and mobile objects for reliablility are designed to be self-configuring to adapt automatically to dynamically changing environments. These objects provide a self-healing layer with the ability to discover, diagnose, and react to discontinuities in real-time processing. A generic modeling environment was developed to facilitate design and implementation of hardware resource specifications, application data flow, and failure mitigation strategies. Level 1 of the planned BTeV trigger system alone will consist of 2500 DSPs, so the number of components and intractable fault scenarios involved make it impossible to design an `expert system' that applies traditional centralized mitigative strategies based on rules capturing every possible system state. Instead, a distributed reactive approach is implemented using the tools and methodologies developed by the Real-Time Embedded Systems group.Comment: 2nd Workshop on Engineering of Autonomic Systems (EASe), in the 12th Annual IEEE International Conference and Workshop on the Engineering of Computer Based Systems (ECBS), Washington, DC, April, 200

An agent-based implementation of hidden Markov models for gas turbine condition monitoring

This paper considers the use of a multi-agent system (MAS) incorporating hidden Markov models (HMMs) for the condition monitoring of gas turbine (GT) engines. Hidden Markov models utilizing a Gaussian probability distribution are proposed as an anomaly detection tool for gas turbines components. The use of this technique is shown to allow the modeling of the dynamics of GTs despite a lack of high frequency data. This allows the early detection of developing faults and avoids costly outages due to asset failure. These models are implemented as part of a MAS, using a proposed extension of an established power system ontology, for fault detection of gas turbines. The multi-agent system is shown to be applicable through a case study and comparison to an existing system utilizing historic data from a combined-cycle gas turbine plant provided by an industrial partner

Automated Home Oxygen Delivery for Patients with COPD and Respiratory Failure: A New Approach

Long-term oxygen therapy (LTOT) has become standard care for the treatment of patients with chronic obstructive pulmonary disease (COPD) and other severe hypoxemic lung diseases. The use of new portable O-2 concentrators (POC) in LTOT is being expanded. However, the issue of oxygen titration is not always properly addressed, since POCs rely on proper use by patients. The robustness of algorithms and the limited reliability of current oximetry sensors are hindering the effectiveness of new approaches to closed-loop POCs based on the feedback of blood oxygen saturation. In this study, a novel intelligent portable oxygen concentrator (iPOC) is described. The presented iPOC is capable of adjusting the O-2 flow automatically by real-time classifying the intensity of a patient's physical activity (PA). It was designed with a group of patients with COPD and stable chronic respiratory failure. The technical pilot test showed a weighted accuracy of 91.1% in updating the O-2 flow automatically according to medical prescriptions, and a general improvement in oxygenation compared to conventional POCs. In addition, the usability achieved was high, which indicated a significant degree of user satisfaction. This iPOC may have important benefits, including improved oxygenation, increased compliance with therapy recommendations, and the promotion of PA

Intelligent monitoring of the health and performance of distribution automation

With a move to 'smarter' distribution networks through an increase in distribution automation and active network management, the volume of monitoring data available to engineers also increases. It can be onerous to interpret such data to produce meaningful information about the health and performance of automation and control equipment. Moreover, indicators of incipient failure may have to be tracked over several hours or days. This paper discusses some of the data analysis challenges inherent in assessing the health and performance of distribution automation based on available monitoring data. A rule-based expert system approach is proposed to provide decision support for engineers regarding the condition of these components. Implementation of such a system using a complex event processing system shell, to remove the manual task of tracking alarms over a number of days, is discussed

An Intelligent Auxiliary Vacuum Brake System

The purpose of this paper focuses on designing an intelligent, compact, reliable, and robust auxiliary vacuum brake system (VBS) with Kalman filter and self-diagnosis scheme. All of the circuit elements in the designed system are integrated into one programmable system-on-chip (PSoC) with entire computational algorithms implemented by software. In this system, three main goals are achieved: (a) Kalman filter and hysteresis controller algorithms are employed within PSoC chip by software to surpass the noises and disturbances from hostile surrounding in a vehicle. (b) Self-diagnosis scheme is employed to identify any breakdown element of the auxiliary vacuum brake system. (c) Power MOSFET is utilized to implement PWM pump control and compared with relay control. More accurate vacuum pressure control has been accomplished as well as power energy saving. In the end, a prototype has been built and tested to confirm all of the performances claimed above

Improved GelSight Tactile Sensor for Measuring Geometry and Slip

A GelSight sensor uses an elastomeric slab covered with a reflective membrane to measure tactile signals. It measures the 3D geometry and contact force information with high spacial resolution, and successfully helped many challenging robot tasks. A previous sensor, based on a semi-specular membrane, produces high resolution but with limited geometry accuracy. In this paper, we describe a new design of GelSight for robot gripper, using a Lambertian membrane and new illumination system, which gives greatly improved geometric accuracy while retaining the compact size. We demonstrate its use in measuring surface normals and reconstructing height maps using photometric stereo. We also use it for the task of slip detection, using a combination of information about relative motions on the membrane surface and the shear distortions. Using a robotic arm and a set of 37 everyday objects with varied properties, we find that the sensor can detect translational and rotational slip in general cases, and can be used to improve the stability of the grasp.Comment: IEEE/RSJ International Conference on Intelligent Robots and System

Self-tuning diagnosis of routine alarms in rotating plant items

Condition monitoring of rotating plant items in the energy generation industry is often achieved through examination of vibration signals. Engineers use this data to monitor the operation of turbine generators, gas circulators and other key plant assets. A common approach in such monitoring is to trigger an alarm when a vibration deviates from a predefined envelope of normal operation. This limit-based approach, however, generates a large volume of alarms not indicative of system damage or concern, such as operational transients that result in temporary increases in vibration. In the nuclear generation context, all alarms on rotating plant assets must be analysed and subjected to auditable review. The analysis of these alarms is often undertaken manually, on a case- by-case basis, but recent developments in monitoring research have brought forward the use of intelligent systems techniques to automate parts of this process. A knowledge- based system (KBS) has been developed to automatically analyse routine alarms, where the underlying cause can be attributed to observable operational changes. The initialisation and ongoing calibration of such systems, however, is a problem, as normal machine state is not uniform throughout asset life due to maintenance procedures and the wear of components. In addition, different machines will exhibit differing vibro- acoustic dynamics. This paper proposes a self-tuning knowledge-driven analysis system for routine alarm diagnosis across the key rotating plant items within the nuclear context common to the UK. Such a system has the ability to automatically infer the causes of routine alarms, and provide auditable reports to the engineering staff