183 research outputs found
Recommended from our members
Channel equalization to achieve high bit rates in discrete multitone systems
textMulticarrier modulation (MCM) techniques such as orthogonal frequency division
multiplexing (OFDM) and discrete multi-tone (DMT) modulation are attractive
for high-speed data communications due to the ease with which MCM can combat
channel dispersion. With all the benefits MCM could give, DMT modulation has an
extra ability to perform dynamic bit loading, which has the potential to exploit fully
the available bandwidth in a slowly time-varying channel. In broadband wireline
communications, DMT modulation is standardized for asymmetric digital subscribe
line (ADSL) and very-high-bit-rate digital subscriber line (VDSL) modems. ADSL
and VDSL standards are used by telephone companies to provide high speed data
service to residences and offices.
In an ADSL receiver, an equalizer is required to compensate for the channel’s
dispersion in the time domain and the channel’s distortion in the frequency domain
of the transmitted waveform. This dissertation proposes design methods for linear
equalizers to increase the bit rate of the connection. The methods are amenable
to implementation on programmable fixed-point digital signal processors, which are
employed in ADSL/VDSL transceivers.
A conventional ADSL equalizer consists of a time-domain equalizer, a fast
Fourier transform, and a frequency domain equalizer. The time domain equalizer
(TEQ) is a finite impulse response filter that when coupled with a discretized channel
produces an equivalent channel whose impulse response is shorter than that of
the discretized channel. This channel shortening is required by the ADSL standards.
In this dissertation, I first propose a linear phase TEQ design that exploits symmetry
in existing eigen-filter approaches such as minimum mean square error(MMSE),
maximum shortening signal to noise ratio (MSSNR) and minimum intersymbol interference
(Min-ISI) equalizers. TEQs with symmetric coefficients can reach the
same performance as non-symmetric ones with much lower training complexity.
Second, I improve Min-ISI design. I reformulate the cost function to make
long TEQs design feasible. I remove the dependency of transmission delay in order
to reduce the complexity associated with delay optimization. The quantized
weighting is introduced to further lower the complexity. I also propose an iterative
optimization procedure of Min-ISI that completely avoids Cholesky decomposition
hence is better suited for a fixed-point implementation.
Finally I propose a dual-path TEQ structure, which designs a standard singleFIR
TEQ to achieve good bit rate over the entire transmission bandwidth, and
designs another FIR TEQ to improve the bit rate over a subset of subcarriers. Dualpath
TEQ can be viewed as a special case of a complex valued filter bank structure
that delivers the best bit rate of existing DMT equalizers. However, dual-path
TEQ provides a very good tradeoff between achievable bit rate vs. implementation
complexity on a programmable digital signal processor.Electrical and Computer Engineerin
Multiband Spectrum Access: Great Promises for Future Cognitive Radio Networks
Cognitive radio has been widely considered as one of the prominent solutions
to tackle the spectrum scarcity. While the majority of existing research has
focused on single-band cognitive radio, multiband cognitive radio represents
great promises towards implementing efficient cognitive networks compared to
single-based networks. Multiband cognitive radio networks (MB-CRNs) are
expected to significantly enhance the network's throughput and provide better
channel maintenance by reducing handoff frequency. Nevertheless, the wideband
front-end and the multiband spectrum access impose a number of challenges yet
to overcome. This paper provides an in-depth analysis on the recent
advancements in multiband spectrum sensing techniques, their limitations, and
possible future directions to improve them. We study cooperative communications
for MB-CRNs to tackle a fundamental limit on diversity and sampling. We also
investigate several limits and tradeoffs of various design parameters for
MB-CRNs. In addition, we explore the key MB-CRNs performance metrics that
differ from the conventional metrics used for single-band based networks.Comment: 22 pages, 13 figures; published in the Proceedings of the IEEE
Journal, Special Issue on Future Radio Spectrum Access, March 201
Enhanced multi-user DMT spectrum management using polynomial matrix decomposition techniques
This thesis researches the increasingly critical roles played by intelligent resource management
and interference mitigation algorithms in present-day input multiple output (MIMO)
communication systems. This thesis considers the application of polynomial matrix decomposition
(PMD) algorithms, an emerging broadband factorisation technology for broadband
MIMO access networks. Present DSL systems’ performance is constrained by the presence
of interference (crosstalk) between multiple users sharing a common physical cable bundle.
Compared to the traditional static spectrum management methods that define their survival
to the worst-case scenarios, DSM methods provides some degree of flexibility to both direct
channel and noise parameters to improve evolvability and robustness significantly. A novel
crosstalk-aware DSM algorithm is proposed for the efficient management of multi-user DSL
systems. Joint power allocation procedures are considered for the proposed single-channel
equalisation method in DSL access networks.
This thesis then shows that DSM can also benefit overdetermined precoding-equalisation
systems, when the channel state information (CSI) parameters call for a specific decision
feedback criterion to achieve a perfect reconstruction. A reasonable redundancy is introduced
to reformulate the original multi-user MIMO problem into the simplest case of power
management problem. DSM algorithms are primarily applied to solve the power allocation
problem in DSM networks with the aim of maximising the system attribute rather than
meeting specific requirements. Also, a powerful PMD algorithm known as sequential
matrix diagonalisation (SMD) is used for analysing the eigenvalue decomposition problem
by quantifying the available system resource including the effects of the crosstalk and its
parameters. This analysis is carried out through joint precoding and equalisation structures.
The thesis also investigates dynamic interference mitigation strategies for improving
the performance of DSL networks. Two different mitigation strategies through a decision
feedback equalisation (DFE) criterion are considered, including zero-forcing (ZF) and
minimum mean square error (MMSE) equalisers. The difference between ZF and MMSE
equalisations is analysed. Some experimental simulation results demonstrate the performance
of both ZF and MMSE equalisation under the DFE equalisation constraint settings. Model reduction on the MMSE equalisation is thus applied to balance the crosstalk interference and
enhance the data-rate throughput.
Finally, the thesis studies a multi-user MIMO problem under the utility maximisation
framework. Simulation results illustrate that the power allocation of multi-user DSL transmission
can be jointly controlled and the interference can often be mitigated optimally on
a single user basis. Driven by imperfect CSI information in current DSL networks, the
research presents a novel DSM method that allows not only crosstalk mitigation, but also the
exploitation of crosstalk environments through the fielding of versatile, flexible and evolvable
systems. The proposed DSM tool is presented to achieve a robust mitigating system in any
arbitrary overdetermined multi-user MIMO environment. Numerical optimisation results show that the mitigation of crosstalk impairment using the proposed DSM strategy. The design and implementation of the proposed DSM are carried out in the environment of
MATLAB
Advancements of MultiRate Signal processing for Wireless Communication Networks: Current State Of the Art
With the hasty growth of internet contact and voice and information centric communications, many contact technologies have been urbanized to meet the stringent insist of high speed information transmission and viaduct the wide bandwidth gap among ever-increasing high-data-rate core system and bandwidth-hungry end-user complex. To make efficient consumption of the limited bandwidth of obtainable access routes and cope with the difficult channel environment, several standards have been projected for a variety of broadband access scheme over different access situation (twisted pairs, coaxial cables, optical fibers, and unchanging or mobile wireless admittance). These access situations may create dissimilar channel impairments and utter unique sets of signal dispensation algorithms and techniques to combat precise impairments. In the intended and implementation sphere of those systems, many research issues arise. In this paper we present advancements of multi-rate indication processing methodologies that are aggravated by this design trend. The thesis covers the contemporary confirmation of the current literature on intrusion suppression using multi-rate indication in wireless communiquE9; networks
Ambiguity Function Analysis and Direct-Path Signal Filtering of the Digital Audio Broadcast (DAB) Waveform for Passive Coherent Location (PCL)
This research presents an ambiguity function analysis of the digital audio broadcast (DAB) waveform and one signal detection approach based on signal space projection techniques that effectively filters the direct-path signal from the receiver target channel. Currently, most Passive Coherent Location (PCL) research efforts are focused and based on frequency modulated (FM) radio broadcasts and analog television (TV) waveforms. One active area of PCL research includes the search for new waveforms of opportunity that can be exploited for PCL applications. As considered for this research, one possible waveform of opportunity is the European digital radio standard DAB. For this research, the DAB performance is analyzed for application as a PCL waveform of opportunity. For this analysis, DAB ambiguity function calculations and ambiguity surface plots are created and evaluated. Signal detection capability, to include characterization of time-delay and Doppler-shift measurement accuracy and resolution, is investigated and determined to be quite acceptable for the DAB wavefor
Compensation of Physical Impairments in Multi-Carrier Communications
Among various multi-carrier transmission techniques, orthogonal frequency-division multiplexing (OFDM) is currently a popular choice in many wireless communication systems. This is mainly due to its numerous advantages, including resistance to multi-path distortions by using the cyclic prefix (CP) and a simple one-tap channel equalization, and efficient implementations based on the fast Fourier and inverse Fourier transforms. However, OFDM also has disadvantages which limit its use in some applications. First, the high out-of-band (OOB) emission in OFDM due to the inherent rectangular shaping filters poses a challenge for opportunistic and dynamic spectrum access where multiple users are sharing a limited transmission bandwidth. Second, a strict orthogonal synchronization between sub-carriers makes OFDM less attractive in low-power communication systems. Furthermore, the use of the CP in OFDM reduces the spectral efficiency and thus it may not be suitable for short-packet and low-latency transmission applications. Generalized frequency division multiplexing (GFDM) and circular filter-bank multi-carrier offset quadrature amplitude modulation (CFBMC-OQAM) have recently been considered as alternatives to OFDM for the air interface of wireless communication systems because they can overcome certain disadvantages in OFDM. Specifically, these two systems offer a flexibility in choosing the shaping filters so that the high OOB emission in OFDM can be avoided. Moreover, the strict orthogonality requirement in OFDM is relaxed in GFDM and CFBMC-OQAM which are, respectively, non-orthogonal and real-field orthogonal systems. Although a CP is also used in these two systems, the CP is added for a block of many symbols instead of only one symbol as in OFDM, which, therefore, improves the spectral efficiency. Given that the performance of a wireless communication system is affected by various physical impairments such as phase noise (PN), in-phase and quadrature (IQ) imbalance and imperfect channel estimation, this thesis proposes a number of novel signal processing algorithms to compensate for physical impairments in multi-carrier communication systems, including OFDM, GFDM and CFBMC-OQAM.
The first part of the thesis examines the use of OFDM in full-duplex (FD) communication under the presence of PN, IQ imbalance and nonlinearities. FD communication is a promising technique since it can potentially double the spectral efficiency of the conventional half-duplex (HD) technique. However, the main challenge in implementing an FD wireless device is to cope with the self-interference (SI) imposed by the device's own transmission. The implementation of SI cancellation (SIC) faces many technical issues due to the physical impairments. In this part of research, an iterative algorithm is proposed in which the SI cancellation and detection of the desired signal benefit from each other. Specifically, in each iteration, the SI cancellation performs a widely linear estimation of the SI channel and compensates for the physical impairments to improve the detection performance of the desired signal. The detected desired signal is in turn removed from the received signal to improve SI channel estimation and SI cancellation in the next iteration. Results obtained show that the proposed algorithm significantly outperforms existing algorithms in SI cancellation and detection of the desired signal.
In the next part of the thesis, the impact of PN and its compensation for CFBMC-OQAM systems are considered. The sources of performance degradation are first quantified. Then, a two-stage PN compensation algorithm is proposed. In the first stage, the channel frequency response and PN are estimated based on the transmission of a preamble, which is designed to minimize the channel mean squared error (MSE). In the second stage the PN compensation is performed using the estimate obtained from the first stage together with the transmitted pilot symbols. Simulation results obtained under practical scenarios show that the proposed algorithm effectively estimates the channel frequency response and compensates for the PN. The proposed algorithm is also shown to outperform an existing algorithm that implements iterative PN compensation when the PN impact is high.
As a further development from the second part, the third part of the thesis considers the impacts of both PN and IQ imbalance and proposes a unified two-stage compensation algorithm for a general multi-carrier system, which can include OFDM, GFDM and CFBMC-OQAM. Specifically, in the first stage, the channel impulse response and IQ imbalance parameters are first estimated based on the transmission of a preamble. Given the estimates obtained from the first stage, in the second stage the IQ imbalance and PN are compensated in that order based on the pilot symbols for the rest of data transmission blocks. The preamble is designed such that the estimation of IQ imbalance does not depend on the channel and PN estimation errors. The proposed algorithm is then further extended to a multiple-input multiple-output (MIMO) system. For such a MIMO system, the preamble design is generalized so that the multiple IQ imbalances as well as channel impulse responses can be effectively estimated based on a single preamble block. Simulation results are presented and discussed in a variety of scenarios to show the effectiveness of the proposed algorithm
- …