2,109 research outputs found
Software-only TDOA/RTF positioning for 3G WCDMA wireless network
A hybrid location finding technique based oil time difference of arrival (TDOA) with round-trip time (RTT) measurements is proposed for a wideband code division Multiple access (WCDMA) network. In this technique, a mobile station measures timing from at least three base stations using user equipment receive-transmit (UE Rx-Tx) time difference and at least three base stations measure timing from the mobile station using RTT. The timing measurements of mobile and base stations are then combined to solve for both the location of the mobile and the synchronization offset between base stations. A software-only geolocation system based on the above mobile/base stations timing measurements is implemented in Matlab platform and the performance of the system is investigated using large-scale propagation models
Massive MIMO-based Localization and Mapping Exploiting Phase Information of Multipath Components
In this paper, we present a robust multipath-based localization and mapping
framework that exploits the phases of specular multipath components (MPCs)
using a massive multiple-input multiple-output (MIMO) array at the base
station. Utilizing the phase information related to the propagation distances
of the MPCs enables the possibility of localization with extraordinary accuracy
even with limited bandwidth. The specular MPC parameters along with the
parameters of the noise and the dense multipath component (DMC) are tracked
using an extended Kalman filter (EKF), which enables to preserve the
distance-related phase changes of the MPC complex amplitudes. The DMC comprises
all non-resolvable MPCs, which occur due to finite measurement aperture. The
estimation of the DMC parameters enhances the estimation quality of the
specular MPCs and therefore also the quality of localization and mapping. The
estimated MPC propagation distances are subsequently used as input to a
distance-based localization and mapping algorithm. This algorithm does not need
prior knowledge about the surrounding environment and base station position.
The performance is demonstrated with real radio-channel measurements using an
antenna array with 128 ports at the base station side and a standard cellular
signal bandwidth of 40 MHz. The results show that high accuracy localization is
possible even with such a low bandwidth.Comment: 14 pages (two columns), 13 figures. This work has been submitted to
the IEEE Transaction on Wireless Communications for possible publication.
Copyright may be transferred without notice, after which this version may no
longer be accessibl
Detection of GNSS signals propagation in urban canyos using 3D city models
This paper presents one of the solutions to the problem of multipath propagation and effects on Global Navigation Satellite Systems (GNSS) signals in urban canyons. GNSS signals may reach a receiver not only through Line-of-Sight (LOS) paths, but they are often blocked, reflected or diffracted from tall buildings, leading to unmodelled GNSS errors in position estimation. Therefore in order to detect and mitigate the impact of multipath, a new ray-tracing model for simulation of GNSS signals reception in urban canyons is proposed - based on digital 3D maps information, known positions of GNSS satellites and an assumed position of a receiver. The model is established and validated using experimental, as well as real data. It is specially designed for complex environments and situations where positioning with highest accuracy is required - a typical example is navigation for blind people
Modelling of Path Arrival Rate for In-Room Radio Channels with Directive Antennas
We analyze the path arrival rate for an inroom radio channel with directive
antennas. The impulse response of this channel exhibits a transition from early
separate components followed by a diffuse reverberation tail. Under the
assumption that the transmitter's (or receiver's) position and orientation are
picked uniformly at random we derive an exact expression of the mean arrival
rate for a rectangular room predicted by the mirror source theory. The rate is
quadratic in delay, inversely proportional to the room volume, and proportional
to the product of beam coverage fractions of the transmitter and receiver
antennas. Making use of the exact formula, we characterize the onset of the
diffuse tail by defining a "mixing time" as the point in time where the arrival
rate exceeds one component per transmit pulse duration. We also give an
approximation for the power-delay spectrum. It turns out that the power-delay
spectrum is unaffected by the antenna directivity. However, Monte Carlo
simulations show that antenna directivity does indeed play an important role
for the distribution of instantaneous mean delay and rms delay spreadComment: Submitted to IEEE Trans. Antennas and Propagatio
Location-free Spectrum Cartography
Spectrum cartography constructs maps of metrics such as channel gain or
received signal power across a geographic area of interest using spatially
distributed sensor measurements. Applications of these maps include network
planning, interference coordination, power control, localization, and cognitive
radios to name a few. Since existing spectrum cartography techniques require
accurate estimates of the sensor locations, their performance is drastically
impaired by multipath affecting the positioning pilot signals, as occurs in
indoor or dense urban scenarios. To overcome such a limitation, this paper
introduces a novel paradigm for spectrum cartography, where estimation of
spectral maps relies on features of these positioning signals rather than on
location estimates. Specific learning algorithms are built upon this approach
and offer a markedly improved estimation performance than existing approaches
relying on localization, as demonstrated by simulation studies in indoor
scenarios.Comment: 14 pages, 12 figures, 1 table. Submitted to IEEE Transactions on
Signal Processin
- …