Radio network planning and optimisation for WCDMA

The present thesis introduces the radio network planning process and optimisation for WCDMA (FDD mode), as defined by 3GPP. This thesis consists of three parts: modelling and tools for radio network planning, process for pre-operational network control and optimisation for the operational network. General challenges to face in 3G network control are based on the fact that many issues are interconnected and should be simultaneously considered, such as Planning means not only to meet current status and demands, but the solution should also comply with the future requirements by providing an acceptable development path. Traffic modelling is not only the question about the total amount of traffic growth, but also the question about the future service distribution and performance demands. All CDMA systems have a relation between capacity and coverage. Consequently, the network planning itself is not only based on propagation estimation but also on the interference situation in the network. Ideally, site selection consideration will be done based on the network analysis with planned load and traffic/service portfolio, taking possible co-siting constraints into account. Provision of multiple services and seamless management of at least two multiple access systems require rapid evolution of the management tools and processes. The network performance in terms of capacity, quality, and implementation and operational costs forms a multidimensional space. Operators' task will be to convert the business strategy to an operating point in the performance space in a cost efficient manner. The contribution of this thesis in terms of modelling and tools is as follows: Improvement of the accuracy of radio link budget by introducing power control headroom (also called fast fading margin). Improvement of loading equation by introducing a transmit power increase term. Development of theory and modelling for a planning tool capable of multi-service and multi-carrier interference, capacity and coverage analysis. Development and implementation an interface taking into account the true traffic distribution (not uniform) and terminal speed. In the area of pre-operational planning process the contribution of this thesis is as follows: Development of dimensioning methodology for multi-service network site density estimation, utilising the modelling of power control headroom, transmit power increase, soft handover and Eb/N0. Development of radio network planning process for multi-service environment including capacity and coverage evaluation for a given traffic mixture, quality and area requirements. Analysis of means to improve radio network performance with Mast Head Amplifier (MHA), diversity reception, sectorisation and proper antenna selection. In the area of optimisation of the operational network the contribution of this thesis is as follows: Definition for optimisation target in the case of 3G. The optimisation will be capacity-quality trade-off management instead of plain quality improvement process. Introduction of Self Organizing Map (SOM) in the analysis of cellular networks. Analysis of the applicability of SOM in WCDMA cellular network optimisation. Introduction of SOM based applications to support network capacity-quality trade-off management. It is worth noting that process and methods described in this work are not limited to 3G systems with WCDMA radio access technology, but they are applicable to other CDMA standards as well.reviewe

Dynamic Capacity Enhancement using a Smart Antenna in Mobile Telecommunications Networks

This work describes an investigation into the performance of antennas for mobile base station applications and techniques for improving the coverage and capacity within a base station cell. The work starts by tracing the development of mobile systems, both in technical and commercial terms, from the earliest analogue systems to present day broadband systems and includes anticipated future developments. This is followed by an outline of how smart antenna systems can be utilised to improve cell coverage and capacity. A novel smart antenna system incorporating an array of slant ± 450 dual- polarised stacked patch elements four columns wide excited by a novel multi-beam forming and beam shaping network has been designed, simulated and implemented. It is found that for an ideal smart antenna array, four narrow overlapping beams, one wide “broadcast channel” beam and right and left shaped beams can be provided. Results are presented for the simulation of the smart antenna system using CST EM simulation software which inherently includes mutual coupling and the effects of a truncated ground plane on the element patterns. The results show some significant changes to the desired set of coverage patterns and various mutual coupling compensation techniques have been reviewed. An improved design technique has been developed for compensating the performance degrading effects of mutual coupling and finite ground plane dimensions in microstrip antenna arrays. The improved technique utilises combination of two previously known techniques: complex excitation weights compensation by inversion of the array mutual coupling scattering matrix and the incorporation of a WAIM (wide angle impedance matching) sheet. The technique has been applied to a novel multi-beam smart antenna array to demonstrate the efficacy of the technique by electromagnetic simulation. In addition, a demonstrator array has been constructed and tested which has yielded a positive conformation of the simulation results. For the developed demonstrator array which provides seven different beams, beams “footprints” have been predicted both for free space propagation and for urban propagation to evaluate the dynamic capacity performance of the smart antenna in a 3G mobile network. The results indicate that sector capacity can be dynamically tailored to user demand profiles by selection of the appropriate beam patterns provided by the novel smart antenna system

Wideband mobile propagation channels: Modelling measurements and characterisation for microcellular environments

EThOS - Electronic Theses Online ServiceGBUnited Kingdo