Camera positioning for 3D panoramic image rendering

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University London.Virtual camera realisation and the proposition of trapezoidal camera architecture are the two broad contributions of this thesis. Firstly, multiple camera and their arrangement constitute a critical component which affect the integrity of visual content acquisition for multi-view video. Currently, linear, convergence, and divergence arrays are the prominent camera topologies adopted. However, the large number of cameras required and their synchronisation are two of prominent challenges usually encountered. The use of virtual cameras can significantly reduce the number of physical cameras used with respect to any of the known camera structures, hence adequately reducing some of the other implementation issues. This thesis explores to use image-based rendering with and without geometry in the implementations leading to the realisation of virtual cameras. The virtual camera implementation was carried out from the perspective of depth map (geometry) and use of multiple image samples (no geometry). Prior to the virtual camera realisation, the generation of depth map was investigated using region match measures widely known for solving image point correspondence problem. The constructed depth maps have been compare with the ones generated using the dynamic programming approach. In both the geometry and no geometry approaches, the virtual cameras lead to the rendering of views from a textured depth map, construction of 3D panoramic image of a scene by stitching multiple image samples and performing superposition on them, and computation of virtual scene from a stereo pair of panoramic images. The quality of these rendered images were assessed through the use of either objective or subjective analysis in Imatest software. Further more, metric reconstruction of a scene was performed by re-projection of the pixel points from multiple image samples with a single centre of projection. This was done using sparse bundle adjustment algorithm. The statistical summary obtained after the application of this algorithm provides a gauge for the efficiency of the optimisation step. The optimised data was then visualised in Meshlab software environment, hence providing the reconstructed scene. Secondly, with any of the well-established camera arrangements, all cameras are usually constrained to the same horizontal plane. Therefore, occlusion becomes an extremely challenging problem, and a robust camera set-up is required in order to resolve strongly the hidden part of any scene objects. To adequately meet the visibility condition for scene objects and given that occlusion of the same scene objects can occur, a multi-plane camera structure is highly desirable. Therefore, this thesis also explore trapezoidal camera structure for image acquisition. The approach here is to assess the feasibility and potential of several physical cameras of the same model being sparsely arranged on the edge of an efficient trapezoid graph. This is implemented both Matlab and Maya. The quality of the depth maps rendered in Matlab are better in Quality

INTERMEDIATE VIEW RECONSTRUCTION FOR MULTISCOPIC 3D DISPLAY

This thesis focuses on Intermediate View Reconstruction (IVR) which generates additional images from the available stereo images. The main application of IVR is to generate the content of multiscopic 3D displays, and it can be applied to generate different viewpoints to Free-viewpoint TV (FTV). Although IVR is considered a good approach to generate additional images, there are some problems with the reconstruction process, such as detecting and handling the occlusion areas, preserving the discontinuity at edges, and reducing image artifices through formation of the texture of the intermediate image. The occlusion area is defined as the visibility of such an area in one image and its disappearance in the other one. Solving IVR problems is considered a significant challenge for researchers. In this thesis, several novel algorithms have been specifically designed to solve IVR challenges by employing them in a highly robust intermediate view reconstruction algorithm. Computer simulation and experimental results confirm the importance of occluded areas in IVR. Therefore, we propose a novel occlusion detection algorithm and another novel algorithm to Inpaint those areas. Then, these proposed algorithms are employed in a novel occlusion-aware intermediate view reconstruction that finds an intermediate image with a given disparity between two input images. This novelty is addressed by adding occlusion awareness to the reconstruction algorithm and proposing three quality improvement techniques to reduce image artifices: filling the re-sampling holes, removing ghost contours, and handling the disocclusion area. We compared the proposed algorithms to the previously well-known algorithms on each field qualitatively and quantitatively. The obtained results show that our algorithms are superior to the previous well-known algorithms. The performance of the proposed reconstruction algorithm is tested under 13 real images and 13 synthetic images. Moreover, analysis of a human-trial experiment conducted with 21 participants confirmed that the reconstructed images from our proposed algorithm have very high quality compared with the reconstructed images from the other existing algorithms

Image-based rendering and synthesis

Multiview imaging (MVI) is currently the focus of some research as it has a wide range of applications and opens up research in other topics and applications, including virtual view synthesis for three-dimensional (3D) television (3DTV) and entertainment. However, a large amount of storage is needed by multiview systems and are difficult to construct. The concept behind allowing 3D scenes and objects to be visualized in a realistic way without full 3D model reconstruction is image-based rendering (IBR). Using images as the primary substrate, IBR has many potential applications including for video games, virtual travel and others. The technique creates new views of scenes which are reconstructed from a collection of densely sampled images or videos. The IBR concept has different classification such as knowing 3D models and the lighting conditions and be rendered using conventional graphic techniques. Another is lightfield or lumigraph rendering which depends on dense sampling with no or very little geometry for rendering without recovering the exact 3D-models.published_or_final_versio

Scalable light field representation and coding

This Thesis aims to advance the state-of-the-art in light field representation and coding. In this context, proposals to improve functionalities like light field random access and scalability are also presented. As the light field representation constrains the coding approach to be used, several light field coding techniques to exploit the inherent characteristics of the most popular types of light field representations are proposed and studied, which are normally based on micro-images or sub-aperture-images. To encode micro-images, two solutions are proposed, aiming to exploit the redundancy between neighboring micro-images using a high order prediction model, where the model parameters are either explicitly transmitted or inferred at the decoder, respectively. In both cases, the proposed solutions are able to outperform low order prediction solutions. To encode sub-aperture-images, an HEVC-based solution that exploits their inherent intra and inter redundancies is proposed. In this case, the light field image is encoded as a pseudo video sequence, where the scanning order is signaled, allowing the encoder and decoder to optimize the reference picture lists to improve coding efficiency. A novel hybrid light field representation coding approach is also proposed, by exploiting the combined use of both micro-image and sub-aperture-image representation types, instead of using each representation individually. In order to aid the fast deployment of the light field technology, this Thesis also proposes scalable coding and representation approaches that enable adequate compatibility with legacy displays (e.g., 2D, stereoscopic or multiview) and with future light field displays, while maintaining high coding efficiency. Additionally, viewpoint random access, allowing to improve the light field navigation and to reduce the decoding delay, is also enabled with a flexible trade-off between coding efficiency and viewpoint random access.Esta Tese tem como objetivo avançar o estado da arte em representação e codificação de campos de luz. Neste contexto, são também apresentadas propostas para melhorar funcionalidades como o acesso aleatório ao campo de luz e a escalabilidade. Como a representação do campo de luz limita a abordagem de codificação a ser utilizada, são propostas e estudadas várias técnicas de codificação de campos de luz para explorar as características inerentes aos seus tipos mais populares de representação, que são normalmente baseadas em micro-imagens ou imagens de sub-abertura. Para codificar as micro-imagens, são propostas duas soluções, visando explorar a redundância entre micro-imagens vizinhas utilizando um modelo de predição de alta ordem, onde os parâmetros do modelo são explicitamente transmitidos ou inferidos no decodificador, respetivamente. Em ambos os casos, as soluções propostas são capazes de superar as soluções de predição de baixa ordem. Para codificar imagens de sub-abertura, é proposta uma solução baseada em HEVC que explora a inerente redundância intra e inter deste tipo de imagens. Neste caso, a imagem do campo de luz é codificada como uma pseudo-sequência de vídeo, onde a ordem de varrimento é sinalizada, permitindo ao codificador e decodificador otimizar as listas de imagens de referência para melhorar a eficiência da codificação. Também é proposta uma nova abordagem de codificação baseada na representação híbrida do campo de luz, explorando o uso combinado dos tipos de representação de micro-imagem e sub-imagem, em vez de usar cada representação individualmente. A fim de facilitar a rápida implantação da tecnologia de campo de luz, esta Tese também propõe abordagens escaláveis de codificação e representação que permitem uma compatibilidade adequada com monitores tradicionais (e.g., 2D, estereoscópicos ou multivista) e com futuros monitores de campo de luz, mantendo ao mesmo tempo uma alta eficiência de codificação. Além disso, o acesso aleatório de pontos de vista, permitindo melhorar a navegação no campo de luz e reduzir o atraso na descodificação, também é permitido com um equilíbrio flexível entre eficiência de codificação e acesso aleatório de pontos de vista

Fehlerkaschierte Bildbasierte Darstellungsverfahren

Creating photo-realistic images has been one of the major goals in computer graphics since its early days. Instead of modeling the complexity of nature with standard modeling tools, image-based approaches aim at exploiting real-world footage directly,as they are photo-realistic by definition. A drawback of these approaches has always been that the composition or combination of different sources is a non-trivial task, often resulting in annoying visible artifacts. In this thesis we focus on different techniques to diminish visible artifacts when combining multiple images in a common image domain. The results are either novel images, when dealing with the composition task of multiple images, or novel video sequences rendered in real-time, when dealing with video footage from multiple cameras.Fotorealismus ist seit jeher eines der großen Ziele in der Computergrafik. Anstatt die Komplexität der Natur mit standardisierten Modellierungswerkzeugen nachzubauen, gehen bildbasierte Ansätze den umgekehrten Weg und verwenden reale Bildaufnahmen zur Modellierung, da diese bereits per Definition fotorealistisch sind. Ein Nachteil dieser Variante ist jedoch, dass die Komposition oder Kombination mehrerer Quellbilder eine nichttriviale Aufgabe darstellt und häufig unangenehm auffallende Artefakte im erzeugten Bild nach sich zieht. In dieser Dissertation werden verschiedene Ansätze verfolgt, um Artefakte zu verhindern oder abzuschwächen, welche durch die Komposition oder Kombination mehrerer Bilder in einer gemeinsamen Bilddomäne entstehen. Im Ergebnis liefern die vorgestellten Verfahren neue Bilder oder neue Ansichten einer Bildsammlung oder Videosequenz, je nachdem, ob die jeweilige Aufgabe die Komposition mehrerer Bilder ist oder die Kombination mehrerer Videos verschiedener Kameras darstellt

Depth Estimation from a Single Holoscopic 3D Image and Image Up-sampling with Deep-learning

This thesis was submitted for the award of Doctor of Philosophy and was awarded by Brunel University London3D depth information is widely utilized in industries such as security, autonomous vehicles, robotics, 3D printing, AR/VR entertainment, cinematography and medical science. However, state-of-the-art imaging and 3D depth-sensing technologies are rather complicated or expensive and still lack scalability and interoperability. The research identified, entails the development of an innovative technique for reliable and efficient 3D depth estimation that deliver better accuracy. The proposed (1) multilayer Holoscopic 3D encoding technique reduces the computational cost of extracting viewpoint images from complex structured Holoscopic 3D data by 95%, by using labelled multilayer elemental images. It also addresses misplacement of elemental image pixels due to lens distortion error. The multilayer Holoscopic 3D encoding computing efficiency leads to the implementation of real-time 3D depth-dependent applications. Also, (2) an innovative approach of a deep learning-based single image super-resolution framework is developed and evaluated. It identified that learning-based image up-sampling techniques could be used regardless of inadequate 3D training data, as 2D training data can yield the same results. (3) The research is extended further by implementation of an H3D depth disparity -based framework, where a Holoscopic content adaptation technique for extracting semi-segmented stereo viewpoint image is introduced, and the design of a smart 3D depth mapping technique is proposed. Particularly, it provides a somewhat accurate 3D depth estimation from H3D images in near real-time. Holoscopic 3D image has thousands of perspective elemental images from omnidirectional viewpoint images and (4) a novel 3D depth estimation technique is developed to estimates 3D depth information directly from a single Holoscopic 3D image without the loss of any angular information and the introduction of unwanted artefacts. The proposed 3D depth measurement techniques are computationally efficient and robust with high accuracy; these can be incorporated in real-time applications of autonomous vehicles, security and AR/VR for real-time interaction

3D Mesh Simplification Techniques for Enhanced Image Based Rendering

Three dimensional videos and virtual reality applications are gaining wide range of popularity in recent years. Virtual reality creates the feeling of 'being there' and provides more realistic experience than conventional 2D media. In order to feel the immersive experience, it is important to satisfy two important criteria namely, visual quality of the video and timely rendering. However, it is quite impractical to satisfy these goals, especially on low capability devices such as mobile phones. Careful analysis of the depth map and further processing may help in achieving these goals considerably. Advanced developments in the graphics hardware tremendously reduced the time required to render the images to be displayed. However, along with this development, the demand for more realism tend to increase the complexity of the model of the virtual environment. Complex models require millions of primitives which subsequently means millions of polygons to represent it. Wise selection of rendering technique offer one of the ways to reduce the rendering speed. Mesh-based rendering is one of the techniques which enhances the speed of rendering as compared to its counterpart pixel based rendering. However, due to the demand for richer experience, the number of polygons required, always seem to exceed the number of polygons the graphics hardware can efficiently render. In practice, it is not feasible to store large number of polygons because of storage limitations in mobile phone hardware. Furthermore, number of polygons increase the rendering speed, which would necessitate more powerful devices. Mesh simplification techniques offer solution to deal with complex models. These methods simplify unimportant and redundant part of the model which helps in reducing the rendering cost without negatively effecting the visual quality of the scene. Mesh simplification has been extensively studied, however, it is not applied to all the areas. For example, depth is one of the areas where general available simplification methods are not very well suitable as most of the methods do not consider depth discontinuities very well. Moreover, some of the state of the art methods are not capable of handling high resolution depth maps. In this thesis, an attempt is made to address the problem of combining the depth maps with mesh simplification. Aim of the thesis is to reduce the computational cost of rendering by taking the homogeneous and planar areas of the depth map into account, while still maintaining suitable visual quality of the rendered image. Different depth decimation techniques are implemented and compared with the available state of the art methods. We demonstrate that the depth decimation technique which fits the plane to depth area and considers the depth discontinuities, outperforms the state of the art methods clearly