761 research outputs found

    Low-Power Embedded Design Solutions and Low-Latency On-Chip Interconnect Architecture for System-On-Chip Design

    Get PDF
    This dissertation presents three design solutions to support several key system-on-chip (SoC) issues to achieve low-power and high performance. These are: 1) joint source and channel decoding (JSCD) schemes for low-power SoCs used in portable multimedia systems, 2) efficient on-chip interconnect architecture for massive multimedia data streaming on multiprocessor SoCs (MPSoCs), and 3) data processing architecture for low-power SoCs in distributed sensor network (DSS) systems and its implementation. The first part includes a low-power embedded low density parity check code (LDPC) - H.264 joint decoding architecture to lower the baseband energy consumption of a channel decoder using joint source decoding and dynamic voltage and frequency scaling (DVFS). A low-power multiple-input multiple-output (MIMO) and H.264 video joint detector/decoder design that minimizes energy for portable, wireless embedded systems is also designed. In the second part, a link-level quality of service (QoS) scheme using unequal error protection (UEP) for low-power network-on-chip (NoC) and low latency on-chip network designs for MPSoCs is proposed. This part contains WaveSync, a low-latency focused network-on-chip architecture for globally-asynchronous locally-synchronous (GALS) designs and a simultaneous dual-path routing (SDPR) scheme utilizing path diversity present in typical mesh topology network-on-chips. SDPR is akin to having a higher link width but without the significant hardware overhead associated with simple bus width scaling. The last part shows data processing unit designs for embedded SoCs. We propose a data processing and control logic design for a new radiation detection sensor system generating data at or above Peta-bits-per-second level. Implementation results show that the intended clock rate is achieved within the power target of less than 200mW. We also present a digital signal processing (DSP) accelerator supporting configurable MAC, FFT, FIR, and 3-D cross product operations for embedded SoCs. It consumes 12.35mW along with 0.167mm2 area at 333MHz

    A study to determine an efficient data format and data system for a lightweight deep space probe Final report, 30 Oct. 1965 - 30 Oct. 1966

    Get PDF
    Determination of efficient data format and data system for lightweight deep space prob

    High-Level Synthesis Based VLSI Architectures for Video Coding

    Get PDF
    High Efficiency Video Coding (HEVC) is state-of-the-art video coding standard. Emerging applications like free-viewpoint video, 360degree video, augmented reality, 3D movies etc. require standardized extensions of HEVC. The standardized extensions of HEVC include HEVC Scalable Video Coding (SHVC), HEVC Multiview Video Coding (MV-HEVC), MV-HEVC+ Depth (3D-HEVC) and HEVC Screen Content Coding. 3D-HEVC is used for applications like view synthesis generation, free-viewpoint video. Coding and transmission of depth maps in 3D-HEVC is used for the virtual view synthesis by the algorithms like Depth Image Based Rendering (DIBR). As first step, we performed the profiling of the 3D-HEVC standard. Computational intensive parts of the standard are identified for the efficient hardware implementation. One of the computational intensive part of the 3D-HEVC, HEVC and H.264/AVC is the Interpolation Filtering used for Fractional Motion Estimation (FME). The hardware implementation of the interpolation filtering is carried out using High-Level Synthesis (HLS) tools. Xilinx Vivado Design Suite is used for the HLS implementation of the interpolation filters of HEVC and H.264/AVC. The complexity of the digital systems is greatly increased. High-Level Synthesis is the methodology which offers great benefits such as late architectural or functional changes without time consuming in rewriting of RTL-code, algorithms can be tested and evaluated early in the design cycle and development of accurate models against which the final hardware can be verified

    Verilog implementation of the VESA DSC compression algorithm

    Get PDF
    O trabalho consiste em implementar em verilog o Standard de compressão VESA DSC v1.1. O projecto está na fase de teste e optimização para cumprir restrições de timming. É esperado estar concluido nos inicios de Junho. Feito isto será feita uma comparação entre uma abordagem usando ferramentes de síntese de alto nível e a abordagem "manual" (RTL

    NASA patent abstracts bibliography: A continuing bibliography. Section 1: Abstracts (supplement 38)

    Get PDF
    Abstracts are provided for 132 patents and patent applications entered into the NASA scientific and technical information system during the period July 1990 through December 1990. Each entry consists of a citation, an abstract, and in most cases, a key illustration selected from the patent or patent application

    HAL-ASOS - Linux com aceleração em hardware para sistemas operativos dedicados à aplicação

    Get PDF
    Programa doutoral em Engenharia Eletrónica e de Computadores (PDEEC) (especialidade de Informática Industrial e Sistemas Embebidos)O ecossistema de sistemas embebidos de hoje tornou-se enorme, cobrindo vários e diferentes sistemas, exigindo desempenho e mobilidade completa enquanto atingem autonomias de bateria cada vez maiores. Mas a crescente frequência de relógio que resultou em dispositivos cada vez mais rápidos começou a estagnar antes dos transístores pararem de encolher. Plataformas Field Programmable Gate Array (FPGA) são uma solução alternativa para a implementação de sistemas completos e reconfiguráveis. Fornecem desempenho e eficiência computacional para satisfazer requisitos da aplicação e do sistema embebido. Vários Sistemas Operativos (SO) assistidos por FPGA foram propostos, mas ao estreitar seu foco na síntese do datapath do acelerador de hardware, a grande maioria ignora a integração semântica destes no SO. Ambientes de síntese de alto nível (HLS) elevaram a abstração além da linguagem de transferência de registo (RTL), seguindo uma abordagem específica de domínio enquanto misturam software e abstrações de hardware ad hoc, que dificultam as otimizações. Além disso, os modelos de programação para software e hardware reconfigurável carecem de semelhanças, o que com o tempo dificultará a Exploração do Ambiente de Design (DSE) e diminuirá o potencial de reutilização de código. Para responder a estas necessidades, propomos HAL-ASOS, uma ferramenta para implementar sistemas embebidos baseados em Linux que fornece (1) elasticidade no design em conformidade com a natureza evolutiva deste SO, (2) integração semântica profunda de tarefas de hardware nos modelos de programação do Linux, (3) facilidade na gestão de complexidade através de metodologia e ferramentas para apoiar o design, verificação e implementação, (4) orientada por princípios de design híbridos e eficiência no sistema. Para avaliar as funcionalidades da ferramenta, foi implementado um aplicativo criptográfico que demonstra alcance de desempenho enquanto se emprega a metodologia de design. Novos níveis de desempenho são atingidos numa aplicação de Visão por Computador que explora recursos de programação assíncrona-síncrona. Os resultados demonstram uma abordagem flexível na reconfiguração entre hardware e software, e desempenho que aumenta consistentemente com acréscimo de recursos ou frequência de relógio.Today’s embedded systems ecosystem became huge while covering several and different computer-based systems, demanding for performance and complete mobility while experiencing longer battery lives. But the rampant frequency that resulted in faster devices began hitting a wall even before transistors stopped shrinking. Field Programmable Gate Array (FPGA) platforms are an alternative solution towards implementing complete reconfigurable systems. They provide computational power, efficiency, in a lightweight solution to serve the application requirements and increase performance in the overall system. Several FPGA-assisted Operating Systems (OS) have been proposed, but by narrowing their focus on datapath synthesis of the hardware accelerator, they completely ignore the deep semantic integration of these accelerators into the OS. State-of-the-art High-Level Synthesis (HLS) environments have raised the level of abstraction beyond Register Transfer Language (RTL) by following a domain-specific approach while mixing ad hoc software and hardware abstractions, making harder for performance optimizations. Furthermore, the programming models for software and reconfigurable hardware lack commonalities, which in time will hinder the Design Space Exploration (DSE) and lower the potential for code reuse. To overcome these issues, we propose HAL-ASOS, a framework to implement Linux-based Embedded systems which provides (1) elasticity by design to comply with the evolutive nature of Linux, (2) deep semantic integration of the hardware tasks in the Linux programming models, (3) easy complexity management using methodology and tools to fully support design, verification and deployment, (4) hybrid and efficiency-oriented design principles. To evaluate the framework functionalities, a cryptographic application was implemented and demonstrates performance achievements while using the promoted application-driven design methodology. To demonstrate new levels of performance that can be achieved, a Computer Vision application explores several mixed asynchronous-synchronous programming features. Experiments demonstrate a flexible design approach in terms of hardware and software reconfiguration, and significant performance that increases consistently with the rising in processing resources or clock frequencies.Financial support received from Portuguese Foundation for Science and Technology (FCT) with the PhD grant SFRH/BD/82732/2011

    Template-based embedded reconfigurable computing

    Get PDF
    XIV+212hlm.;24c

    Challenges and solutions in H.265/HEVC for integrating consumer electronics in professional video systems

    Get PDF

    A Reconfigurable Processor for Heterogeneous Multi-Core Architectures

    Get PDF
    A reconfigurable processor is a general-purpose processor coupled with an FPGA-like reconfigurable fabric. By deploying application-specific accelerators, performance for a wide range of applications can be improved with such a system. In this work concepts are designed for the use of reconfigurable processors in multi-tasking scenarios and as part of multi-core systems
    corecore