The Effect Of Hot Spots On The Performance Of Mesh--Based Networks

Direct network performance is affected by different design parameters which include number of virtual channels, number of ports, routing algorithm, switching technique, deadlock handling technique, packet size, and buffer size. Another factor that affects network performance is the traffic pattern. In this thesis, we study the effect of hotspot traffic on system performance. Specifically, we study the effect of hotspot factor, hotspot number, and hot spot location on the performance of mesh-based networks. Simulations are run on two network topologies, both the mesh and torus. We pay more attention to meshes because they are widely used in commercial machines. Comparisons between oblivious wormhole switching and chaotic packet switching are reported. Overall packet switching proved to be more efficient in terms of throughput when compared to wormhole switching. In the case of uniform random traffic, it is shown that the differences between chaotic and oblivious routing are indistinguishable. Networks with low number of hotspots show better performance. As the number of hotspots increases network latency tends to increase. It is shown that when the hotspot factor increases, performance of packet switching is better than that of wormhole switching. It is also shown that the location of hotspots affects network performance particularly with the oblivious routers since their achieved latencies proved to be more vulnerable to changes in the hotspot location. It is also shown that the smaller the size of the network the earlier network saturation occurs. Further, it is shown that the chaos router’s adaptivity is useful in this case. Finally, for tori, performance is not greatly affected by hotspot presence. This is mostly due to the symmetric nature of tori

Performance and Memory Space Optimizations for Embedded Systems

Embedded systems have three common principles: real-time performance, low power consumption, and low price (limited hardware). Embedded computers use chip multiprocessors (CMPs) to meet these expectations. However, one of the major problems is lack of efficient software support for CMPs; in particular, automated code parallelizers are needed. The aim of this study is to explore various ways to increase performance, as well as reducing resource usage and energy consumption for embedded systems. We use code restructuring, loop scheduling, data transformation, code and data placement, and scratch-pad memory (SPM) management as our tools in different embedded system scenarios. The majority of our work is focused on loop scheduling. Main contributions of our work are: We propose a memory saving strategy that exploits the value locality in array data by storing arrays in a compressed form. Based on the compressed forms of the input arrays, our approach automatically determines the compressed forms of the output arrays and also automatically restructures the code. We propose and evaluate a compiler-directed code scheduling scheme, which considers both parallelism and data locality. It analyzes the code using a locality parallelism graph representation, and assigns the nodes of this graph to processors.We also introduce an Integer Linear Programming based formulation of the scheduling problem. We propose a compiler-based SPM conscious loop scheduling strategy for array/loop based embedded applications. The method is to distribute loop iterations across parallel processors in an SPM-conscious manner. The compiler identifies potential SPM hits and misses, and distributes loop iterations such that the processors have close execution times. We present an SPM management technique using Markov chain based data access. We propose a compiler directed integrated code and data placement scheme for 2-D mesh based CMP architectures. Using a Code-Data Affinity Graph (CDAG) to represent the relationship between loop iterations and array data, it assigns the sets of loop iterations to processing cores and sets of data blocks to on-chip memories. We present a memory bank aware dynamic loop scheduling scheme for array intensive applications.The goal is to minimize the number of memory banks needed for executing the group of loop iterations

Hybrid Caching for Chip Multiprocessors Using Compiler-Based Data Classification

The high performance delivered by modern computer system keeps scaling with an increasingnumber of processors connected using distributed network on-chip. As a result, memory accesslatency, largely dominated by remote data cache access and inter-processor communication, is becoming a critical performance bottleneck. To release this problem, it is necessary to localize data access as much as possible while keep efficient on-chip cache memory utilization. Achieving this however, is application dependent and needs a keen insight into the memory access characteristics of the applications. This thesis demonstrates how using fairly simple thus inexpensive compiler analysis memory accesses can be classified into private data access and shared data access. In addition, we introduce a third classification named probably private access and demonstrate the impact of this category compared to traditional private and shared memory classification. The memory access classification information from the compiler analysis is then provided to the runtime system through a modified memory allocator and page table to facilitate a hybrid private-shared caching technique. The hybrid cache mechanism is aware of different data access classification and adopts appropriate placement and search policies accordingly to improve performance. Our analysis demonstrates that many applications have a significant amount of both private and shared data and that compiler analysis can identify the private data effectively for many applications. Experimentsresults show that the implemented hybrid caching scheme achieves 4.03% performance improvement over state of the art NUCA-base caching

GreenCool: An Energy-Efficient Liquid Cooling Design Technique for 3-D MPSoCs Via Channel Width Modulation

Liquid cooling using interlayer microchannels has appeared as a viable and scalable packaging technology for 3-D multiprocessor system-on-chips (MPSoCs). Microchannel-based liquid cooling, however, can substantially increase the on-chip thermal gradients, which are undesirable for reliability, performance, and cooling efficiency. In this paper, we present GreenCool, an optimal design methodology for liquid-cooled 3-D MPSoCs. GreenCool simultaneously minimizes the cooling energy for a given system while maintaining thermal gradients and peak temperatures under safe limits. This is accomplished by tuning the heat transfer characteristics of the microchannels using channel width modulation. Channel width modulation is compatible with the current process technologies and incurs minimal additional fabrication costs. Through an extensive set of experiments, we show that channel width modulation is capable of complementing and enhancing the benefits of temperature-aware floorplanning. We also experiment with a 16-core 3-D system with stacked dynamic random-access memory, for which GreenCool improves energy efficiency by up to 53% with respect to no channel modulation

Computer architecture for efficient algorithmic executions in real-time systems: New technology for avionics systems and advanced space vehicles

Improvements and advances in the development of computer architecture now provide innovative technology for the recasting of traditional sequential solutions into high-performance, low-cost, parallel system to increase system performance. Research conducted in development of specialized computer architecture for the algorithmic execution of an avionics system, guidance and control problem in real time is described. A comprehensive treatment of both the hardware and software structures of a customized computer which performs real-time computation of guidance commands with updated estimates of target motion and time-to-go is presented. An optimal, real-time allocation algorithm was developed which maps the algorithmic tasks onto the processing elements. This allocation is based on the critical path analysis. The final stage is the design and development of the hardware structures suitable for the efficient execution of the allocated task graph. The processing element is designed for rapid execution of the allocated tasks. Fault tolerance is a key feature of the overall architecture. Parallel numerical integration techniques, tasks definitions, and allocation algorithms are discussed. The parallel implementation is analytically verified and the experimental results are presented. The design of the data-driven computer architecture, customized for the execution of the particular algorithm, is discussed

Compile-time optimization of near-neighbor communication for scalable shared-memory multiprocessors

Scalable shared-memory multiprocessor systems are typically NUMA (nonuniform memory access) machines, where the exploitation of the memory hierarchy is critical to achieving high performance. Iterative data parallel loops with near-neighbor communication account for many important numerical applications. In such loops, the communication of partial results stresses the memory system performance. In this paper, we develop data placement schemes that minimize communication time where the near-neighbor interaction is determined by a stencil. Under a given loop partition, our compile-time algorithm partitions global data into four classes for each processor, with each class requiring specific consistency maintenance requirements. The ADAPT (Automatic Data Allocation and Partitioning Tool) system was implemented to automatically partition parallel code segments for the BBN TC2000, a scalable shared-memory multiprocessor. ADAPT caches global arrays and maintains data consistency in software through instructions that flush data from private caches. Restructuring of a fluid flow code segment by ADAPT improved performance by a factor of more than 3 on the BBN TC2000. Features in current generation pipelined processors with multiple functional units permit the overlap of memory accesses with computation. Our experiments on the BBN TC2000 show that the degree of overlap is limited by architectural parameters, such as the number of CPU registers.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/30342/1/0000744.pd

Classification of networks-on-chip in the context of analysis of promising self-organizing routing algorithms

This paper contains a detailed analysis of the current state of the network-on-chip (NoC) research field, based on which the authors propose the new NoC classification that is more complete in comparison with previous ones. The state of the domain associated with wireless NoC is investigated, as the transition to these NoCs reduces latency. There is an assumption that routing algorithms from classical network theory may demonstrate high performance. So, in this article, the possibility of the usage of self-organizing algorithms in a wireless NoC is also provided. This approach has a lot of advantages described in the paper. The results of the research can be useful for developers and NoC manufacturers as specific recommendations, algorithms, programs, and models for the organization of the production and technological process.Comment: 10 p., 5 fig. Oral presentation on APSSE 2021 conferenc

On-board multispectral classification study. Volume 2: Supplementary tasks

The operational tasks of the onboard multispectral classification study were defined. These tasks include: sensing characteristics for future space applications; information adaptive systems architectural approaches; data set selection criteria; and onboard functional requirements for interfacing with global positioning satellites