39 research outputs found

    Processing of Sliding Spotlight and TOPS SAR Data Using Baseband Azimuth Scaling

    Get PDF
    This paper presents an efficient phase preserving processor for the focusing of data acquired in sliding spotlight and TOPS (Terrain Observation by Progressive Scans) imaging modes. They share in common a linear variation of the Doppler centroid along the azimuth dimension, which is due to a steering of the antenna (either mechanically or electronically) throughout the data take. Existing approaches for the azimuth processing can become inefficient due to the additional processing to overcome the folding in the focused domain. In this paper a new azimuth scaling approach is presented to perform the azimuth processing, whose kernel is exactly the same for sliding spotlight and TOPS modes. The possibility to use the proposed approach to process ScanSAR data, as well as a discussion concerning staring spotlight, are also included. Simulations with point-targets and real data acquired by TerraSAR-X in sliding spotlight and TOPS modes are used to validate the developed algorithm

    Parameter estimation and error calibration for multi-channel beam-steering SAR systems

    Get PDF
    Multi-channel beam-steering synthetic aperture radar (multi-channel BS-SAR) can achieve high resolution and wide-swath observations by combining beam-steering technology and azimuth multi-channel technology. Various imaging algorithms have been proposed for multi-channel BS-SAR but the associated parameter estimation and error calibration have received little attention. This paper focuses on errors in the main parameters in multi-channel BS-SAR (the derotation rate and constant Doppler centroid) and phase inconsistency errors. These errors can significantly reduce image quality by causing coarser resolution, radiometric degradation, and appearance of ghost targets. Accurate derotation rate estimation is important to remove the spectrum aliasing caused by beam steering, and spectrum reconstruction for multi-channel sampling requires an accurate estimate of the constant Doppler centroid and phase inconsistency errors. The time shift and scaling effect of the derotation error on the azimuth spectrum are analyzed in this paper. A method to estimate the derotation rate is presented, based on time shifting, and integrated with estimation of the constant Doppler centroid. Since the Doppler histories of azimuth targets are space-variant in multi-channel BS-SAR, the conventional estimation methods of phase inconsistency errors do not work, and we present a novel method based on minimum entropy to estimate and correct these errors. Simulations validate the proposed error estimation methods

    Moving Target Azimuth Velocity Estimation for the MASA Mode Based on Sequential SAR Images

    Get PDF
    A novel azimuth velocity estimation method is proposed based on the multiple azimuth squint angles (MASA) imaging mode, acquiring sequential synthetic aperture radar images with different squint angles and time lags. The MASA mode acquisition geometry is given first, and the effect of target motion on azimuth offset and slant range offset is discussed in detail. Then, the azimuth velocity estimation accuracy is analyzed, considering the errors caused by registration, defocusing, and range velocity. Moreover, the interaction between target azimuth velocity and range velocity is studied for a better understanding of the azimuth velocity estimation error caused by the range velocity. With the proposed error compensation step, the new method can achieve a very high accuracy in azimuth velocity estimation, as verified by experimental results based on both simulated data and the TerraSAR-X data

    An improved imaging algorithm for spaceborne MAPs sliding spotlight SAR with high-resolution wide-swath capability

    Get PDF
    Conventional synthetic aperture radar (SAR) systems cannot achieve both high-resolution and wide-swath imaging simultaneously. This problem can be mitigated by employing multiple-azimuth-phases (MAPs) technology for spaceborne sliding spotlight SAR systems. However, traditional imaging algorithms have met challenges to process the data accurately, due to range model error, MAPs data reconstruction problem, high-order cross-coupling phase error and variation of Doppler parameters along the azimuth direction. Therefore, an improved imaging algorithm is proposed for solving the above problems. Firstly, a modified hyperbolic range equation (MHRE) is proposed by introducing a cubic term into the traditional hyperbolic range equation (THRE). And two curved orbit correction methods are derived based on the proposed range model. Then, a MAPs sliding spotlight data reconstruction method is introduced, which solves the spectral aliasing problem by a de-rotation operation. Finally, high-order cross-coupling phases and variation of Doppler parameters are analyzed and the corresponding compensation methods are proposed. Simulation results for point-target scene are provided to verify the effectiveness of the proposed algorithm

    High-Resolution Wide-Swath IRCI-Free MIMO SAR

    Get PDF

    An adaptive scalloping suppression method for ScanSAR images based on the Kalman filter

    Get PDF

    Imaging Formation Algorithm of the Ground and Space-Borne Hybrid BiSAR Based on Parameters Estimation from Direct Signal

    Get PDF
    This paper proposes a novel image formation algorithm for the bistatic synthetic aperture radar (BiSAR) with the configuration of a noncooperative transmitter and a stationary receiver in which the traditional imaging algorithm failed because the necessary imaging parameters cannot be estimated from the limited information from the noncooperative data provider. In the new algorithm, the essential parameters for imaging, such as squint angle, Doppler centroid, and Doppler chirp-rate, will be estimated by full exploration of the recorded direct signal (direct signal is the echo from satellite to stationary receiver directly) from the transmitter. The Doppler chirp-rate is retrieved by modeling the peak phase of direct signal as a quadratic polynomial. The Doppler centroid frequency and the squint angle can be derived from the image contrast optimization. Then the range focusing, the range cell migration correction (RCMC), and the azimuth focusing are implemented by secondary range compression (SRC) and the range cell migration, respectively. At last, the proposed algorithm is validated by imaging of the BiSAR experiment configured with china YAOGAN 10 SAR as the transmitter and the receiver platform located on a building at a height of 109 m in Jiangsu province. The experiment image with geometric correction shows good accordance with local Google images

    Radar Imaging in Challenging Scenarios from Smart and Flexible Platforms

    Get PDF
    undefine

    MirrorSAR: An HRWS Add-On for Single-Pass Multi-Baseline SAR Interferometry

    Get PDF
    This paper reports the Phase A study results of the interferometric extension of the High-Resolution Wide-Swath (HRWS) mission with three MirrorSAR satellites. According to the MirrorSAR concept, small, low cost, transponder-like receive-only satellites without radar signal demodulation, digitization, memory storage, downlink, and synchronization are added to the planned German X-band HRWS mission. The MirrorSAR satellites fly a triple helix orbit in close formation around the HRWS orbit and span multiple single-pass interferometric baselines. A comprehensive system engineering and performance analysis is provided that includes orbit formation, MirrorLink, Doppler steering, antenna pattern and swath design, multi-static echo window timing, SAR performance, height performance and coverage analysis. The overall interferometric system design analysis of Phase A is presented. The predicted performance of the global Digital Elevation Model (DEM) is improved by one order of magnitude compared to presently available global DEM products like the TanDEM-X DEM

    Seafloor depth estimation by means of interferometric synthetic aperture sonar

    Get PDF
    The topic of this thesis is relative depth estimation using interferometric sidelooking sonar. We give a thorough description of the geometry of interferometric sonar and of time delay estimation techniques. We present a novel solution for the depth estimate using sidelooking sonar, and review the cross-correlation function, the cross-uncertainty function and the phase-differencing technique. We find an elegant solution to co-registration and unwrapping by interpolating the sonar data in ground-range. Two depth estimation techniques are developed: Cross-correlation based sidescan bathymetry and synthetic aperture sonar (SAS) interferometry. We define flank length as a measure of the horizontal resolution in bathymetric maps and find that both sidescan bathymetry and SAS interferometry achieve theoretical resolutions. The vertical precision of our two methods are close to the performance predicted from the measured coherence. We study absolute phase-difference estimation using bandwidth and find a very simple split-bandwidth approach which outperforms a standard 2D phase unwrapper on complicated objects. We also examine advanced filtering of depth maps. Finally, we present pipeline surveying as an example application of interferometric SAS
    corecore