Why anthropocentric organization models don't succeed in Portugal? A cultural perspective using Hofstede's cultural dimensions

In Europe, anthropocentric organization models – an updated version of the sociotechnique approach – had their maximum expression in the Swedish model, which came to be known as “uddevalism” or “volvoism”. Several factors were presented as conditioners of this success [1], and some critical factors to the success of that organization models were pointed out for the special case of LIMS (Less Industrialized Member States), such as Portugal. Furthermore, there is some evidence that stress the lack of success of anthropocentric models in Portugal. However, in any case, it wasn’t paid much attention to the importance of culture as a booster of the introduction of new organization models. The purpose of this paper is to assess the viability of the general and exploratory hypothesis that national culture is an important factor to consider in the success of new organization models. Considering that the example which best expresses the anthropocentric approach came from Sweden, this assessment will be based on the confrontation of Portuguese and Swedish cultural characteristics using Hofstede’s cultural dimensions

Carbon capture from natural gas combined cycle power plants: Solvent performance comparison at an industrial scale

Natural gas is an important source of energy. This article addresses the problem of integrating an existing natural gas combined cycle (NGCC) power plant with a carbon capture process using various solvents. The power plant and capture process have mutual interactions in terms of the flue gas flow rate and composition vs. the extracted steam required for solvent regeneration. Therefore, evaluating solvent performance at a single (nominal) operating point is not indicative and solvent performance should be considered subject to the overall process operability and over a wide range of operating conditions. In the present research, a novel optimization framework was developed in which design and operation of the capture process are optimized simultaneously and their interactions with the upstream power plant are fully captured. The developed framework was applied for solvent comparison which demonstrated that GCCmax, a newly developed solvent, features superior performances compared to the monoethanolamine baseline solvent

Eco‐Holonic 4.0 Circular Business Model to Conceptualize Sustainable Value Chain Towards Digital Transition

The purpose of this paper is to conceptualize a circular business model based on an Eco-Holonic Architecture, through the integration of circular economy and holonic principles. A conceptual model is developed to manage the complexity of integrating circular economy principles, digital transformation, and tools and frameworks for sustainability into business models. The proposed architecture is multilevel and multiscale in order to achieve the instantiation of the sustainable value chain in any territory. The architecture promotes the incorporation of circular economy and holonic principles into new circular business models. This integrated perspective of business model can support the design and upgrade of the manufacturing companies in their respective industrial sectors. The conceptual model proposed is based on activity theory that considers the interactions between technical and social systems and allows the mitigation of the metabolic rift that exists between natural and social metabolism. This study contributes to the existing literature on circular economy, circular business models and activity theory by considering holonic paradigm concerns, which have not been explored yet. This research also offers a unique holonic architecture of circular business model by considering different levels, relationships, dynamism and contextualization (territory) aspects

Service Implementation Framework in Manufacturing Firms: A Case Study

The culture and the operational methods of service management have become a formidable competitive weapon even for manufacturing firms. The term "service factory" has been proposed for identifying that particular integration of products and services, achieved by the excellent manufacturing firm, where "service is a multidimensional concept". The creation of a service factory necessarily implies a radical change in the operational and organizational characteristics of the firm. In order to support manufacturing firms in adopting a service strategy, it is relevant on the one hand to identify the bundle of services which have to be provided for the customers and, on the other hand, to understand the implications for firm management model. As regards the first point, the paper proposes a framework which classifies the services along with two dimensions: Timedimension and target-dimension. The proposed framework is of interest for manufacturing firms because it allows a better recognition of services that are more perceptible for the customers. In the second part of the paper, authors discuss the implications of a service strategy adoption on the management model of manufacturing firms. In order to carry out this analysis, authors propose a model that combines four service dimensions with three decision-making categories (Organization, Methodologies and Technologies). In the end, the proposed framework has been applied in a sample of Italian hot water heater manufacturers and a case study analysis has been carried out

Multidisciplinary design and flight testing of a remote gas/particle airborne sensor system

The main objective of this paper is to describe the development of a remote sensing airborne air sampling system for Unmanned Aerial Systems (UAS) and provide the capability for the detection of particle and gas concentrations in real time over remote locations. The design of the air sampling methodology started by defining system architecture, and then by selecting and integrating each subsystem. A multifunctional air sampling instrument, with capability for simultaneous measurement of particle and gas concentrations was modified and integrated with ARCAA’s Flamingo UAS platform and communications protocols. As result of the integration process, a system capable of both real time geo-location monitoring and indexed-link sampling was obtained. Wind tunnel tests were conducted in order to evaluate the performance of the air sampling instrument in controlled nonstationary conditions at the typical operational velocities of the UAS platform. Once the remote fully operative air sampling system was obtained, the problem of mission design was analyzed through the simulation of different scenarios. Furthermore, flight tests of the complete air sampling system were then conducted to check the dynamic characteristics of the UAS with the air sampling system and to prove its capability to perform an air sampling mission following a specific flight path

Assessment of socio-economic configuration of value chains : a proposed analysis framework to facilitate integration of small rural producers with global agribusiness

Value chain analysis is an important tool to assess and enhance the performance of agribusiness. This paper analyzes the empirical application of a conceptual framework known as the Rural Web to evaluate the socio-economic complexity of a specific agribusiness value chain. This can be used as a complementary approach to traditional value chain analysis. The proposed framework goes beyond linear descriptions of product flows and examines how supply chains are built, shaped and reproduced over time and space, while considering social, cultural, environmental and political aspects. The results demonstrate that the proposed framework is a suitable method for value chain analysis, principally for those whose early stages are based on small and medium-sized rural actors. The Rural Web analysis offers decision-makers a platform to identify key actors not traditionally considered in value chain analysis, as well as the social interrelationships that occur at different dimensions. It also enables the identification of corrective and preventive measures to enhance agribusiness value chains

Validation of suply chain integration scales and the effect that size, level of vertical integration, industry and country have on their value

Academic literature would appear to indicate that supply chain integration is a major factor in explaining the performance of companies. The results are nevertheless inconclusive. Certain authors put forward the idea that the vast range of results obtained are due, amongst other things, to the fact that there is no exactness to the group of scales used, no-one has yet published an analysis of the measurement models nor clear benchmarks. In this paper, we present the theoretical definition of four supply chain integration scales (clients, suppliers, external and internal) and the convergent and discriminant validity of a measurement instrument based on a list of items taken from earlier papers. We also propose a benchmark to interpret the scales by percentiles, using a diverse international sampling broken down into sub-samples based on sector, type of company, size of company and degree of vertical integration.Ministerio de Ciencia e Innovación DPI2010-18243Ministerio de Educación y Ciencia DPI2006-0553

Energy efficiency in discrete-manufacturing systems: insights, trends, and control strategies

Since the depletion of fossil energy sources, rising energy prices, and governmental regulation restrictions, the current manufacturing industry is shifting towards more efficient and sustainable systems. This transformation has promoted the identification of energy saving opportunities and the development of new technologies and strategies oriented to improve the energy efficiency of such systems. This paper outlines and discusses most of the research reported during the last decade regarding energy efficiency in manufacturing systems, the current technologies and strategies to improve that efficiency, identifying and remarking those related to the design of management/control strategies. Based on this fact, this paper aims to provide a review of strategies for reducing energy consumption and optimizing the use of resources within a plant into the context of discrete manufacturing. The review performed concerning the current context of manufacturing systems, control systems implemented, and their transformation towards Industry 4.0 might be useful in both the academic and industrial dimension to identify trends and critical points and suggest further research lines.Peer ReviewedPreprin