Procedural modelling of terrains with constraints

Terrain is an essential part of any outdoor environment and, consequently, many techniques have appeared that deal with the problem of its automatic generation, such as procedural modeling. One form to create terrains is using noise functions because its low computational cost and its random result. However, the randomness of these functions also makes it difficult to have any control over the result obtained. In order to solve the problem of lack of control, this paper presents a new method noise-based that allows procedural terrains creation with elevation constraints (GPS routes, points of interest and areas of interest). For this, the method establishes the restrictions as fixed values in the heightmap function and creates a system of equations to obtain all points that they depend this restrictions. In this way, the terrain obtained maintains the random noise, but including the desired restrictions. The paper also includes how we apply this method on large terrain models without losing resolution or increasing the computational cost excessively. The results show that our method makes it possible to integrate this kind of constraints with high accuracy and realism while preserving the natural appearance of the procedural generation

Modeling dendritic shapes - using path planning

Dendritic shapes are commonplace in the natural world such as trees, lichens, coral and lightning. Models of dendritic shapes are widely needed in many areas. Because of their branching fractal and erratic structures modeling dendritic shapes is a tricky task. Existing methods for modeling dendritic shapes are slow and complicated.In this thesis we present a procedural algorithm of using path planning to model dendritic shapes. We generate a dendrite by finding the least-cost paths from multiple endpoints to a common generator and use the dendrite to build the geometric model. With the control handles of endpoint placement, fractal shape, edge weights distribution and path width, we create different shapes of dendrites that simulate different kinds of dendritic shapes very well. Compared with some existing methods, our algorithm is fast and simple

An integrated study of earth resources in the state of California using remote sensing techniques

The author has identified the following significant results. The effects on estimates of monthly volume runoff were determined separately for each of the following parameters: precipitation, evapotranspiration, lower zone and upper zone tension water capacity, imperviousness of the watershed, and percent of the watershed occupied by riparian vegetation, streams, and lakes. The most sensitive and critical parameters were found to be precipitation during the entire year and springtime evapotranspiration

Space exploration: The interstellar goal and Titan demonstration

Automated interstellar space exploration is reviewed. The Titan demonstration mission is discussed. Remote sensing and automated modeling are considered. Nuclear electric propulsion, main orbiting spacecraft, lander/rover, subsatellites, atmospheric probes, powered air vehicles, and a surface science network comprise mission component concepts. Machine, intelligence in space exploration is discussed

Physically Based Tree Rendering

This project produced and rendered physically based models of several tree species in real time. This was accomplished by procedurally generating a branch hierarchy and leaves within some bounding volumes according to rules that define a tree species. Multiple trees can be rendered at interactive frame rates greater than 45 frames per second. This enables the production of more realistic forests in games and visual applications procedurally and also frees up disk space for other resources because large model files of trees do not need to be stored on disk

Procedural City Generation with Combined Architectures for Real-time Visualization

The work and research of this paper sought to build upon traditional city generation and simulation in creating a tool that both realistically simulates cities and their prominent features and also creates aesthetic and artistically rich cities using assets that combine several contemporary or near contemporary architectural styles. The major city features simulated are the surrounding terrain, road networks, individual buildings, and building placement. The tools used to both create and integrate these features were created in Houdini with Unreal Engine 5 as the intended final destination. This research was influenced by the city, town, and road networking of Ghost Recon:Wildlands. Both games exhibit successful creation and integration of cities in a real-time open world that creates a holistic and visually compelling experience. The software used in the development of this project were Houdini, Maya, Unreal Engine 5, and Zbrush, as well as Adobe Substance Designer, Substance Painter, and Photoshop. The city generation tool was built with the intent that it would be flexible. In this context flexibility refers to the capability to create many different kinds of city regions based on user specifications. Region size, road density and connectivity, and building types are examples of qualities of the city that can be directly controlled. The tool currently uses one set of city assets created with intent for use together and an overall design cohesion but is also built flexibly enough that new building assets could be included, only requiring the addition of building generators for the new set. Alternatively, assets developed with the current generation methods in mind could also be used to change the visual style of the city. Buildings were both generated and placed based on a district classification. Buildings were established as small residential, large residential, religious buildings, and government/commercial before being placed in appropriate locations in the city based on user district specifications

An Adjectival Interface for procedural content generation

Includes abstract.Includes bibliographical references.In this thesis, a new interface for the generation of procedural content is proposed, in which the user describes the content that they wish to create by using adjectives. Procedural models are typically controlled by complex parameters and often require expert technical knowledge. Since people communicate with each other using language, an adjectival interface to the creation of procedural content is a natural step towards addressing the needs of non-technical and non-expert users. The key problem addressed is that of establishing a mapping between adjectival descriptors, and the parameters employed by procedural models. We show how this can be represented as a mapping between two multi-dimensional spaces, adjective space and parameter space, and approximate the mapping by applying novel function approximation techniques to points of correspondence between the two spaces. These corresponding point pairs are established through a training phase, in which random procedural content is generated and then described, allowing one to map from parameter space to adjective space. Since we ultimately seek a means of mapping from adjective space to parameter space, particle swarm optimisation is employed to select a point in parameter space that best matches any given point in adjective space. The overall result, is a system in which the user can specify adjectives that are then used to create appropriate procedural content, by mapping the adjectives to a suitable set of procedural parameters and employing the standard procedural technique using those parameters as inputs. In this way, none of the control offered by procedural modelling is sacrificed â although the adjectival interface is simpler, it can at any point be stripped away to reveal the standard procedural model and give users access to the full set of procedural parameters. As such, the adjectival interface can be used for rapid prototyping to create an approximation of the content desired, after which the procedural parameters can be used to fine-tune the result. The adjectival interface also serves as a means of intermediate bridging, affording users a more comfortable interface until they are fully conversant with the technicalities of the underlying procedural parameters. Finally, the adjectival interface is compared and contrasted to an interface that allows for direct specification of the procedural parameters. Through user experiments, it is found that the adjectival interface presented in this thesis is not only easier to use and understand, but also that it produces content which more accurately reflects usersâ intentions

Geographic Information Science (GIScience) and Geospatial Approaches for the Analysis of Historical Visual Sources and Cartographic Material

This book focuses on the use of GIScience in conjunction with historical visual sources to resolve past scenarios. The themes, knowledge gained and methodologies conducted might be of interest to a variety of scholars from the social science and humanities disciplines

Investigation related to multispectral imaging systems

A summary of technical progress made during a five year research program directed toward the development of operational information systems based on multispectral sensing and the use of these systems in earth-resource survey applications is presented. Efforts were undertaken during this program to: (1) improve the basic understanding of the many facets of multispectral remote sensing, (2) develop methods for improving the accuracy of information generated by remote sensing systems, (3) improve the efficiency of data processing and information extraction techniques to enhance the cost-effectiveness of remote sensing systems, (4) investigate additional problems having potential remote sensing solutions, and (5) apply the existing and developing technology for specific users and document and transfer that technology to the remote sensing community

Trophic classification of selected Colorado lakes

Multispectral scanner data, acquired over several Colorado lakes using LANDSAT-1 and aircraft, were used in conjunction with contact-sensed water quality data to determine the feasibility of assessing lacustrine trophic levels. A trophic state index was developed using contact-sensed data for several trophic indicators. Relationships between the digitally processed multispectral scanner data, several trophic indicators, and the trophic index were examined using a supervised multispectral classification technique and regression techniques. Statistically significant correlations exist between spectral bands, several of the trophic indicators and the trophic state index. Color-coded photomaps were generated which depict the spectral aspects of trophic state