Preprocessing reference sensor pattern noise via spectrum equalization

Although sensor pattern noise (SPN) has been proven to be an effective means to uniquely identify digital cameras, some non-unique artifacts, shared amongst cameras undergo the same or similar in-camera processing procedures, often give rise to false identifications. Therefore, it is desirable and necessary to suppress these unwanted artifacts so as to improve the accuracy and reliability. In this work, we propose a novel preprocessing approach for attenuating the influence of the nonunique artifacts on the reference SPN to reduce the false identification rate. Specifically, we equalize the magnitude spectrum of the reference SPN through detecting and suppressing the peaks according to the local characteristics, aiming at removing the interfering periodic artifacts. Combined with 6 SPN extraction or enhancement methods, our proposed Spectrum Equalization Algorithm (SEA) is evaluated on the Dresden image database as well as our own database, and compared with the state-of-the-art preprocessing schemes. Experimental results indicate that the proposed procedure outperforms, or at least performs comparably to, the existing methods in terms of the overall ROC curve and kappa statistic computed from a confusion matrix, and tends to be more resistant to JPEG compression for medium and small image blocks

Color space analysis for iris recognition

This thesis investigates issues related to the processing of multispectral and color infrared images of the iris. When utilizing the color bands of the electromagnetic spectrum, the eye color and the components of texture (luminosity and chromaticity) must be considered. This work examines the effect of eye color on texture-based iris recognition in both the near-IR and visible bands. A novel score level fusion algorithm for multispectral iris recognition is presented in this regard. The fusion algorithm - based on evidence that matching performance of a texture-based encoding scheme is impacted by the quality of texture within the original image - ranks the spectral bands of the image based on texture quality and designs a fusion rule based on these rankings. Color space analysis, to determine an optimal representation scheme, is also examined in this thesis. Color images are transformed from the sRGB color space to the CIE Lab, YCbCr, CMYK and HSV color spaces prior to encoding and matching. Also, enhancement methods to increase the contrast of the texture within the iris, without altering the chromaticity of the image, are discussed. Finally, cross-band matching is performed to illustrate the correlation between eye color and specific bands of the color image

Detecção de vivacidade de impressões digitais baseada em software

Orientador: Roberto de Alencar LotufoDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Elétrica e de ComputaçãoResumo: Com o uso crescente de sistemas de autenticação por biometria nos últimos anos, a detecção de impressões digitais falsas tem se tornado cada vez mais importante. Neste trabalho, nós implementamos e comparamos várias técnicas baseadas em software para detecção de vivacidade de impressões digitais. Utilizamos como extratores de características as redes convolucionais, que foram usadas pela primeira vez nesta área, e Local Binary Patterns (LBP). As técnicas foram usadas em conjunto com redução de dimensionalidade através da Análise de Componentes Principais (PCA) e um classificador Support Vector Machine (SVM). O aumento artificial de dados foi usado de forma bem sucedida para melhorar o desempenho do classificador. Testamos uma variedade de operações de pré-processamento, tais como filtragem em frequência, equalização de contraste e filtragem da região de interesse. Graças aos computadores de alto desempenho disponíveis como serviços em nuvem, foi possível realizar uma busca extensa e automática para encontrar a melhor combinação de operações de pré-processamento, arquiteturas e hiper-parâmetros. Os experimentos foram realizados nos conjuntos de dados usados nas competições Liveness Detection nos anos de 2009, 2011 e 2013, que juntos somam quase 50.000 imagens de impressões digitais falsas e verdadeiras. Nosso melhor método atinge uma taxa média de amostras classificadas corretamente de 95,2%, o que representa uma melhora de 59% na taxa de erro quando comparado com os melhores resultados publicados anteriormenteAbstract: With the growing use of biometric authentication systems in the past years, spoof fingerprint detection has become increasingly important. In this work, we implemented and compared various techniques for software-based fingerprint liveness detection. We use as feature extractors Convolutional Networks with random weights, which are applied for the first time for this task, and Local Binary Patterns. The techniques were used in conjunction with dimensionality reduction through Principal Component Analysis (PCA) and a Support Vector Machine (SVM) classifier. Dataset Augmentation was successfully used to increase classifier¿s performance. We tested a variety of preprocessing operations such as frequency filtering, contrast equalization, and region of interest filtering. An automatic and extensive search for the best combination of preprocessing operations, architectures and hyper-parameters was made, thanks to the fast computers available as cloud services. The experiments were made on the datasets used in The Liveness Detection Competition of years 2009, 2011 and 2013 that comprise almost 50,000 real and fake fingerprints¿ images. Our best method achieves an overall rate of 95.2% of correctly classified samples - an improvement of 59% in test error when compared with the best previously published resultsMestradoEnergia EletricaMestre em Engenharia Elétric

Enhancing sensor pattern noise via filtering distortion removal

In this work, we propose a method to obtain higher quality sensor pattern noise (SPN) for identifying source cameras. We believe that some components of SPN have been severely contaminated by the errors introduced by denoising filters and the quality of SPN can be improved by abandoning those components. In our proposed method, some coefficients with higher denoising errors are abandoned in the wavelet representation of SPN and the remaining wavelet coefficients are further enhanced to suppress the scene details in the SPN. These two steps aim to provide better SPN with higher signalto-noise ratio (SNR) and therefore improve the identification performance. The experimental results on 2,000 images captured by 10 cameras (each responsible for 200 images), show that our method achieves better receiver operating characteristic (ROC) performance when compared with some state-of-the-art methods

Adaptive Blind MPSK Constellation Recovery and Equalization for Cognitive Radio Applications

Cognitive radio is considered a relevant communication paradigm to deal with the increasing demands in modern communications systems. Adaptive schemes are required to recognize channel conditions and to properly adjust main transmission parameters to improve the quality of communications. In this direction, blind algorithms to recover constellation, from phase-modulated signals, represent a means to implement cognitive capabilities to allow automatic modulation recognition (AMR) on receivers. Commonly, the most popular approaches for blind constellation recovery are based on a two-step scheme. The first step uses to equalize channel effects and reduce inter-symbol interference (ISI). The second step carries out constellation recovery utilizing phase locked loop (PLL) systems like the Costas Loop, then to classify the incoming signal. This work proposes a novel single-step blind adaptive filter solution, inspired by an adaptive interference canceler, for joint equalization and constellation symbol recovery from received phase shift keying (PSK) waveforms. Furthermore, we propose new coefficients update mechanisms based on the constant amplitude of PSK signals. The proposed solution exhibits reduced computational complexity compared to the state of the art and a reduced time of convergence. Additionally, the proposed scheme does not require a training sequence to operate properly. The obtained results clearly show that the proposed scheme significantly improves accuracy regarding phase symbol estimation and ISI reduction.This work has been partially funded by the Spanish National project IRENE-EARTH (PID2020-115323RB-C33 / AEI / 10.13039/501100011033) as well as by the Federal Ministry of Education and Research (BMBF, Germany) within the 6G Research and Innovation Cluster 6G-RIC under Grant 16KISK020K.Publicad

Fingerprint recognition: A study on image enhancement and minutiae extraction

Fingerprints are a great source for identification of individuals. Fingerprint recognition is one of the oldest forms of biometric identification. However obtaining a good fingerprint image is not always easy. So the fingerprint image must be preprocessed before matching. The objective of this project is to present a better and enhanced fingerprint image. We have studied the factors relating to obtaining high performance feature points detection algorithm, such as image quality, segmentation, image enhancement and feature detection. Commonly used features for improving fingerprint image quality are Fourier spectrum energy, Gabor filter energy and local orientation. Accurate segmentation of fingerprint ridges from noisy background is necessary. For efficient enhancement and feature extraction algorithms, the segmented features must be void of any noise. A preprocessing method consisting of field orientation, ridge frequency estimation, Gabor filtering, segmentation and enhancement is performed. The obtained image is applied to a thinning algorithm and subsequent minutiae extraction. The methodology of image preprocessing and minutiae extraction is discussed. The simulations are performed in the MATLAB environment to evaluate the performance of the implemented algorithms. Results and observations of the fingerprint images are presented at the end

Hyperspectral Imaging for Landmine Detection

This PhD thesis aims at investigating the possibility to detect landmines using hyperspectral imaging. Using this technology, we are able to acquire at each pixel of the image spectral data in hundreds of wavelengths. So, at each pixel we obtain a reflectance spectrum that is used as fingerprint to identify the materials in each pixel, and mainly in our project help us to detect the presence of landmines. The proposed process works as follows: a preconfigured drone (hexarotor or octorotor) will carry the hyperspectral camera. This programmed drone is responsible of flying over the contaminated area in order to take images from a safe distance. Various image processing techniques will be used to treat the image in order to isolate the landmine from the surrounding. Once the presence of a mine or explosives is suspected, an alarm signal is sent to the base station giving information about the type of the mine, its location and the clear path that could be taken by the mine removal team in order to disarm the mine. This technology has advantages over the actually used techniques: • It is safer because it limits the need of humans in the searching process and gives the opportunity to the demining team to detect the mines while they are in a safe region. • It is faster. A larger area could be cleared in a single day by comparison with demining techniques • This technique can be used to detect at the same time objects other than mines such oil or minerals. First, a presentation of the problem of landmines that is expanding worldwide referring to some statistics from the UN organizations is provided. In addition, a brief presentation of different types of landmines is shown. Unfortunately, new landmines are well camouflaged and are mainly made of plastic in order to make their detection using metal detectors harder. A summary of all landmine detection techniques is shown to give an idea about the advantages and disadvantages of each technique. In this work, we give an overview of different projects that worked on the detection of landmines using hyperspectral imaging. We will show the main results achieved in this field and future work to be done in order to make this technology effective. Moreover, we worked on different target detection algorithms in order to achieve high probability of detection with low false alarm rate. We tested different statistical and linear unmixing based methods. In addition, we introduced the use of radial basis function neural networks in order to detect landmines at subpixel level. A comparative study between different detection methods will be shown in the thesis. A study of the effect of dimensionality reduction using principal component analysis prior to classification is also provided. The study shows the dependency between the two steps (feature extraction and target detection). The selection of target detection algorithm will define if feature extraction in previous phase is necessary. A field experiment has been done in order to study how the spectral signature of landmine will change depending on the environment in which the mine is planted. For this, we acquired the spectral signature of 6 types of landmines in different conditions: in Lab where specific source of light is used; in field where mines are covered by grass; and when mines are buried in soil. The results of this experiment are very interesting. The signature of two types of landmines are used in the simulations. They are a database necessary for supervised detection of landmines. Also we extracted some spectral characteristics of landmines that would help us to distinguish mines from background