Economic and environmental strategies for process design

This paper first addresses the definition of various objectives involved in eco-efficient processes, taking simultaneously into account ecological and economic considerations. The environmental aspect at the preliminary design phase of chemical processes is quantified by using a set of metrics or indicators following the guidelines of sustainability concepts proposed by . The resulting multiobjective problem is solved by a genetic algorithm following an improved variant of the so-called NSGA II algorithm. A key point for evaluating environmental burdens is the use of the package ARIANE™, a decision support tool dedicated to the management of plants utilities (steam, electricity, hot water, etc.) and pollutants (CO2, SO2, NO, etc.), implemented here both to compute the primary energy requirements of the process and to quantify its pollutant emissions. The well-known benchmark process for hydrodealkylation (HDA) of toluene to produce benzene, revisited here in a multiobjective optimization way, is used to illustrate the approach for finding eco-friendly and cost-effective designs. Preliminary biobjective studies are carried out for eliminating redundant environmental objectives. The trade-off between economic and environmental objectives is illustrated through Pareto curves. In order to aid decision making among the various alternatives that can be generated after this step, a synthetic evaluation method, based on the so-called Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) (), has been first used. Another simple procedure named FUCA has also been implemented and shown its efficiency vs. TOPSIS. Two scenarios are studied; in the former, the goal is to find the best trade-off between economic and ecological aspects while the latter case aims at defining the best compromise between economic and more strict environmental impact

Living Innovation Laboratory Model Design and Implementation

Living Innovation Laboratory (LIL) is an open and recyclable way for multidisciplinary researchers to remote control resources and co-develop user centered projects. In the past few years, there were several papers about LIL published and trying to discuss and define the model and architecture of LIL. People all acknowledge about the three characteristics of LIL: user centered, co-creation, and context aware, which make it distinguished from test platform and other innovation approaches. Its existing model consists of five phases: initialization, preparation, formation, development, and evaluation. Goal Net is a goal-oriented methodology to formularize a progress. In this thesis, Goal Net is adopted to subtract a detailed and systemic methodology for LIL. LIL Goal Net Model breaks the five phases of LIL into more detailed steps. Big data, crowd sourcing, crowd funding and crowd testing take place in suitable steps to realize UUI, MCC and PCA throughout the innovation process in LIL 2.0. It would become a guideline for any company or organization to develop a project in the form of an LIL 2.0 project. To prove the feasibility of LIL Goal Net Model, it was applied to two real cases. One project is a Kinect game and the other one is an Internet product. They were both transformed to LIL 2.0 successfully, based on LIL goal net based methodology. The two projects were evaluated by phenomenography, which was a qualitative research method to study human experiences and their relations in hope of finding the better way to improve human experiences. Through phenomenographic study, the positive evaluation results showed that the new generation of LIL had more advantages in terms of effectiveness and efficiency.Comment: This is a book draf

Towards a kansei-based user modeling methodology for eco-design

We propose here to highlight the benefits of building a framework linking Kansei Design (KD), User Centered Design (UCD) and Eco-design, as the correlation between these fields is barely explored in research at the current time. Therefore, we believe Kansei Design could serve the goal of achieving more sustainable products by setting up an accurate understanding of the user in terms of ecological awareness, and consequently enhancing performance in the Eco-design process. In the same way, we will consider the means-end chain approach inspired from marketing research, as it is useful for identifying ecological values, mapping associated functions and defining suitable design solutions. Information gathered will serve as entry data for conducting scenario-based design, and supporting the development of an Eco-friendly User Centered Design methodology (EcoUCD).ANR-ECOUS

Environmental, human health and socio-economic effects of cement powders: The multicriteria analysis as decisional methodology

The attention to sustainability-related issues has grown fast in recent decades. The experience gained with these themes reveals the importance of considering this topic in the construction industry, which represents an important sector throughout the world. This work consists on conducting a multicriteria analysis of four cement powders, with the objective of calculating and analysing the environmental, human health and socio-economic effects of their production processes. The economic, technical, environmental and safety performances of the examined powders result from official, both internal and public, documents prepared by the producers. The Analytic Hierarchy Process permitted to consider several indicators (i.e., environmental, human health related and socio-economic parameters) and to conduct comprehensive and unbiased analyses which gave the best, most sustainable cement powder. As assumed in this study, the contribution of each considered parameter to the overall sustainability has a different incidence, therefore the procedure could be used to support on-going sustainability efforts under different conditions. The results also prove that it is not appropriate to regard only one parameter to identify the ‘best’ cement powder, but several impact categories should be considered and analysed if there is an interest for pursuing different, often conflicting interests

Redesign optimization for manufacturing using additive layer techniques

Improvements in additive manufacturing technologies have the potential to greatly provide value to designers that could also contribute towards improving the sustainability levels of products as well as the production of lightweight products. With these improvements, it is possible to eliminate the design restrictions previously faced by manufacturers. This study examines the principles of additive manufacturing, design guidelines, capabilities of the manufacturing processes and structural optimisation using topology optimisation. Furthermore, a redesign methodology is proposed and illustrated through a redesign case study of an existing bracket. The optimal design is selected using multi-criteria decision analysis method. The challenges for using additive manufacturing technologies are discussed

Consumer Willingness-To-Pay for Different Organic Certification Logos in Turkey

Using data from focus group discussions with consumers and a choice experimentconducted in some of Turkey’s major cities, this study investigates whetherTurkish consumers prefer certain organic labelling schemes over others attemptsand to elicit their willingness to pay (WTP) for different organic certificationlogos. Although the level of awareness regarding organic certification logos waslow, consumers’ perceptions of the logos were generally positive. The results ofthe random parameter logit models indicated a positive WTP for the presence ofone of the three tested certification body logos in addition to the mandatorygovernmental logo. Given the low level of certification logo awareness, theconclusion is that both purchasing decisions and perceptions regarding logoswere affected by subjective criteria. Both the government and certification bodiesshould develop measures to increase consumer awareness of their logos and formconsumer perceptions and attitudes regarding the quality of the certificationimplied by the logo

Consumer Preferences for Fruit and Vegetables with Credence-Based Attributes: A Review

credence goods, consumer preferences and attitudes, sustainable fruit and vegetables, consumer research., Agricultural Finance, Consumer/Household Economics, Demand and Price Analysis, Food Consumption/Nutrition/Food Safety, Institutional and Behavioral Economics, Marketing, Productivity Analysis,

A robust fuzzy possibilistic AHP approach for partner selection in international strategic alliance

The international strategic alliance is an inevitable solution for making competitive advantage and reducing the risk in today’s business environment. Partner selection is an important part in success of partnerships, and meanwhile it is a complicated decision because of various dimensions of the problem and inherent conflicts of stockholders. The purpose of this paper is to provide a practical approach to the problem of partner selection in international strategic alliances, which fulfills the gap between theories of inter-organizational relationships and quantitative models. Thus, a novel Robust Fuzzy Possibilistic AHP approach is proposed for combining the benefits of two complementary theories of inter-organizational relationships named, (1) Resource-based view, and (2) Transaction-cost theory and considering Fit theory as the perquisite of alliance success. The Robust Fuzzy Possibilistic AHP approach is a noveldevelopment of Interval-AHP technique employing robust formulation; aimed at handling the ambiguity of the problem and let the use of intervals as pairwise judgments. The proposed approach was compared with existing approaches, and the results show that it provides the best quality solutions in terms of minimum error degree. Moreover, the framework implemented in a case study and its applicability were discussed

Consumer attitudes towards sustainability attributes on food labels

With current concerns about climate change and the general status of the environment, there is an increasing expectation that products have sustainability credentials, and that these can be verified. Labelling is a common method of communicating certain product attributes to consumers that may influence their choices. There are different types of labels with several functions. The aim of this study is to investigate consumers‟ purchase decisions towards certain sustainability claims on food products, particularly by displaying the reduction of carbon emissions. Choice outcomes will be evaluated using Discrete Choice Modelling (DCM). Data for the study is obtained by a web-based consumer survey undertaken in the United Kingdom (UK). Results provide information on different attributes effects on consumers‟ purchase decisions, particularly their willingness to pay. This study provides information on consumers‟ attitudes that will assist industries and firms to benefit from market opportunities, in particular assessing the methods by which carbon footprinting measures can be incorporated alongside information on other sustainability criteria in product marketing.food labeling, carbon footprint, discrete choice modeling, Agribusiness, Agricultural and Food Policy, Consumer/Household Economics, Environmental Economics and Policy, Food Security and Poverty, Health Economics and Policy,