15 research outputs found

    Single-Microphone Speech Dereverberation based on Multiple-Step Linear Predictive Inverse Filtering and Spectral Subtraction

    Get PDF
    Single-channel speech dereverberation is a challenging problem of deconvolution of reverberation, produced by the room impulse response, from the speech signal, when only one observation of the reverberant signal (one microphone) is available. Although reverberation in mild levels is helpful in perceiving the speech (or any audio) signal, the adverse effect of reverberation, particularly at high levels, could both deteriorate the performance of automatic recognition systems and make it less intelligible by humans. Single-microphone speech dereverberation is more challenging than multi-microphone speech dereverberation, since it does not allow for spatial processing of different observations of the signal. A review of the recent single-channel dereverberation techniques reveals that, those based on LP-residual enhancement are the most promising ones. On the other hand, spectral subtraction has also been effectively used for dereverberation particularly when long reflections are involved. By using LP-residuals and spectral subtraction as two promising tools for dereverberation, a new dereverberation technique is proposed. The first stage of the proposed technique consists of pre-whitening followed by a delayed long-term LP filtering whose kurtosis or skewness of LP-residuals is maximized to control the weight updates of the inverse filter. The second stage consists of nonlinear spectral subtraction. The proposed two-stage dereverberation scheme leads to two separate algorithms depending on whether kurtosis or skewness maximization is used to establish a feedback function for the weight updates of the adaptive inverse filter. It is shown that the proposed algorithms have several advantages over the existing major single-microphone methods, including a reduction in both early and late reverberations, speech enhancement even in the case of very high reverberation time, robustness to additive background noise, and introducing only a few minor artifacts. Equalized room impulse responses by the proposed algorithms have less reverberation times. This means the inverse-filtering by the proposed algorithms is more successful in dereverberating the speech signal. For short, medium and high reverberation times, the signal-to-reverberation ratio of the proposed technique is significantly higher than that of the existing major algorithms. The waveforms and spectrograms of the inverse-filtered and fully-processed signals indicate the superiority of the proposed algorithms. Assessment of the overall quality of the processed speech signals by automatic speech recognition and perceptual evaluation of speech quality test also confirms that in most cases the proposed technique yields higher scores and in the cases that it does not do so, the difference is not as significant as the other aspects of the performance evaluation. Finally, the robustness of the proposed algorithms against the background noise is investigated and compared to that of the benchmark algorithms, which shows that the proposed algorithms are capable of maintaining a rather stable performance for contaminated speech signals with SNR levels as low as 0 dB

    Speech Dereverberation Based on Multi-Channel Linear Prediction

    Get PDF
    Room reverberation can severely degrade the auditory quality and intelligibility of the speech signals received by distant microphones in an enclosed environment. In recent years, various dereverberation algorithms have been developed to tackle this problem, such as beamforming and inverse filtering of the room transfer function. However, this kind of methods relies heavily on the precise estimation of either the direction of arrival (DOA) or room acoustic characteristics. Thus, their performance is very much limited. A more promising category of dereverberation algorithms has been developed based on multi-channel linear predictor (MCLP). This idea was first proposed in time domain where speech signal is highly correlated in a short period of time. To ensure a good suppression of the reverberation, the prediction filter length is required to be longer than the reverberation time. As a result, the complexity of this algorithm is often unacceptable because of large covariance matrix calculation. To overcome this disadvantage, this thesis focuses on the MCLP dereverberation methods performed in the short-time Fourier transform (STFT) domain. Recently, the weighted prediction error (WPE) algorithm has been developed and widely applied to speech dereverberation. In WPE algorithm, MCLP is used in the STFT domain to estimate the late reverberation components from previous frames of the reverberant speech. The enhanced speech is obtained by subtracting the late reverberation from the reverberant speech. Each STFT coefficient is assumed to be independent and obeys Gaussian distribution. A maximum likelihood (ML) problem is formulated in each frequency bin to calculate the predictor coefficients. In this thesis, the original WPE algorithm is improved in two aspects. First, two advanced statistical models, generalized Gaussian distribution (GGD) and Laplacian distribution, are employed instead of the classic Gaussian distribution. Both of them are shown to give better modeling of the histogram of the clean speech. Second, we focus on improving the estimation of the variances of the STFT coefficients of the desired signal. In the original WPE algorithm, the variances are estimated in each frequency bin independently without considering the cross-frequency correlation. Thus, we integrate the nonnegative matrix factorization (NMF) into the WPE algorithm to refine the estimation of the variances and hence obtain a better dereverberation performance. Another category of MCLP based dereverberation algorithm has been proposed in literature by exploiting the sparsity of the STFT coefficients of the desired signal for calculating the predictor coefficients. In this thesis, we also investigate an efficient algorithm based on the maximization of the group sparsity of desired signal using mixed norms. Inspired by the idea of sparse linear predictor (SLP), we propose to include a sparse constraint for the predictor coefficients in order to further improve the dereverberation performance. A weighting parameter is also introduced to achieve a trade-off between the sparsity of the desired signal and the predictor coefficients. Computer simulation of the proposed dereverberation algorithms is conducted. Our experimental results show that the proposed algorithms can significantly improve the quality of reverberant speech signal under different reverberation times. Subjective evaluation also gives a more intuitive demonstration of the enhanced speech intelligibility. Performance comparison also shows that our algorithms outperform some of the state-of-the-art dereverberation techniques

    Single- and multi-microphone speech dereverberation using spectral enhancement

    Get PDF
    In speech communication systems, such as voice-controlled systems, hands-free mobile telephones, and hearing aids, the received microphone signals are degraded by room reverberation, background noise, and other interferences. This signal degradation may lead to total unintelligibility of the speech and decreases the performance of automatic speech recognition systems. In the context of this work reverberation is the process of multi-path propagation of an acoustic sound from its source to one or more microphones. The received microphone signal generally consists of a direct sound, reflections that arrive shortly after the direct sound (commonly called early reverberation), and reflections that arrive after the early reverberation (commonly called late reverberation). Reverberant speech can be described as sounding distant with noticeable echo and colouration. These detrimental perceptual effects are primarily caused by late reverberation, and generally increase with increasing distance between the source and microphone. Conversely, early reverberations tend to improve the intelligibility of speech. In combination with the direct sound it is sometimes referred to as the early speech component. Reduction of the detrimental effects of reflections is evidently of considerable practical importance, and is the focus of this dissertation. More specifically the dissertation deals with dereverberation techniques, i.e., signal processing techniques to reduce the detrimental effects of reflections. In the dissertation, novel single- and multimicrophone speech dereverberation algorithms are developed that aim at the suppression of late reverberation, i.e., at estimation of the early speech component. This is done via so-called spectral enhancement techniques that require a specific measure of the late reverberant signal. This measure, called spectral variance, can be estimated directly from the received (possibly noisy) reverberant signal(s) using a statistical reverberation model and a limited amount of a priori knowledge about the acoustic channel(s) between the source and the microphone(s). In our work an existing single-channel statistical reverberation model serves as a starting point. The model is characterized by one parameter that depends on the acoustic characteristics of the environment. We show that the spectral variance estimator that is based on this model, can only be used when the source-microphone distance is larger than the so-called critical distance. This is, crudely speaking, the distance where the direct sound power is equal to the total reflective power. A generalization of the statistical reverberation model in which the direct sound is incorporated is developed. This model requires one additional parameter that is related to the ratio between the direct sound energy and the sound energy of all reflections. The generalized model is used to derive a novel spectral variance estimator. When the novel estimator is used for dereverberation rather than the existing estimator, and the source-microphone distance is smaller than the critical distance, the dereverberation performance is significantly increased. Single-microphone systems only exploit the temporal and spectral diversity of the received signal. Reverberation, of course, also induces spatial diversity. To additionally exploit this diversity, multiple microphones must be used, and their outputs must be combined by a suitable spatial processor such as the so-called delay and sum beamformer. It is not a priori evident whether spectral enhancement is best done before or after the spatial processor. For this reason we investigate both possibilities, as well as a merge of the spatial processor and the spectral enhancement technique. An advantage of the latter option is that the spectral variance estimator can be further improved. Our experiments show that the use of multiple microphones affords a significant improvement of the perceptual speech quality. The applicability of the theory developed in this dissertation is demonstrated using a hands-free communication system. Since hands-free systems are often used in a noisy and reverberant environment, the received microphone signal does not only contain the desired signal but also interferences such as room reverberation that is caused by the desired source, background noise, and a far-end echo signal that results from a sound that is produced by the loudspeaker. Usually an acoustic echo canceller is used to cancel the far-end echo. Additionally a post-processor is used to suppress background noise and residual echo, i.e., echo which could not be cancelled by the echo canceller. In this work a novel structure and post-processor for an acoustic echo canceller are developed. The post-processor suppresses late reverberation caused by the desired source, residual echo, and background noise. The late reverberation and late residual echo are estimated using the generalized statistical reverberation model. Experimental results convincingly demonstrate the benefits of the proposed system for suppressing late reverberation, residual echo and background noise. The proposed structure and post-processor have a low computational complexity, a highly modular structure, can be seamlessly integrated into existing hands-free communication systems, and affords a significant increase of the listening comfort and speech intelligibility

    Comparison of single channel blind dereverberation methods for speech signals

    Get PDF
    Reverberation is an effect caused by echoes from objects when an audio wave travels from an audio source to a listener. This channel effect can be modeled by a finite impulse response lter which is called a room impulse response (RIR) in case of speech recordings in a room. Reverberation especially with a long filter causes high degradation in recorded speech signals and may affect applications such as Automatic Speech Recognition (ASR), hands-free teleconferencing and many others significantly. It may even cause ASR performance to decrease even in a system trained using a database with reverberated speech. If the reverberation environment is known, the echoes can be removed using simple methods. However, in most of the cases, it is unknown and the process needs to be done blind, without knowing the reverberation environment. In the literature, this problem is called the blind dereverberation problem. Although, there are several methods proposed to solve the blind dereverberation problem, due to the difficulty caused by not knowing the signal and the filter, the echoes are hard to remove completely from speech signals. This thesis aims to compare some of these existing methods such as Laplacian based weighted prediction error (L-WPE), Gaussian weighted prediction error (G-WPE), NMF based temporal spectral modeling (NMF+N-CTF), delayed linear prediction (DLP) and proposes a new method that we call sparsity penalized weighted least squares (SPWLS). In our experiments, we obtained the best results with L-WPE followed by G-WPE methods, whereas the new SPWLS method initialized with G-WPE method obtained slightly better signal-to-noise ratio and perceptual quality values when the room impulse responses are long

    Blind dereverberation of speech from moving and stationary speakers using sequential Monte Carlo methods

    Get PDF
    Speech signals radiated in confined spaces are subject to reverberation due to reflections of surrounding walls and obstacles. Reverberation leads to severe degradation of speech intelligibility and can be prohibitive for applications where speech is digitally recorded, such as audio conferencing or hearing aids. Dereverberation of speech is therefore an important field in speech enhancement. Driven by consumer demand, blind speech dereverberation has become a popular field in the research community and has led to many interesting approaches in the literature. However, most existing methods are dictated by their underlying models and hence suffer from assumptions that constrain the approaches to specific subproblems of blind speech dereverberation. For example, many approaches limit the dereverberation to voiced speech sounds, leading to poor results for unvoiced speech. Few approaches tackle single-sensor blind speech dereverberation, and only a very limited subset allows for dereverberation of speech from moving speakers. Therefore, the aim of this dissertation is the development of a flexible and extendible framework for blind speech dereverberation accommodating different speech sound types, single- or multiple sensor as well as stationary and moving speakers. Bayesian methods benefit from – rather than being dictated by – appropriate model choices. Therefore, the problem of blind speech dereverberation is considered from a Bayesian perspective in this thesis. A generic sequential Monte Carlo approach accommodating a multitude of models for the speech production mechanism and room transfer function is consequently derived. In this approach both the anechoic source signal and reverberant channel are estimated using their optimal estimators by means of Rao-Blackwellisation of the state-space of unknown variables. The remaining model parameters are estimated using sequential importance resampling. The proposed approach is implemented for two different speech production models for stationary speakers, demonstrating substantial reduction in reverberation for both unvoiced and voiced speech sounds. Furthermore, the channel model is extended to facilitate blind dereverberation of speech from moving speakers. Due to the structure of measurement model, single- as well as multi-microphone processing is facilitated, accommodating physically constrained scenarios where only a single sensor can be used as well as allowing for the exploitation of spatial diversity in scenarios where the physical size of microphone arrays is of no concern. This dissertation is concluded with a survey of possible directions for future research, including the use of switching Markov source models, joint target tracking and enhancement, as well as an extension to subband processing for improved computational efficiency

    Speech dereverberation and speaker separation using microphone arrays in realistic environments

    Get PDF
    This thesis concentrates on comparing novel and existing dereverberation and speaker separation techniques using multiple corpora, including a new corpus collected using a microphone array. Many corpora currently used for these techniques are recorded using head-mounted microphones in anechoic chambers. This novel corpus contains recordings with noise and reverberation made in office and workshop environments. Novel algorithms present a different way of approximating the reverberation, producing results that are competitive with existing algorithms. Dereverberation is evaluated using seven correlation-based algorithms and applied to two different corpora. Three of these are novel algorithms (Hs NTF, Cauchy WPE and Cauchy MIMO WPE). Both non-learning and learning algorithms are tested, with the learning algorithms performing better. For single and multi-channel speaker separation, unsupervised non-negative matrix factorization (NMF) algorithms are compared using three cost functions combined with sparsity, convolution and direction of arrival. The results show that the choice of cost function is important for improving the separation result. Furthermore, six different supervised deep learning algorithms are applied to single channel speaker separation. Historic information improves the result. When comparing NMF to deep learning, NMF is able to converge faster to a solution and provides a better result for the corpora used in this thesis

    Channel selection and reverberation-robust automatic speech recognition

    Get PDF
    If speech is acquired by a close-talking microphone in a controlled and noise-free environment, current state-of-the-art recognition systems often show an acceptable error rate. The use of close-talking microphones, however, may be too restrictive in many applications. Alternatively, distant-talking microphones, often placed several meters far from the speaker, may be used. Such setup is less intrusive, since the speaker does not have to wear any microphone, but the Automatic Speech Recognition (ASR) performance is strongly affected by noise and reverberation. The thesis is focused on ASR applications in a room environment, where reverberation is the dominant source of distortion, and considers both single- and multi-microphone setups. If speech is recorded in parallel by several microphones arbitrarily located in the room, the degree of distortion may vary from one channel to another. The difference among the signal quality of each recording may be even more evident if those microphones have different characteristics: some are hanging on the walls, others standing on the table, or others build in the personal communication devices of the people present in the room. In a scenario like that, the ASR system may benefit strongly if the signal with the highest quality is used for recognition. To find such signal, what is commonly referred as Channel Selection (CS), several techniques have been proposed, which are discussed in detail in this thesis. In fact, CS aims to rank the signals according to their quality from the ASR perspective. To create such ranking, a measure that either estimates the intrinsic quality of a given signal, or how well it fits the acoustic models of the recognition system is needed. In this thesis we provide an overview of the CS measures presented in the literature so far, and compare them experimentally. Several new techniques are introduced, that surpass the former techniques in terms of recognition accuracy and/or computational efficiency. A combination of different CS measures is also proposed to further increase the recognition accuracy, or to reduce the computational load without any significant performance loss. Besides, we show that CS may be used together with other robust ASR techniques, and that the recognition improvements are cumulative up to some extent. An online real-time version of the channel selection method based on the variance of the speech sub-band envelopes, which was developed in this thesis, was designed and implemented in a smart room environment. When evaluated in experiments with real distant-talking microphone recordings and with moving speakers, a significant recognition performance improvement was observed. Another contribution of this thesis, that does not require multiple microphones, was developed in cooperation with the colleagues from the chair of Multimedia Communications and Signal Processing at the University of Erlangen-Nuremberg, Erlangen, Germany. It deals with the problem of feature extraction within REMOS (REverberation MOdeling for Speech recognition), which is a generic framework for robust distant-talking speech recognition. In this framework, the use of conventional methods to obtain decorrelated feature vector coefficients, like the discrete cosine transform, is constrained by the inner optimization problem of REMOS, which may become unsolvable in a reasonable time. A new feature extraction method based on frequency filtering was proposed to avoid this problem.Los actuales sistemas de reconocimiento del habla muestran a menudo una tasa de error aceptable si la voz es registrada por micr ofonos próximos a la boca del hablante, en un entorno controlado y libre de ruido. Sin embargo, el uso de estos micr ofonos puede ser demasiado restrictivo en muchas aplicaciones. Alternativamente, se pueden emplear micr ofonos distantes, los cuales a menudo se ubican a varios metros del hablante. Esta con guraci on es menos intrusiva ya que el hablante no tiene que llevar encima ning un micr ofono, pero el rendimiento del reconocimiento autom atico del habla (ASR, del ingl es Automatic Speech Recognition) en dicho caso se ve fuertemente afectado por el ruido y la reverberaci on. Esta tesis se enfoca a aplicaciones ASR en el entorno de una sala, donde la reverberaci on es la causa predominante de distorsi on y se considera tanto el caso de un solo micr ofono como el de m ultiples micr ofonos. Si el habla es grabada en paralelo por varios micr ofonos distribuidos arbitrariamente en la sala, el grado de distorsi on puede variar de un canal a otro. Las diferencias de calidad entre las señales grabadas pueden ser m as acentuadas si dichos micr ofonos muestran diferentes características y colocaciones: unos en las paredes, otros sobre la mesa, u otros integrados en los dispositivos de comunicaci on de las personas presentes en la sala. En dicho escenario el sistema ASR se puede bene ciar enormemente de la utilizaci on de la señal con mayor calidad para el reconocimiento. Para hallar dicha señal se han propuesto diversas t ecnicas, denominadas CS (del ingl es Channel Selection), las cuales se discuten detalladament en esta tesis. De hecho, la selecci on de canal busca ranquear las señales conforme a su calidad desde la perspectiva ASR. Para crear tal ranquin se necesita una medida que tanto estime la calidad intr nseca de una selal, como lo bien que esta se ajusta a los modelos ac usticos del sistema de reconocimiento. En esta tesis proporcionamos un resumen de las medidas CS hasta ahora presentadas en la literatura, compar andolas experimentalmente. Diversas nuevas t ecnicas son presentadas que superan las t ecnicas iniciales en cuanto a exactitud de reconocimiento y/o e ciencia computacional. Tambi en se propone una combinaci on de diferentes medidas CS para incrementar la exactitud de reconocimiento, o para reducir la carga computacional sin ninguna p erdida signi cativa de rendimiento. Adem as mostramos que la CS puede ser empleada junto con otras t ecnicas robustas de ASR, tales como matched condition training o la normalizaci on de la varianza y la media, y que las mejoras de reconocimiento de ambas aproximaciones son hasta cierto punto acumulativas. Una versi on online en tiempo real del m etodo de selecci on de canal basado en la varianza del speech sub-band envelopes, que fue desarrolladas en esta tesis, fue diseñada e implementada en una sala inteligente. Reportamos una mejora signi cativa en el rendimiento del reconocimiento al evaluar experimentalmente grabaciones reales de micr ofonos no pr oximos a la boca con hablantes en movimiento. La otra contribuci on de esta tesis, que no requiere m ultiples micr ofonos, fue desarrollada en colaboraci on con los colegas del departamento de Comunicaciones Multimedia y Procesamiento de Señales de la Universidad de Erlangen-Nuremberg, Erlangen, Alemania. Trata sobre el problema de extracci on de caracter sticas en REMOS (del ingl es REverberation MOdeling for Speech recognition). REMOS es un marco conceptual gen erico para el reconocimiento robusto del habla con micr ofonos lejanos. El uso de los m etodos convencionales para obtener los elementos decorrelados del vector de caracter sticas, como la transformada coseno discreta, est a limitado por el problema de optimizaci on inherente a REMOS, lo que har a que, utilizando las herramientas convencionales, se volviese un problema irresoluble en un tiempo razonable. Para resolver este problema hemos desarrollado un nuevo m etodo de extracci on de caracter sticas basado en fi ltrado frecuencialEls sistemes actuals de reconeixement de la parla mostren sovint una taxa d'error acceptable si la veu es registrada amb micr ofons pr oxims a la boca del parlant, en un entorn controlat i lliure de soroll. No obstant, l' us d'aquests micr ofons pot ser massa restrictiu en moltes aplicacions. Alternativament, es poden utilitzar micr ofons distants, els quals sovint s on ubicats a diversos metres del parlant. Aquesta con guraci o es menys intrusiva, ja que el parlant no ha de portar a sobre cap micr ofon, per o el rendiment del reconeixement autom atic de la parla (ASR, de l'angl es Automatic Speech Recognition) en aquest cas es veu fortament afectat pel soroll i la reverberaci o. Aquesta tesi s'enfoca a aplicacions ASR en un ambient de sala, on la reverberaci o es la causa predominant de distorsi o i es considera tant el cas d'un sol micr ofon com el de m ultiples micr ofons. Si la parla es gravada en paral lel per diversos micr ofons distribuï ts arbitràriament a la sala, el grau de distorsi o pot variar d'un canal a l'altre. Les difer encies en qualitat entre els senyals enregistrats poden ser m es accentuades si els micr ofons tenen diferents caracter stiques i col locacions: uns a les parets, altres sobre la taula, o b e altres integrats en els aparells de comunicaci o de les persones presents a la sala. En un escenari com aquest, el sistema ASR es pot bene ciar enormement de l'utilitzaci o del senyal de m es qualitat per al reconeixement. Per a trobar aquest senyal s'han proposat diverses t ecniques, anomenades CS (de l'angl es Channel Selection), les quals es discuteixen detalladament en aquesta tesi. De fet, la selecci o de canal busca ordenar els senyals conforme a la seva qualitat des de la perspectiva ASR. Per crear tal r anquing es necessita una mesura que estimi la qualitat intr nseca d'un senyal, o b e una que valori com de b e aquest s'ajusta als models ac ustics del sistema de reconeixement. En aquesta tesi proporcionem un resum de les mesures CS ns ara presentades en la literatura, comparant-les experimentalment. A m es, es presenten diverses noves t ecniques que superen les anteriors en termes d'exactitud de reconeixement i / o e ci encia computacional. Tamb e es proposa una combinaci o de diferents mesures CS amb l'objectiu d'incrementar l'exactitud del reconeixement, o per reduir la c arrega computacional sense cap p erdua signi cativa de rendiment. A m es mostrem que la CS pot ser utilitzada juntament amb altres t ecniques robustes d'ASR, com ara matched condition training o la normalitzaci o de la varian ca i la mitjana, i que les millores de reconeixement de les dues aproximacions s on ns a cert punt acumulatives. Una versi o online en temps real del m etode de selecci o de canal basat en la varian ca de les envolvents sub-banda de la parla, desenvolupada en aquesta tesi, va ser dissenyada i implementada en una sala intel ligent. A l'hora d'avaluar experimentalment gravacions reals de micr ofons no pr oxims a la boca amb parlants en moviment, es va observar una millora signi cativa en el rendiment del reconeixement. L'altra contribuci o d'aquesta tesi, que no requereix m ultiples micr ofons, va ser desenvolupada en col laboraci o amb els col legues del departament de Comunicacions Multimedia i Processament de Senyals de la Universitat de Erlangen-Nuremberg, Erlangen, Alemanya. Tracta sobre el problema d'extracci o de caracter stiques a REMOS (de l'angl es REverberation MOdeling for Speech recognition). REMOS es un marc conceptual gen eric per al reconeixement robust de la parla amb micr ofons llunyans. L' us dels m etodes convencionals per obtenir els elements decorrelats del vector de caracter stiques, com ara la transformada cosinus discreta, est a limitat pel problema d'optimitzaci o inherent a REMOS. Aquest faria que, utilitzant les eines convencionals, es torn es un problema irresoluble en un temps raonable. Per resoldre aquest problema hem desenvolupat un nou m etode d'extracci o de caracter ístiques basat en fi ltrat frecuencial

    Speech Recognition

    Get PDF
    Chapters in the first part of the book cover all the essential speech processing techniques for building robust, automatic speech recognition systems: the representation for speech signals and the methods for speech-features extraction, acoustic and language modeling, efficient algorithms for searching the hypothesis space, and multimodal approaches to speech recognition. The last part of the book is devoted to other speech processing applications that can use the information from automatic speech recognition for speaker identification and tracking, for prosody modeling in emotion-detection systems and in other speech processing applications that are able to operate in real-world environments, like mobile communication services and smart homes
    corecore