Predictive Control of Cascaded H-Bridge Converters under Unbalanced Power Generation

© 1982-2012 IEEE. This paper presents a predictive control strategy for grid-connected cascaded H-bridge (CHB) converters under unbalanced power generation among each converter phase. The proposed controller belongs to the finite-control-set model predictive control (FCS-MPC) family and is designed to extract unbalanced power from each CHB converter phase while providing balanced power to the grid. The key novelty of this strategy lies in the way the unbalanced power generation among the phases is explicitly considered into the optimal control problem. Power balance is achieved by enforcing the CHB converter to work with a suitable zero-sequence voltage component. The proposed predictive controller is directly formulated in the original abc-framework to account for the common-mode voltage. Simulation and experimental results are provided to verify the effectiveness of the proposed FCS-MPC strategy

Predictive Control algorithm to achieve power balance of Cascaded H-Bridge converters

© 2015 IEEE. This work proposes a Model Predictive Control (MPC) strategy for Cascaded H-Bridge (CHB) converters under unbalanced power generation among each converter phase. Therefore, the control target is to extract unbalanced power from the dc-sources while providing balanced power to the grid. The key novelty of this proposal lies in the way the unbalanced power generation issue is explicitly considered into the optimal control problem. The power balance is achieved by enforcing the CHB to work with a suitable zero voltage components. Thus, to account for the common-mode voltage, the proposed MPC is directly formulated in the original abc-framework. To verify the effectiveness of this proposal, simulation results of the proposed MPC governing a five-level CHB converter are provided

Multilevel Converters: An Enabling Technology for High-Power Applications

| Multilevel converters are considered today as the state-of-the-art power-conversion systems for high-power and power-quality demanding applications. This paper presents a tutorial on this technology, covering the operating principle and the different power circuit topologies, modulation methods, technical issues and industry applications. Special attention is given to established technology already found in industry with more in-depth and self-contained information, while recent advances and state-of-the-art contributions are addressed with useful references. This paper serves as an introduction to the subject for the not-familiarized reader, as well as an update or reference for academics and practicing engineers working in the field of industrial and power electronics.Ministerio de Ciencia y Tecnología DPI2001-3089Ministerio de Eduación y Ciencia d TEC2006-0386

Transformer-Less Cascaded Voltage Source Converter Based STATCOM

In this work, a transformer-less voltage source converter (VSC) based STATCOM is proposed with a combination of cascaded conventional three-phase voltage source inverters. This modular structure provides multilevel operation with reduced switch count and independent DC-link capacitors. The actual contribution of this paper is the transformer-less configuration of a conventional cascaded voltage source converter which provides reduced cost and volume as compared to other transformer-less converter configurations. The system provides reactive power compensation with better power quality when connected to the nonlinear power electronics load also. A simple control system is provided for balancing the Dc link capacitor voltage and reactive power compensation. The validation of the proposed model is analyzed with simulation using MATLAB/SIMULINK software and the results are obtained with different linear and nonlinear load configurations

Solid state transformer technologies and applications: a bibliographical survey

This paper presents a bibliographical survey of the work carried out to date on the solid state transformer (SST). The paper provides a list of references that cover most work related to this device and a short discussion about several aspects. The sections of the paper are respectively dedicated to summarize configurations and control strategies for each SST stage, the work carried out for optimizing the design of high-frequency transformers that could adequately work in the isolation stage of a SST, the efficiency of this device, the various modelling approaches and simulation tools used to analyze the performance of a SST (working a component of a microgrid, a distribution system or just in a standalone scenario), and the potential applications that this device is offering as a component of a power grid, a smart house, or a traction system.Peer ReviewedPostprint (published version

Modular Multilevel Cascaded Flying Capacitor STATCOM for Balanced and Unbalanced Load Compensation

Voltage and current unbalance are major problems in distribution networks, particularly with the integration of distributed generation systems. One way of mitigating these issues is by injecting negative sequence current into the distribution network using a Static Synchronous Compensator (STATCOM) which normally also regulates the voltage and power factor. The benefits of modularity and scalability offered by Modular Multilevel Cascaded Converters (MMCC) make them suitable for STATCOM application. A number of different types of MMCC may be used, classified according to the sub-module circuit topology used. Their performance features and operational ranges for unbalanced load compensation are evaluated and quantified in this research. This thesis investigates the use of both single star and single delta configured five-level Flying Capacitor (FC) converter MMCC based STATCOMs for unbalanced load compensation. A detailed study is carried out to compare this type of sub-module with several other types namely: half bridge, 3-L H-bridge and 3-L FC half bridge, and reveals the one best suited to STATCOM operation. With the choice of 5-L FC H-bridge as the sub-module for STATCOM operation, a detailed investigation is also performed to decide which pulse width modulation technique is the best. This was based on the assessment of total harmonic distortion, power loss, sub-module switch utilization and natural balancing of inner flying capacitors. Two new modulation techniques of swapped-carrier PWM (SC-PWM) along with phase disposed and phase shifted PWM (PS-PWM) are analyzed under these four performance metrics. A novel contribution of this research is the development of a new space vector modulation technique using an overlapping hexagon technique. This space vector strategy offers benefits of eliminating control complexity and improving waveform quality, unlike the case of multilevel space vector technique. The simulation and experimental results show that this method provides superior performance and is applicable for other MMCC sub-modules. Another contribution is the analysis and quantification of operating ranges of both single star and delta MMCCs in rating the cluster dc-link voltage (star) and current (delta) for unbalanced load compensation. A novel method of extending the operating capabilities of both configurations uses a third harmonic injection method. An experimental investigation validates the operating range extension compared to the pure sinusoidal zero sequence voltage and current injection. Also, the superiority of the single delta configured MMCC for unbalanced loading compensation is validated

Contributions to Modulation and Control Algorithms for Multilevel Converters

Las actuales tendencias de la red eléctrica han lanzado a la industria a la búsqueda de sistemas de generación, distribución y consumo de energía eléctrica más eficientes. Generación distribuida, reducción de componentes pasivos, líneas DC de alta tensión son, entre otras, las posibles líneas de investigación que están actualmente siendo consideradas como el futuro de la red eléctrica. Sin embargo, nada de esto sería posible si no fuera por los avances alcanzados en el campo de la electrónica de potencia. El trabajo aquí presentado comienza con una breve introducción a la electrónica de potencia, concretamente a los convertidores de potencia conectados a red, sus estrategias de control más comunes y enfoques ante redes desbalanceadas. A continuación, las contribuciones del autor sobre el control y modulación de una topología particular de convertidores, conocidos como convertidores multinivel, se presentan como el principal contenido de este trabajo. Este tipo de convertidores mejoran la eficiencia y ciertas prestaciones, en comparación con convertidores más tradicionales, a costa de una mayor complejidad en el control al incrementar la cantidad de los componentes hardware. A pesar de que existen numerosas topologías de convertidores multinivel y algunas de ellas son brevemente expuestas en este trabajo, la mayoría de las aportaciones están enfocadas para convertidores del tipo diode-clamped converter. Adicionalmente, se incluye una aportación para convertidores del tipo multinivel modular, y otra para convertidores en cascada. Se espera que el contenido de la introducción de este trabajo, junto a las contribuciones particulares para convertidores multinivel sirva de inspiración para futuros investigadores del campo

The Essential Role and the Continuous Evolution of Modulation Techniques for Voltage-Source Inverters in the Past, Present, and Future Power Electronics

The cost reduction of power-electronic devices, the increase in their reliability, efficiency, and power capability, and lower development times, together with more demanding application requirements, has driven the development of several new inverter topologies recently introduced in the industry, particularly medium-voltage converters. New more complex inverter topologies and new application fields come along with additional control challenges, such as voltage imbalances, power-quality issues, higher efficiency needs, and fault-tolerant operation, which necessarily requires the parallel development of modulation schemes. Therefore, recently, there have been significant advances in the field of modulation of dc/ac converters, which conceptually has been dominated during the last several decades almost exclusively by classic pulse-width modulation (PWM) methods. This paper aims to concentrate and discuss the latest developments on this exciting technology, to provide insight on where the state-of-the-art stands today, and analyze the trends and challenges driving its future

Analysis and Control of a Modular Multilevel Cascaded Converter-based Unified Power Flow Controller

This paper presents a novel configuration of a unified power flow controller (UPFC) comprising a modular multilevel cascaded converter (MMCC) with a full-bridge inverter. The MMCC has one end of phase-legs shunt-connected to the transmission line. The other end connects in parallel to the primary terminals of a series line transformer, and the ac output terminals of a full-bridge dc-ac inverter. The submodules in the MMCC are full-bridge flying capacitor converters. This UPFC is compared to another type of MMCC-UPFC which uses double-star configuration, and submodules are of half-bridge chopper circuits; this is referred to as the Double Star Chopper Cells UPFC (DSCC-UPFC). The comparison is in terms of footprint, cost and performance. The new topology is lighter, more efficient and cheaper than the DSCC. Its operation principle and control scheme, which combines the regulations of voltage and of power flow along the transmission line are presented. Simulation studies for this new MMCC-UPFC realizing power flow control in a dual voltage sourced power network are presented and show good performance under varying operation conditions. The paper also evaluates the power control margins of this device