A Study of Proportional Hazards Models: Its Applications in Prognostics

Prognostics and health management technology is proposed to satisfy the requirements of equipment autonomous maintenance and diagnosis, which is a new technique relying on condition-based maintenance. It mainly includes condition monitoring, fault diagnostics, life prediction, maintenance decision-making, and spare parts management. As one of the most commonly used reliability statistical modeling methods, proportional hazards model (PHM) is widely used in the field of prognostics, because it can effectively combine equipment service age and condition monitoring information to obtain more accurate condition prediction results. In the past decades, PHM-based methods have been widely employed, especially since the twenty-first century. However, after the rapid development of PHM, there is no systematic review and summary particularly focused on it. Therefore, this chapter comprehensively summarizes the research progress of PHM in prognostics

Condition-based maintenance—an extensive literature review

This paper presents an extensive literature review on the field of condition-based maintenance (CBM). The paper encompasses over 4000 contributions, analysed through bibliometric indicators and meta-analysis techniques. The review adopts Factor Analysis as a dimensionality reduction, concerning the metric of the co-citations of the papers. Four main research areas have been identified, able to delineate the research field synthetically, from theoretical foundations of CBM; (i) towards more specific implementation strategies (ii) and then specifically focusing on operational aspects related to (iii) inspection and replacement and (iv) prognosis. The data-driven bibliometric results have been combined with an interpretative research to extract both core and detailed concepts related to CBM. This combined analysis allows a critical reflection on the field and the extraction of potential future research directions

A Stochastic Approach to Measurement-Driven Damage Detection And Prognosis in Structural Health Monitoring

Damage detection and prognosis are integral to asset management of critical mechanical and civil engineering infrastructure. In practice, these two aspects are often decoupled, where the former is carried out independently using sensor data (e.g., vibrations), while the latter is undertaken based on reliability principles using life time failure data of the system or the component of interest. Only in a few studies damage detection results are extended to remaining useful life estimation, which is achieved by modeling the underlying degradation process using a surrogate measure of degradation. However, an integrated framework which undertakes damage detection, prognosis, and maintenance planning in a systematic way is lacking in the literature. Furthermore, the parameters of degradation model which are utilized for prognosis are often solely estimated using the degradation data obtained from the monitored unit, which represents the degradation of a specific unit, but ignores the general population trend. The main objectives of this thesis are three-fold: first, a mathematical framework using surrogate measure of degradation is developed to undertake the damage detection and prognosis in a single framework; next, the prior knowledge obtained from the historical failed units are integrated in model parameter estimation and residual useful life (RUL) updating of a monitored unit using a Bayesian approach; finally, the proposed degradation modeling framework is applied for maintenance planning of civil and industrial systems, specifically, for reinforced concrete beams and rolling element bearings. The initiation of a fault in these applications is often followed by a sudden change in the degradation path. The location of a change-point can be associated with a sudden loss of stiffness in the case of structural members, or fault initiation in the case of bearings. Hence, in this thesis, the task of change point location identification is thought of as being synonymous with damage or fault detection in the context of structural health monitoring. Furthermore, the change point results are used for two-phase degradation modeling, future degradation level prediction and subsequent RUL estimation. The model parameters are updated using a Bayesian approach, which systematically integrates the prior knowledge obtained from historical failure-time data with monitored data obtained from an in-situ unit. Once such a model is established, it is projected to a failure threshold, thereby allowing for RUL estimation and maintenance planning. Results from the numerical as well as actual field data shows that the proposed degradation modeling framework is good in performing these two tasks. It was also found that as more degradation data is utilized from the monitoring unit, the progressing fault is detected in a timely manner and the model parameters estimates and the end life predictions become more accurate

Prognostics Under the Conditions of Limited Failure Data Availability

[Restricted]Engineering and Physical Sciences Research Counci

Modelo de apoio à decisão para a manutenção condicionada de equipamentos produtivos

Doctoral Thesis for PhD degree in Industrial and Systems EngineeringIntroduction: This thesis describes a methodology to combine Bayesian control chart and CBM (Condition-Based Maintenance) for developing a new integrated model. In maintenance management, it is a challenging task for decision-maker to conduct an appropriate and accurate decision. Proper and well-performed CBM models are beneficial for maintenance decision making. The integration of Bayesian control chart and CBM is considered as an intelligent model and a suitable strategy for forecasting items failures as well as allow providing an effectiveness maintenance cost. CBM models provides lower inventory costs for spare parts, reduces unplanned outage, and minimize the risk of catastrophic failure, avoiding high penalties associated with losses of production or delays, increasing availability. However, CBM models need new aspects and the integration of new type of information in maintenance modeling that can improve the results. Objective: The thesis aims to develop a new methodology based on Bayesian control chart for predicting failures of item incorporating simultaneously two types of data: key quality control measurement and equipment condition parameters. In other words, the project research questions are directed to give the lower maintenance costs for real process control. Method: The mathematical approach carried out in this study for developing an optimal Condition Based Maintenance policy included the Weibull analysis for verifying the Markov property, Delay time concept used for deterioration modeling and PSO and Monte Carlo simulation. These models are used for finding the upper control limit and the interval monitoring that minimizes the (maintenance) cost function. Result: The main contribution of this thesis is that the proposed model performs better than previous models in which the hypothesis of using simultaneously data about condition equipment parameters and quality control measurements improve the effectiveness of integrated model Bayesian control chart for Condition Based Maintenance.Introdução: Esta tese descreve uma metodologia para combinar Bayesian control chart e CBM (Condition- Based Maintenance) para desenvolver um novo modelo integrado. Na gestão da manutenção, é importante que o decisor possa tomar decisões apropriadas e corretas. Modelos CBM bem concebidos serão muito benéficos nas tomadas de decisão sobre manutenção. A integração dos gráficos de controlo Bayesian e CBM é considerada um modelo inteligente e uma estratégica adequada para prever as falhas de componentes bem como produzir um controlo de custos de manutenção. Os modelos CBM conseguem definir custos de inventário mais baixos para as partes de substituição, reduzem interrupções não planeadas e minimizam o risco de falhas catastróficas, evitando elevadas penalizações associadas a perdas de produção ou atrasos, aumentando a disponibilidade. Contudo, os modelos CBM precisam de alterações e a integração de novos tipos de informação na modelação de manutenção que permitam melhorar os resultados.Objetivos: Esta tese pretende desenvolver uma nova metodologia baseada Bayesian control chart para prever as falhas de partes, incorporando dois tipos de dados: medições-chave de controlo de qualidade e parâmetros de condição do equipamento. Por outras palavras, as questões de investigação são direcionadas para diminuir custos de manutenção no processo de controlo.Métodos: Os modelos matemáticos implementados neste estudo para desenvolver uma política ótima de CBM incluíram a análise de Weibull para verificação da propriedade de Markov, conceito de atraso de tempo para a modelação da deterioração, PSO e simulação de Monte Carlo. Estes modelos são usados para encontrar o limite superior de controlo e o intervalo de monotorização para minimizar a função de custos de manutenção.Resultados: A principal contribuição desta tese é que o modelo proposto melhora os resultados dos modelos anteriores, baseando-se na hipótese de que, usando simultaneamente dados dos parâmetros dos equipamentos e medições de controlo de qualidade. Assim obtém-se uma melhoria a eficácia do modelo integrado de Bayesian control chart para a manutenção condicionada

Contribution to reliable control of dynamic systems

This thesis presents sorne contributions to the field of Health-Aware Control (HAC) of dynamic systems. In the first part of this thesis, a review of the concepts and methodologies related to reliability versus degradation and fault tolerant control versus health-aware control is presented. Firstly, in an attempt to unify concepts, an overview of HAC, degradation, and reliability modeling including some of the most relevant theoretical and applied contributions is given. Moreover, reliability modeling is formalized and exemplified using the structure function, Bayesian networks (BNs) and Dynamic Bayesian networks (DBNs) as modeling tools in reliability analysis. In addition, some Reliability lmportance Measures (RIMs) are presented. In particular, this thesis develops BNs models for overall system reliability analysis through the use of Bayesian inference techniques. Bayesian networks are powerful tools in system reliability assessment due to their flexibility in modeling the reliability structure of complex systems. For the HAC scheme implementation, this thesis presents and discusses the integration of actuators health information by means of RIMs and degradation in Model Predictive Control (MPC) and Linear Quadratic Regulator algorithms. In the proposed strategies, the cost function parameters are tuned using RIMs. The methodology is able to avoid the occurrence of catastrophic and incipient faults by monitoring the overall system reliability. The proposed HAC strategies are applied to a Drinking Water Network (DWN) and a multirotor UAV system. Moreover, a third approach, which uses MPC and restricts the degradation of the system components is applied to a twin rotor system. Finally, this thesis presents and discusses two reliability interpretations. These interpretations, namely instantaneous and expected, differ in the manner how reliability is evaluated and how its evolution along time is considered. This comparison is made within a HAC framework and studies the system reliability under both approaches.Aquesta tesi presenta algunes contribucions al camp del control basat en la salut dels components "Health-Aware Control" (HAC) de sistemes dinàmics. A la primera part d'aquesta tesi, es presenta una revisió dels conceptes i metodologies relacionats amb la fiabilitat versus degradació, el control tolerant a fallades versus el HAC. En primer lloc, i per unificar els conceptes, s'introdueixen els conceptes de degradació i fiabilitat, models de fiabilitat i de HAC incloent algunes de les contribucions teòriques i aplicades més rellevants. La tesi, a més, el modelatge de la fiabilitat es formalitza i exemplifica utilitzant la funció d'estructura del sistema, xarxes bayesianes (BN) i xarxes bayesianes dinamiques (DBN) com a eines de modelat i anàlisi de la fiabilitat com també presenta algunes mesures d'importància de la fiabilitat (RIMs). En particular, aquesta tesi desenvolupa models de BNs per a l'anàlisi de la fiabilitat del sistema a través de l'ús de tècniques d'inferència bayesiana. Les xarxes bayesianes són eines poderoses en l'avaluació de la fiabilitat del sistema gràcies a la seva flexibilitat en el modelat de la fiabilitat de sistemes complexos. Per a la implementació de l?esquema de HAC, aquesta tesi presenta i discuteix la integració de la informació sobre la salut i degradació dels actuadors mitjançant les RIMs en algoritmes de control predictiu basat en models (MPC) i control lineal quadràtic (LQR). En les estratègies proposades, els paràmetres de la funció de cost s'ajusten utilitzant els RIMs. Aquestes tècniques de control fiable permetran millorar la disponibilitat i la seguretat dels sistemes evitant l'aparició de fallades a través de la incorporació d'aquesta informació de la salut dels components en l'algoritme de control. Les estratègies de HAC proposades s'apliquen a una xarxa d'aigua potable (DWN) i a un sistema UAV multirrotor. A més, un tercer enfocament fent servir la degradació dels actuadors com a restricció dins l'algoritme de control MPC s'aplica a un sistema aeri a dos graus de llibertat (TRMS). Finalment, aquesta tesi també presenta i discuteix dues interpretacions de la fiabilitat. Aquestes interpretacions, nomenades instantània i esperada, difereixen en la forma en què s'avalua la fiabilitat i com es considera la seva evolució al llarg del temps. Aquesta comparació es realitza en el marc del control HAC i estudia la fiabilitat del sistema en tots dos enfocaments.Esta tesis presenta algunas contribuciones en el campo del control basado en la salud de los componentes “Health-Aware Control” (HAC) de sistemas dinámicos. En la primera parte de esta tesis, se presenta una revisión de los conceptos y metodologíasrelacionados con la fiabilidad versus degradación, el control tolerante a fallos versus el HAC. En primer lugar, y para unificar los conceptos, se introducen los conceptos de degradación y fiabilidad, modelos de fiabilidad y de HAC incluyendo algunas de las contribuciones teóricas y aplicadas más relevantes. La tesis, demás formaliza y ejemplifica el modelado de fiabilidad utilizando la función de estructura del sistema, redes bayesianas (BN) y redes bayesianas diná-micas (DBN) como herramientas de modelado y análisis de fiabilidad como también presenta algunas medidas de importancia de la fiabilidad (RIMs). En particular, esta tesis desarrolla modelos de BNs para el análisis de la fiabilidad del sistema a través del uso de técnicas de inferencia bayesiana. Las redes bayesianas son herramientas poderosas en la evaluación de la fiabilidad del sistema gracias a su flexibilidad en el modelado de la fiabilidad de sistemas complejos. Para la implementación del esquema de HAC, esta tesis presenta y discute la integración de la información sobre la salud y degradación de los actuadores mediante las RIMs en algoritmos de control predictivo basado en modelos (MPC) y del control cuadrático lineal (LQR). En las estrategias propuestas, los parámetros de la función de coste se ajustan utilizando las RIMs. Estas técnicas de control fiable permitirán mejorar la disponibilidad y la seguridad de los sistemas evitando la aparición de fallos a través de la incorporación de la información de la salud de los componentes en el algoritmo de control. Las estrategias de HAC propuestas se aplican a una red de agua potable (DWN) y a un sistema UAV multirotor. Además, un tercer enfoque que usa la degradación de los actuadores como restricción en el algoritmo de control MPC se aplica a un sistema aéreo con dos grados de libertad (TRMS). Finalmente, esta tesis también presenta y discute dos interpretaciones de la fiabilidad. Estas interpretaciones, llamadas instantánea y esperada, difieren en la forma en que se evalúa la fiabilidad y cómo se considera su evolución a lo largo del tiempo. Esta comparación se realiza en el marco del control HAC y estudia la fiabilidad del sistema en ambos enfoques

Contribution to reliable control of dynamic systems

Aplicat embargament des de la data de defensa fins al maig 2020This thesis presents sorne contributions to the field of Health-Aware Control (HAC) of dynamic systems. In the first part of this thesis, a review of the concepts and methodologies related to reliability versus degradation and fault tolerant control versus health-aware control is presented. Firstly, in an attempt to unify concepts, an overview of HAC, degradation, and reliability modeling including some of the most relevant theoretical and applied contributions is given. Moreover, reliability modeling is formalized and exemplified using the structure function, Bayesian networks (BNs) and Dynamic Bayesian networks (DBNs) as modeling tools in reliability analysis. In addition, some Reliability lmportance Measures (RIMs) are presented. In particular, this thesis develops BNs models for overall system reliability analysis through the use of Bayesian inference techniques. Bayesian networks are powerful tools in system reliability assessment due to their flexibility in modeling the reliability structure of complex systems. For the HAC scheme implementation, this thesis presents and discusses the integration of actuators health information by means of RIMs and degradation in Model Predictive Control (MPC) and Linear Quadratic Regulator algorithms. In the proposed strategies, the cost function parameters are tuned using RIMs. The methodology is able to avoid the occurrence of catastrophic and incipient faults by monitoring the overall system reliability. The proposed HAC strategies are applied to a Drinking Water Network (DWN) and a multirotor UAV system. Moreover, a third approach, which uses MPC and restricts the degradation of the system components is applied to a twin rotor system. Finally, this thesis presents and discusses two reliability interpretations. These interpretations, namely instantaneous and expected, differ in the manner how reliability is evaluated and how its evolution along time is considered. This comparison is made within a HAC framework and studies the system reliability under both approaches.Aquesta tesi presenta algunes contribucions al camp del control basat en la salut dels components "Health-Aware Control" (HAC) de sistemes dinàmics. A la primera part d'aquesta tesi, es presenta una revisió dels conceptes i metodologies relacionats amb la fiabilitat versus degradació, el control tolerant a fallades versus el HAC. En primer lloc, i per unificar els conceptes, s'introdueixen els conceptes de degradació i fiabilitat, models de fiabilitat i de HAC incloent algunes de les contribucions teòriques i aplicades més rellevants. La tesi, a més, el modelatge de la fiabilitat es formalitza i exemplifica utilitzant la funció d'estructura del sistema, xarxes bayesianes (BN) i xarxes bayesianes dinamiques (DBN) com a eines de modelat i anàlisi de la fiabilitat com també presenta algunes mesures d'importància de la fiabilitat (RIMs). En particular, aquesta tesi desenvolupa models de BNs per a l'anàlisi de la fiabilitat del sistema a través de l'ús de tècniques d'inferència bayesiana. Les xarxes bayesianes són eines poderoses en l'avaluació de la fiabilitat del sistema gràcies a la seva flexibilitat en el modelat de la fiabilitat de sistemes complexos. Per a la implementació de l?esquema de HAC, aquesta tesi presenta i discuteix la integració de la informació sobre la salut i degradació dels actuadors mitjançant les RIMs en algoritmes de control predictiu basat en models (MPC) i control lineal quadràtic (LQR). En les estratègies proposades, els paràmetres de la funció de cost s'ajusten utilitzant els RIMs. Aquestes tècniques de control fiable permetran millorar la disponibilitat i la seguretat dels sistemes evitant l'aparició de fallades a través de la incorporació d'aquesta informació de la salut dels components en l'algoritme de control. Les estratègies de HAC proposades s'apliquen a una xarxa d'aigua potable (DWN) i a un sistema UAV multirrotor. A més, un tercer enfocament fent servir la degradació dels actuadors com a restricció dins l'algoritme de control MPC s'aplica a un sistema aeri a dos graus de llibertat (TRMS). Finalment, aquesta tesi també presenta i discuteix dues interpretacions de la fiabilitat. Aquestes interpretacions, nomenades instantània i esperada, difereixen en la forma en què s'avalua la fiabilitat i com es considera la seva evolució al llarg del temps. Aquesta comparació es realitza en el marc del control HAC i estudia la fiabilitat del sistema en tots dos enfocaments.Esta tesis presenta algunas contribuciones en el campo del control basado en la salud de los componentes “Health-Aware Control” (HAC) de sistemas dinámicos. En la primera parte de esta tesis, se presenta una revisión de los conceptos y metodologíasrelacionados con la fiabilidad versus degradación, el control tolerante a fallos versus el HAC. En primer lugar, y para unificar los conceptos, se introducen los conceptos de degradación y fiabilidad, modelos de fiabilidad y de HAC incluyendo algunas de las contribuciones teóricas y aplicadas más relevantes. La tesis, demás formaliza y ejemplifica el modelado de fiabilidad utilizando la función de estructura del sistema, redes bayesianas (BN) y redes bayesianas diná-micas (DBN) como herramientas de modelado y análisis de fiabilidad como también presenta algunas medidas de importancia de la fiabilidad (RIMs). En particular, esta tesis desarrolla modelos de BNs para el análisis de la fiabilidad del sistema a través del uso de técnicas de inferencia bayesiana. Las redes bayesianas son herramientas poderosas en la evaluación de la fiabilidad del sistema gracias a su flexibilidad en el modelado de la fiabilidad de sistemas complejos. Para la implementación del esquema de HAC, esta tesis presenta y discute la integración de la información sobre la salud y degradación de los actuadores mediante las RIMs en algoritmos de control predictivo basado en modelos (MPC) y del control cuadrático lineal (LQR). En las estrategias propuestas, los parámetros de la función de coste se ajustan utilizando las RIMs. Estas técnicas de control fiable permitirán mejorar la disponibilidad y la seguridad de los sistemas evitando la aparición de fallos a través de la incorporación de la información de la salud de los componentes en el algoritmo de control. Las estrategias de HAC propuestas se aplican a una red de agua potable (DWN) y a un sistema UAV multirotor. Además, un tercer enfoque que usa la degradación de los actuadores como restricción en el algoritmo de control MPC se aplica a un sistema aéreo con dos grados de libertad (TRMS). Finalmente, esta tesis también presenta y discute dos interpretaciones de la fiabilidad. Estas interpretaciones, llamadas instantánea y esperada, difieren en la forma en que se evalúa la fiabilidad y cómo se considera su evolución a lo largo del tiempo. Esta comparación se realiza en el marco del control HAC y estudia la fiabilidad del sistema en ambos enfoques.Postprint (published version