18,259 research outputs found
Sensing Cell-Culture Assays with Low-Cost Circuitry
An alternative approach for cell-culture end-point protocols is proposed herein. This new technique is suitable for real-time remote sensing. It is based on Electrical Cell-substrate Impedance Spectroscopy (ECIS) and employs the Oscillation-Based Test (OBT) method. Simple and straightforward circuit blocks form the basis of the proposed measurement system. Oscillation parameters – frequency and amplitude – constitute the outcome, directly correlated with the culture status. A user can remotely track the evolution of cell cultures in real time over the complete experiment through a web tool continuously displaying the acquired data. Experiments carried out with commercial electrodes and a well-established cell line (AA8) are described, obtaining the cell number in real time from growth assays. The electrodes have been electrically characterized along the design flow in order to predict the system performance and the sensitivity curves. Curves for 1-week cell growth are reported. The obtained experimental results validate the proposed OBT for cell-culture characterization. Furthermore, the proposed electrode model provides a good approximation for the cell number and the time evolution of the studied cultures.España, Feder TEC2013-46242-C3-1-
Design criteria for flight evaluation. Monograph 4 - Control system evaluation
Methods and analyses for flight evaluation of control systems for multistage launch vehicle
Prospect for Charge Current Neutrino Interactions Measurements at the CERN-PS
Tensions in several phenomenological models grew with experimental results on
neutrino/antineutrino oscillations at Short-Baseline (SBL) and with the recent,
carefully recomputed, antineutrino fluxes from nuclear reactors. At a
refurbished SBL CERN-PS facility an experiment aimed to address the open issues
has been proposed [1], based on the technology of imaging in ultra-pure
cryogenic Liquid Argon (LAr). Motivated by this scenario a detailed study of
the physics case was performed. We tackled specific physics models and we
optimized the neutrino beam through a full simulation. Experimental aspects not
fully covered by the LAr detection, i.e. the measurements of the lepton charge
on event-by-event basis and their energy over a wide range, were also
investigated. Indeed the muon leptons from Charged Current (CC) (anti-)neutrino
interactions play an important role in disentangling different phenomenological
scenarios provided their charge state is determined. Also, the study of muon
appearance/disappearance can benefit of the large statistics of CC muon events
from the primary neutrino beam. Results of our study are reported in detail in
this proposal. We aim to design, construct and install two Spectrometers at
"NEAR" and "FAR" sites of the SBL CERN-PS, compatible with the already proposed
LAr detectors. Profiting of the large mass of the two Spectrometers their
stand-alone performances have also been exploited.Comment: 70 pages, 38 figures. Proposal submitted to SPS-C, CER
A Proposal for a Three Detector Short-Baseline Neutrino Oscillation Program in the Fermilab Booster Neutrino Beam
A Short-Baseline Neutrino (SBN) physics program of three LAr-TPC detectors
located along the Booster Neutrino Beam (BNB) at Fermilab is presented. This
new SBN Program will deliver a rich and compelling physics opportunity,
including the ability to resolve a class of experimental anomalies in neutrino
physics and to perform the most sensitive search to date for sterile neutrinos
at the eV mass-scale through both appearance and disappearance oscillation
channels. Using data sets of 6.6e20 protons on target (P.O.T.) in the LAr1-ND
and ICARUS T600 detectors plus 13.2e20 P.O.T. in the MicroBooNE detector, we
estimate that a search for muon neutrino to electron neutrino appearance can be
performed with ~5 sigma sensitivity for the LSND allowed (99% C.L.) parameter
region. In this proposal for the SBN Program, we describe the physics analysis,
the conceptual design of the LAr1-ND detector, the design and refurbishment of
the T600 detector, the necessary infrastructure required to execute the
program, and a possible reconfiguration of the BNB target and horn system to
improve its performance for oscillation searches.Comment: 209 pages, 129 figure
MIMO First and Second Order Discrete Sliding Mode Controls of Uncertain Linear Systems under Implementation Imprecisions
The performance of a conventional model-based controller significantly
depends on the accuracy of the modeled dynamics. The model of a plant's
dynamics is subjected to errors in estimating the numerical values of the
physical parameters, and variations over operating environment conditions and
time. These errors and variations in the parameters of a model are the major
sources of uncertainty within the controller structure. Digital implementation
of controller software on an actual electronic control unit (ECU) introduces
another layer of uncertainty at the controller inputs/outputs. The
implementation uncertainties are mostly due to data sampling and quantization
via the analog-to-digital conversion (ADC) unit. The failure to address the
model and ADC uncertainties during the early stages of a controller design
cycle results in a costly and time consuming verification and validation (V&V)
process. In this paper, new formulations of the first and second order discrete
sliding mode controllers (DSMC) are presented for a general class of uncertain
linear systems. The knowledge of the ADC imprecisions is incorporated into the
proposed DSMCs via an online ADC uncertainty prediction mechanism to improve
the controller robustness characteristics. Moreover, the DSMCs are equipped
with adaptation laws to remove two different types of modeling uncertainties
(multiplicative and additive) from the parameters of the linear system model.
The proposed adaptive DSMCs are evaluated on a DC motor speed control problem
in real-time using a processor-in-the-loop (PIL) setup with an actual ECU. The
results show that the proposed SISO and MIMO second order DSMCs improve the
conventional SISO first order DSMC tracking performance by 69% and 84%,
respectively. Moreover, the proposed adaptation mechanism is able to remove the
uncertainties in the model by up to 90%.Comment: 10 pages, 11 figures, ASME 2017 Dynamic Systems and Control
Conferenc
Performances of conformal and planar arrays
Static and dynamic deformations can have a severe impact on the performance of conformal antennas on aircrafts and other vehicles. Therefore it is essential to study the different deformation and vibration mechanisms and their influence on the antenna's radiation pattern. This presentation gives an overview of different approaches concerning electromagnetic modelling of array antennas and investigations on antenna deformations presented in the scope of TG20
- …