Towards synthesis for nitrogen fertilisation using a decision support system

Nitrogen (N) fertilisation in crops can be made more efficient by moving from uniform application to meeting variable crop requirements within fields. Within field variable rate N fertilisation of winter wheat (Triticum aestivum L.) is practically feasible using information from web-based decision support systems (DSS). Data from different source platforms, such as satellite, unmanned aerial vehicle (UAV) or weather stations can be used for fertilisation planning. System output offers information that can be used  to instruct variable rate fertilizer spreaders to increase or decrease fertilizer application rate on-the-go. In Sweden, satellite-based variable rate N fertilisation was available for winter wheat via a DSS, however, the existing module could be improved in different ways. In this thesis work, a new N-uptake model was estimated and opportunities using UAV-based modelling of grain quality were tested. Transferability of UAV-based models to a satellite data scale improved understanding of the complexity of data transfer from UAV-scale to a satellite scale for use in a DSS. Furthermore, it was possible to model crop phenology from historical data, which can improve accuracy of current implemented models, by taking timing of field operations in to account

Predicting malting barley protein concentration

The preferred grain protein concentration (CP) of malting barley is 10.5-11.0%, but 9.5-11.5% is acceptable. It is a challenge for farmers to achieve this target with crops grown in heterogeneous fields and exposed to fluctuating weather conditions. There are also economic and environmental reasons to balance the supply of nutrients to plant requirements. This forms the basis for precision agriculture, where barley has received limited attention. The key factor for precision agriculture in malting barley is the ability to predict CP from early observations of the crop so as to control a second fertiliser application. This thesis investigates the possibility of predicting malting barley grain CP at an early stage of development and of using a second fertilisation application during growth for total nitrogen (N) adjustment. Three experiments were conducted. The first consisted of eleven field trials (1992-1994) and was used to compare broadcasting/harrowing and combi-drilling for applying full-rate fertiliser at sowing using two types of fertilisers; pure N and one also containing phosphorus (NP). The second experiment consisted of sixteen fertiliser field trials (2001-2003) and was used to examine the possibility of postponing the decision on total N. The third consisted of three evenly fertilised fields (2002-2004). In experiments 2 and 3, canopy reflectance was measured at developmental stages BBCH 32, 45 and 69. Soil macronutrients, organic matter and mechanical composition were analysed in all ex-periments. Malting barley yield was higher when fertiliser was combi-drilled into the soil and when NP fertiliser was used. Grain CP was predicted in the field (R2adj = 0.73) from soil electrical conductivity (SECa), the canopy reflection-based vegetation index (VI) TCARI/OSAVI estimated at BBCH 32 and the sum of daily maximum temperatures during anthesis and grain filling (STS). In the fertilisation trials, CP was predicted (R2adj = 0.83) by sowing day number and the VI TCARI evaluated together with solar angle at measurement. Grain yield was independent, and grain CP almost independent, of whether all fertiliser was applied at sowing or divided between sowing and BBCH 32

Contribution of Remote Sensing on Crop Models: A Review

Crop growth models simulate the relationship between plants and the environment to predict the expected yield for applications such as crop management and agronomic decision making, as well as to study the potential impacts of climate change on food security. A major limitation of crop growth models is the lack of spatial information on the actual conditions of each field or region. Remote sensing can provide the missing spatial information required by crop models for improved yield prediction. This paper reviews the most recent information about remote sensing data and their contribution to crop growth models. It reviews the main types, applications, limitations and advantages of remote sensing data and crop models. It examines the main methods by which remote sensing data and crop growth models can be combined. As the spatial resolution of most remote sensing data varies from sub-meter to 1 km, the issue of selecting the appropriate scale is examined in conjunction with their temporal resolution. The expected future trends are discussed, considering the new and planned remote sensing platforms, emergent applications of crop models and their expected improvement to incorporate automatically the increasingly available remotely sensed products

Hyperspectral Modeling of Relative Water Content and Nitrogen Content in Sorghum and Maize

Sorghum and maize are two of the most important cereal grains worldwide. They are important industrially, and also serve as staple crops for millions of people across the world. With climate change, increasing frequencies of droughts, and crops being planted on more marginal land, it is important to breed sorghum and maize cultivars that are tolerant to drought and low fertility soils. However, one of the largest constraints to the breeding process is the cycle time between cultivar development and release. Early evaluation of cultivars with increased the ability to maintain water status under drought and increases nitrogen contents under nitrogen stress could be the key to decreasing breeding cycle time. New tools for non-destructive, high throughput phenotyping are needed to evaluate new cultivars. These new tools can also be used for monitoring and management of crops to improve productivity. Hyperspectral imaging holds promise as one tool to improve the speed and accuracy of predicting numerous plant traits including abiotic stress tolerance characteristics. In this thesis, hyperspectral imaging projects were designed to develop and test prediction models for relative water content (RWC) and nitrogen (N) content of sorghum and maize. The first study utilized three different genotypes of sorghum in an automated hyperspectral imaging system in greenhouses at Purdue University. From this study, models were developed for relative water content and nitrogen content using the data from all three genotypes collectively as well as the data from each genotype individually. Models developed using the spectral and morphological features obtained from the hyperspectral images are predictive of both relative water content and nitrogen content. The coefficients of determination (R2) for all graphs comparing the predicted relative water content to the reference relative water content of sorghum averaged 0.90 while the same graphs for maize averaged 0.64. The coefficients of determination for all graphs comparing the predicted nitrogen content to the reference nitrogen content of sorghum averaged 0.85 while the same graphs for maize averaged 0.61. Models built only with the spectral features for sorghum were also predictive of both relative water content and nitrogen content. The coefficients of determination for all graphs comparing the predicted relative water content to the reference relative water content of sorghum averaged 0.91 while the same graphs for nitrogen content in sorghum averaged 0.85. The nitrogen content models developed using the data from the Tx7000 genotype are highly predictive of both Tx7000 and B35 but not highly predictive of Tx623. However, models developed using the data from Tx623 are highly predictive of all three genotypes. Another important finding from this study was that the water and nitrogen signals overlap and the most predictive models are developed from data where water and nitrogen vary continuously. Models to predict one factor that do not account for variation in the other factor are not very accurate. The second experiment utilized hyperspectral imaging to characterize RWC and N content of maize. Models for RWC and N content were developed using spectral and morphological features. The models developed for maize were not as predictive as the models for sorghum but they were still predictive of RWC and N content for the models developed using all six genotypes and the models developed using the data from the individual genotypes. Models built using the four half-sibling genotypes were not more predictive than the models based on all six genotypes. The final portion of this thesis explored predictions across species using both the sorghum and maize data. We found that models developed using only sorghum were not predictive of the maize reference measurements. However, when the sorghum and maize data were combined and used to generate models, both the RWC model and the N content model were highly predictive for both reference measurements

Developing affordable high-throughput plant phenotyping methods for breeding of cereals and tuber crops

High-throughput plant phenotyping (HTPP) is a fast, accurate, and non-destructive process for evaluating plants' health and environmental adaptability. HTPP accelerates the identification of agronomic traits of interest, eliminates subjectivism (which is innate to humans), and facilitates the development of adapted genotypes. Current HTPP methods often rely on imaging sensors and computer vision both in the field and under controlled (indoor) conditions. However, their use is limited by the costs and complexity of the necessary instrumentation, data analysis tools, and software. This issue could be overcome by developing more cost-efficient and user-friendly methods that let breeders, farmers, and stakeholders access the benefits of HTPP. To assist such efforts, this thesis presents an ensemble of dedicated affordable phenotyping methods using RGB imaging for a range of key applications under controlled conditions.  The affordable Phenocave imaging system for use in controlled conditions was developed to facilitate studies on the effects of abiotic stresses by gathering data on important plant characteristics related to growth, yield, and adaptation to growing conditions and cultivation systems. Phenocave supports imaging sensors including visible (RGB), spectroscopic (multispectral and hyperspectral), and thermal imaging. Additionally, a pipeline for RGB image analysis was implemented as a plugin for the free and easy-to-use software ImageJ. This plugin has since proven to be an accurate alternative to conventional measurements that produces highly reproducible results. A subsequent study was conducted to evaluate the effects of heat and drought stress on plant growth and grain nutrient composition in wheat, an important staple cereal in Sweden. The effects of stress on plant growth were evaluated using image analysis, while stress-induced changes in the abundance of key plant compounds were evaluated by analyzing the nutrient composition of grains via chromatography. This led to the discovery of genotypes whose harvest quality remains stable under heat and drought stress. The next objective was to evaluate biotic stress; for this case, the effect of the fungal disease Fusarium head blight (FHB) that affects grain development in wheat was investigated. For this purpose, seed phenotyping parameters were used to determine the components and settings of a statistical model, which predicts the occurrence of FHB. The results reveal that grain morphology evaluations, such as length and width, were found to be significantly affected by the disease. Another study was carried out to estimate the disease severity of the common scab (CS) in potatoes, a widely popular food source. CS occurs on the tubers and reduces their visual appeal, significantly affecting their market value. Tubers were analyzed by a deep learning-based method to estimate disease lesion areas caused by CS. Results showed a high correlation between the predictions and expert visual scorings of the disease and proved to be a potential tool for the selection of genotypes that fulfill the market standards and resistance to CS. Both case studies highlight the role of imaging in plant health monitoring and its integration into the larger picture of plant health management.  The methods presented in this work are a starting point for bridging the gap between costs and accessibility to imaging technology. These are affordable and user-friendly resources for generating pivotal knowledge on plant development and genotype selection. In the future, image acquisition of all the methods can be integrated into the Phenocave system, potentially allowing for a more automated and efficient plant health monitoring process, leading to the identification of tolerant genotypes to biotic and abiotic stresses

High-throughput field phenotyping in cereals and implications in plant ecophysiology

[eng] Global climate change effects on agroecosystems together with increasing world population is already threatening food security and endangering ecosystem stability. Meet global food demand with crops production under climate change scenario is the core challenge in plant research nowadays. Thus, there is an urgent need to better understand the underpinning mechanisms of plant acclimation to stress conditions contributing to obtain resilient crops. Also, it is essential to develop new methods in plant research that permit to better characterize non-destructively plant traits of interest. In this sense, the advance in plant phenotyping research by high throughput systems is key to overcome these challenges, while its verification in the field may clear doubts on its feasibility. To this aim, this thesis focused on wheat and secondarily on maize as study species as they make up the major staple crops worldwide. A large panoply of phenotyping methods was employed in these works, ranging from RGB and hyperspectral sensing to metabolomic characterization, besides of other more conventional traits. All research was performed with trials grown in the field and diverse stressor conditions representative of major constrains for plant growth and production were studied: water stress, nitrogen deficiency and disease stress. Our results demonstrated the great potential of leave-to-canopy color traits captured by RGB sensors for in-field phenotyping, as they were accurate and robust indicators of grain yield in wheat and maize under disease and nitrogen deficiency conditions and of leaf nitrogen concentration in maize. On the other hand, the characterization of the metabolome of wheat tissues contributed to elucidate the metabolic mechanisms triggered by water stress and their relationship with high yielding performance, providing some potential biomarkers for higher yields and stress adaptation. Spectroscopic studies in wheat highlighted that leaf dorsoventrality may affect more than water stress on the reflected spectrum and consequently the performance of the multispectral/hyperspectral approaches to assess yield or any other relevant phenotypic trait. Anatomy, pigments and water changes were responsible of reflectance differences and the existence of leaf-side-specific responses were discussed. Finally, the use of spectroscopy for the estimation of the metabolite profiles of wheat organs showed promising for many metabolites which could pave the way for a new generation phenotyping. We concluded that future phenotyping may benefit from these findings in both the low-cost and straightforward methods and the more complex and frontier technologies.[cat] Els efectes del canvi climàtic sobre els agro-ecosistemes i l’increment de la població mundial posa en risc la seguretat alimentària i l’estabilitat dels ecosistemes. Actualment, satisfer les demandes de producció d’aliments sota l’escenari del canvi climàtic és el repte central a la Biologia Vegetal. Per això, és indispensable entendre els mecanismes subjacents de l’aclimatació a l’estrès que permeten obtenir cultius resilients. També és precís desenvolupar nou mètodes de recerca que permetin caracteritzar de manera no destructiva els trets d’interès. L’avenç del fenotipat vegetal amb sistemes d’alt rendiment és clau per abordar aquests reptes. La present tesi s’enfoca en el blat i secundàriament en el panís com a espècies d’estudi ja que constitueixen els cultius bàsics arreu del món. Un ampli ventall de mètodes de fenotipat s’han utilitzat, des sensors RGB a híper-espectrals fins a la caracterització metabolòmica. La recerca s’ha dut a terme en assajos de camp i s’han avaluat diversos tipus d’estrès representatius de les majors limitacions pel creixement i producció vegetal: estrès hídric i biòtic i deficiència de nitrogen. Els resultats demostraren el gran potencial dels trets del color RGB (des de la planta a la capçada) pel fenotipat de camp, ja que foren indicadors precisos del rendiment a blat i panís sota condicions de malaltia i deficiència de nitrogen i de la concentració de nitrogen foliar a panís. La caracterització metabolòmica de teixits de blat contribuí a esbrinar els processos metabòlics endegats per l’estrès hídric i la seva relació amb comportament genotípic, proporcionant bio-marcadors potencials per rendiments més alts i l’adaptació a l’estrès. Estudis espectroscòpics en blat van demostrar que la dorsoventralitat pot afectar més que l’estrès hídric sobre l’espectre de reflectància i consegüentment sobre el comportament de les aproximacions multi/híper-espectrals per avaluar el rendiment i d’altres trets fenotípics com anatòmics i contingut de pigments. Finalment, l’ús de l’espectroscòpia per l’estimació del contingut metabòlic als teixits de blat resulta prometedor per molts metabòlits, la qual cosa obre les portes per a un fenotipat de nova generació. El fenotipat pot beneficiar-se d’aquestes troballes, tant en els mètodes de baix cost com de les tecnologies més sofisticades i d’avantguarda

Remote Sensing for Precision Nitrogen Management

This book focuses on the fundamental and applied research of the non-destructive estimation and diagnosis of crop leaf and plant nitrogen status and in-season nitrogen management strategies based on leaf sensors, proximal canopy sensors, unmanned aerial vehicle remote sensing, manned aerial remote sensing and satellite remote sensing technologies. Statistical and machine learning methods are used to predict plant-nitrogen-related parameters with sensor data or sensor data together with soil, landscape, weather and/or management information. Different sensing technologies or different modelling approaches are compared and evaluated. Strategies are developed to use crop sensing data for in-season nitrogen recommendations to improve nitrogen use efficiency and protect the environment

Journal of Agrometeorology

Not AvailableJournal of Agrometeorology Not Availabl

Remote Sensing as a Precision Farming Tool in the Nile Valley, Egypt

Detecting stress in plants resulting from different stressors including nitrogen deficiency, salinity, moisture, contamination and diseases, is crucial in crop production. In the Nile Valley, crop production is hindered perhaps more fundamentally by issues of water supply and salinity. Predicting stress in crops by conventional methods is tedious, laborious and costly and is perhaps unreliable in providing a spatial context of stress patterns. Accurate and quick monitoring techniques for crop status to detect stress in crops at early growth stages are needed to maximize crop productivity. In this context, remotely sensed data may provide a useful tool in precision farming. This research aims to evaluate the role of in situ hyperspectral and high spatial resolution satellite remote sensing data to detect stress in wheat and maize crops and assess whether moisture induced stress can be distinguished from salinity induced stress spectrally. A series of five greenhouse based experiments on wheat and maize were undertaken subjecting both crops to a range of salinity and moisture stress levels. Spectroradiometry measurements were collected at different growth stages of each crop to assess the relationship between crop biophysical and biochemical properties and reflectance measurements from plant canopies. Additionally, high spatial resolution satellite images including two QuickBird, one ASTER and two SPOT HRV were acquired in south-west Alexandria, Egypt to assess the potential of high spectral and spatial resolution satellite imagery to detect stress in wheat and maize at local and regional scales. Two field work visits were conducted in Egypt to collect ground reference data and coupled with Hyperion imagery acquisition, during winter and summer seasons of 2007 in March (8-30: wheat) and July (12-17: maize). Despite efforts, Hyperion imagery was not acquired due to factors out with the control of this research. Strong significant correlations between crop properties and different vegetation indices derived from both ground based and satellite platforms were observed. RDVI showed a sensitive index to different wheat properties (r > 0.90 with different biophysical properties). In maize, GNDVIbr and Cgreen had strong significant correlations with maize biophysical properties (r > 0.80). PCA showed the possibility to distinguish between moisture and salinity induced stress at the grain filling stages. The results further showed that a combined approach of high (2-5 m) and moderate (15-20) spatial resolution satellite imagery can provide a better mechanistic interpretation of the distribution and sources of stress, despite the typical small size of fields (20-50 m scale). QuickBird imagery successfully detects stress within field and local scales, whereas SPOT HRV imagery is useful in detecting stress at a regional scale, and therefore, can be a robust tool in identifying issues of crop management at a regional scale. Due to the limited spectral capabilities of high spatial resolution images, distinguishing different sources of stress is not directly possible, and therefore, hyperspectral satellite imagery (e.g. Hyperion or HyspIRI) is required to distinguish between moisture and salinity induced stress. It is evident from the results that remotely sensed data acquired by both in situ hyperspectral and high spatial resolution satellite remote sensing can be used as a useful tool in precision farming in the Nile Valley, Egypt. A combined approach of using reliable high spatial and spectral satellite remote sensing data could provide better insight about stress at local and regional scales. Using this technique as a precision farming and management tool will lead to improved crop productivity by limiting stress and consequently provide a valuable tool in combating issues of food supply at a time of rapid population growth