Visuo-Haptic Grasping of Unknown Objects through Exploration and Learning on Humanoid Robots

Die vorliegende Arbeit befasst sich mit dem Greifen unbekannter Objekte durch humanoide Roboter. Dazu werden visuelle Informationen mit haptischer Exploration kombiniert, um Greifhypothesen zu erzeugen. Basierend auf simulierten Trainingsdaten wird außerdem eine Greifmetrik gelernt, welche die Erfolgswahrscheinlichkeit der Greifhypothesen bewertet und die mit der größten geschätzten Erfolgswahrscheinlichkeit auswählt. Diese wird verwendet, um Objekte mit Hilfe einer reaktiven Kontrollstrategie zu greifen. Die zwei Kernbeiträge der Arbeit sind zum einen die haptische Exploration von unbekannten Objekten und zum anderen das Greifen von unbekannten Objekten mit Hilfe einer neuartigen datengetriebenen Greifmetrik

Developing a 3-DOF Compliant Perching Arm for a Free-Flying Robot on the International Space Station

This paper presents the design and control of the 3-DOF compliant perching arm for the free-flying Astrobee robots that will operate inside the International Space Station (ISS). The robots are intended to serve as a flexible platform for future guest scientists to use for zero-gravity robotics research - thus, the arm is designed to support manipulation research. It provides a 1-DOF underactuated tendon-driven gripper capable of enveloping a range of objects of different shapes and sizes. Co-located RGB camera and LIDAR sensors provide perception. The Astrobee robots will be capable of grasping each other in flight, to simulate orbital capture scenarios. The arm's end-effector module is swappable on-orbit, allowing guest scientists to add upgraded grippers, or even additional arm degrees of freedom. The design of the arm balances research capabilities with Astrobee's operational need to perch on ISS handrails to reduce power consumption. Basic arm functioning and grip strength were evaluated using an integrated Astrobee prototype riding on a low-friction air bearing

DenseTact-Mini: An Optical Tactile Sensor for Grasping Multi-Scale Objects From Flat Surfaces

Dexterous manipulation, especially of small daily objects, continues to pose complex challenges in robotics. This paper introduces the DenseTact-Mini, an optical tactile sensor with a soft, rounded, smooth gel surface and compact design equipped with a synthetic fingernail. We propose three distinct grasping strategies: tap grasping using adhesion forces such as electrostatic and van der Waals, fingernail grasping leveraging rolling/sliding contact between the object and fingernail, and fingertip grasping with two soft fingertips. Through comprehensive evaluations, the DenseTact-Mini demonstrates a lifting success rate exceeding 90.2% when grasping various objects, spanning items from 1mm basil seeds and small paperclips to items nearly 15mm. This work demonstrates the potential of soft optical tactile sensors for dexterous manipulation and grasping

A low-cost open-source 3-D-printed three-finger gripper platform for research and educational purposes

Robotics research and education have gained significant attention in recent years due to increased development and commercial deployment of industrial and service robots. A majority of researchers working on robot grasping and object manipulation tend to utilize commercially available robot-manipulators equipped with various end effectors for experimental studies. However, commercially available robotic grippers are often expensive and are not easy to modify for specific purposes. To extend the choice of robotic end effectors freely available to researchers and educators, we present an open-source lowcost three-finger robotic gripper platform for research and educational purposes. The 3-D design model of the gripper is presented and manufactured with a minimal number of 3-D-printed components and an off-the-shelf servo actuator. An underactuated finger and gear train mechanism, with an overall gripper assembly design, are described in detail, followed by illustrations and a discussion of the gripper grasping performance and possible gripper platform modifications. The presented open-source gripper platform computer-aided design model is released for downloading on the authors research lab website(www.alaris.kz) and can be utilized by robotics researchers and educators as a design platform to build their own robotic end effector solutions for research and educational purposes