Posture Dependent Vibration Resistance of Serial Robot Manipulators to Applied Oscillating Loads

There are several advantages to replacing CNC machinery with robotic machine tools and as such robotic machining is emerging into the manufacturing and metal cutting industry. There remain several disadvantages to using robots over CNC stations primarily due to flexibility in robotic manipulators, which severely reduces accuracy when operating under high machining forces. This flexibility is dependent on configuration and thus the configuration can be optimised through posture selection to minimise deflection. In previous work little has been done to account for operating frequency and the additional complications that can arise from frequency dependent responses of robotic machine tools. A Fanuc S-360 manipulator was used to experimentally investigate the benefits of including frequency compensation in posture selection. The robot dynamics first had to be identified and experimental modal analysis was selected due the inherent dependency on frequency characteristics. Specifically, a circle fit operation identified modal parameters and a least squares optimisation generated dynamic parameters for a spatial model. A rigid-link flexible-joint model was selected and a pseudo-joint was used to create an additional DOF to accommodate link flexibility. Posture optimisation was performed using a gradient-descent algorithm that used several starting points to identify a global minimum. The results showed that a subset of modal data that excluded the mode shape vectors could be used to create a model to predict the manipulator vibration response. It was also found that the receptance variation of the manipulator with configuration was insufficient to verify the optimisation throughout the entire selected workspace; however the model was shown to be useful in regions containing multiple peaks where the modelled dynamics were dominant over the highly volatile measured data. Simulations were performed on a redundant planar manipulator to overcome the lack of receptance variation found in the Fanuc manipulator. These simulations showed that there were two mechanisms driving the optimisation; overall amplitude reduction and frequency specific amplitude reduction. Using a stiffness posture measure for comparison, the results of the frequency specific reduction could be separated and were found to be particularly beneficial when operating close to resonant frequencies

Proceedings of the NASA Conference on Space Telerobotics, volume 3

The theme of the Conference was man-machine collaboration in space. The Conference provided a forum for researchers and engineers to exchange ideas on the research and development required for application of telerobotics technology to the space systems planned for the 1990s and beyond. The Conference: (1) provided a view of current NASA telerobotic research and development; (2) stimulated technical exchange on man-machine systems, manipulator control, machine sensing, machine intelligence, concurrent computation, and system architectures; and (3) identified important unsolved problems of current interest which can be dealt with by future research

Activities of the Center for Space Construction

The Center for Space Construction (CSC) at the University of Colorado at Boulder is one of eight University Space Engineering Research Centers established by NASA in 1988. The mission of the center is to conduct research into space technology and to directly contribute to space engineering education. The center reports to the Department of Aerospace Engineering Sciences and resides in the College of Engineering and Applied Science. The college has a long and successful track record of cultivating multi-disciplinary research and education programs. The Center for Space Construction is prominent evidence of this record. At the inception of CSC, the center was primarily founded on the need for research on in-space construction of large space systems like space stations and interplanetary space vehicles. The scope of CSC's research has now evolved to include the design and construction of all spacecraft, large and small. Within this broadened scope, our research projects seek to impact the underlying technological basis for such spacecraft as remote sensing satellites, communication satellites, and other special purpose spacecraft, as well as the technological basis for large space platforms. The center's research focuses on three areas: spacecraft structures, spacecraft operations and control, and regolith and surface systems. In the area of spacecraft structures, our current emphasis is on concepts and modeling of deployable structures, analysis of inflatable structures, structural damage detection algorithms, and composite materials for lightweight structures. In the area of spacecraft operations and control, we are continuing our previous efforts in process control of in-orbit structural assembly. In addition, we have begun two new efforts in formal approach to spacecraft flight software systems design and adaptive attitude control systems. In the area of regolith and surface systems, we are continuing the work of characterizing the physical properties of lunar regolith, and we are at work on a project on path planning for planetary surface rovers

Proceedings of the Workshop on Computational Aspects in the Control of Flexible Systems, part 2

The Control/Structures Integration Program, a survey of available software for control of flexible structures, computational efficiency and capability, modeling and parameter estimation, and control synthesis and optimization software are discussed

Robust Position-based Visual Servoing of Industrial Robots

Recently, the researchers have tried to use dynamic pose correction methods to improve the accuracy of industrial robots. The application of dynamic path tracking aims at adjusting the end-effector’s pose by using a photogrammetry sensor and eye-to-hand PBVS scheme. In this study, the research aims to enhance the accuracy of industrial robot by designing a chattering-free digital sliding mode controller integrated with a novel adaptive robust Kalman filter (ARKF) validated on Puma 560 model on simulation. This study includes Gaussian noise generation, pose estimation, design of adaptive robust Kalman filter, and design of chattering-free sliding mode controller. The designed control strategy has been validated and compared with other control strategies in Matlab 2018a Simulink on a 64bits PC computer. The main contributions of the research work are summarized as follows. First, the noise removal in the pose estimation is carried out by the novel ARKF. The proposed ARKF deals with experimental noise generated from photogrammetry observation sensor C-track 780. It exploits the advantages of adaptive estimation method for states noise covariance (Q), least square identification for measurement noise covariance (R) and a robust mechanism for state variables error covariance (P). The Gaussian noise generation is based on the collected data from the C-track when the robot is in a stationary status. A novel method for estimating covariance matrix R considering both effects of the velocity and pose is suggested. Next, a robust PBVS approach for industrial robots based on fast discrete sliding mode controller (FDSMC) and ARKF is proposed. The FDSMC takes advantage of a nonlinear reaching law which results in faster and more accurate trajectory tracking compared to standard DSMC. Substituting the switching function with a continuous nonlinear reaching law leads to a continuous output and thus eliminating the chattering. Additionally, the sliding surface dynamics is considered to be a nonlinear one, which results in increasing the convergence speed and accuracy. Finally, the analysis techniques related to various types of sliding mode controller have been used for comparison. Also, the kinematic and dynamic models with revolutionary joints for Puma 560 are built for simulation validation. Based on the computed indicators results, it is proven that after tuning the parameters of designed controller, the chattering-free FDSMC integrated with ARKF can essentially reduce the effect of uncertainties on robot dynamic model and improve the tracking accuracy of the 6 degree-of-freedom (DOF) robot

Advanced Mobile Robotics: Volume 3

Mobile robotics is a challenging field with great potential. It covers disciplines including electrical engineering, mechanical engineering, computer science, cognitive science, and social science. It is essential to the design of automated robots, in combination with artificial intelligence, vision, and sensor technologies. Mobile robots are widely used for surveillance, guidance, transportation and entertainment tasks, as well as medical applications. This Special Issue intends to concentrate on recent developments concerning mobile robots and the research surrounding them to enhance studies on the fundamental problems observed in the robots. Various multidisciplinary approaches and integrative contributions including navigation, learning and adaptation, networked system, biologically inspired robots and cognitive methods are welcome contributions to this Special Issue, both from a research and an application perspective

Fourth Annual Workshop on Space Operations Applications and Research (SOAR 90)

The proceedings of the SOAR workshop are presented. The technical areas included are as follows: Automation and Robotics; Environmental Interactions; Human Factors; Intelligent Systems; and Life Sciences. NASA and Air Force programmatic overviews and panel sessions were also held in each technical area

Large space structures and systems in the space station era: A bibliography with indexes

Bibliographies and abstracts are listed for 1372 reports, articles, and other documents introduced into the NASA scientific and technical information system between January 1, 1990 and June 30, 1990. Its purpose is to provide helpful information to the researcher, manager, and designer in technology development and mission design according to system, interactive analysis and design, structural and thermal analysis and design, structural concepts and control systems, electronics, advanced materials, assembly concepts, propulsion, and solar power satellite systems