17,157 research outputs found
Recommended from our members
A new partitioning approach for layout synthesis from register-transfer netlists
Most of the IC today are described and documented using heiarchical netlists. In addition to gates, latches, and flip-flops, these netlists include sliceable register-transfer components such as registers, counters, adders, ALUs, shifters, register files, and multiplexers. Usually, these components are decomposed into basic gates, latches, and flip-flops, and are laid out using standard cells. The standard cell architecture requires excessive routing area, and does not exploit the bit-sliced nature of register-transfer components. In this paper, we present a new sliced-layout architecture to alleviate the preceding problems. We also describe partitioning algorithms that are used to generate the floorplan for this layout architecture. The partitioning algorithms not only select the best suited layout style for each component, but also consider critical paths, I/O pin locations, and connections between blocks. This approach improves the overall area utilization and minimizes the total wire length
Limitations and opportunities for wire length prediction in gigascale integration
Wires have become a major source of bottleneck in current VLSI designs, and wire length prediction is therefore essential to overcome these bottlenecks. Wire length prediction is broadly classified into two types: macroscopic prediction, which is the prediction of wire length distribution, and microscopic prediction, which is the prediction of individual wire lengths. The objective of this thesis is to develop a clear understanding of limitations to both macroscopic and microscopic a priori, post-placement, pre-routing wire length predictions, and thereby develop better wire length prediction models.
Investigations carried out to understand the limitations to macroscopic prediction reveal that, in a given design (i) the variability of the wire length distribution increases with length and (ii) the use of Rent s rule with a constant Rent s exponent p, to calculate the terminal count of a given block size, limits the accuracy of the results from a macroscopic model. Therefore, a new model for the parameter p is developed to more accurately reflect the terminal count of a given block size in placement, and using this, a new more accurate macroscopic model is developed. In addition, a model to predict the variability is also incorporated into the macroscopic model.
Studies to understand limitations to microscopic prediction reveal that (i) only a fraction of the wires in a given design are predictable, and these are mostly from shorter nets with smaller degrees and (ii) the current microscopic prediction models are built based on the assumption that a single metric could be used to accurately predict the individual length of all the wires in a design. In this thesis, an alternative microscopic model is developed for the predicting the shorter wires based on a hypothesis that there are multiple metrics that influence the length of the wires. Three different metrics are developed and fitted into a heuristic classification tree framework to provide a unified and more accurate microscopic model.Ph.D.Committee Chair: Dr. Jeff Davis; Committee Member: Dr. James D. Meindl; Committee Member: Dr. Paul Kohl; Committee Member: Dr. Scott Wills; Committee Member: Dr. Sung Kyu Li
Measurement of Through-Going Particle Momentum By Means Of Multiple Scattering With The ICARUS T600 TPC
The ICARUS collaboration has demonstrated, following the operation of a 600
ton (T600) detector at shallow depth, that the technique based on liquid Argon
TPCs is now mature. The study of rare events, not contemplated in the Standard
Model, can greatly benefit from the use of this kind of detectors. In
particular, a deeper understanding of atmospheric neutrino properties will be
obtained thanks to the unprecedented quality of the data ICARUS provides.
However if we concentrate on the T600 performance, most of the
charged current sample will be partially contained, due to the reduced
dimensions of the detector. In this article, we address the problem of how well
we can determine the kinematics of events having partially contained tracks.
The analysis of a large sample of atmospheric muons collected during the T600
test run demonstrate that, in case the recorded track is at least one meter
long, the muon momentum can be reconstructed by an algorithm that measures the
Multiple Coulomb Scattering along the particle's path. Moreover, we show that
momentum resolution can be improved by a factor two using an algorithm based on
the Kalman Filtering technique
Technical Design Report for the PANDA Micro Vertex Detector
This document illustrates the technical layout and the expected performance of the Micro Vertex Detector (MVD) of the PANDA experiment. The MVD will detect charged particles as close as possible to the interaction zone. Design criteria and the optimisation process as well as the technical solutions chosen are discussed and the results of this process are subjected to extensive Monte Carlo physics studies. The route towards realisation of the detector is
outlined
Recommended from our members
Automatic synthesis of analog layout : a survey
A review of recent research in the automatic synthesis of physical geometry for analog integrated circuits is presented. On introduction, an explanation of the difficulties involved in analog layout as opposed to digital layout is covered. Review of the literature then follows. Emphasis is placed on the exposition of general methods for addressing problems specific to analog layout, with the details of specific systems only being given when they surve to illustrate these methods well. The conclusion discusses problems remaining and offers a prediction as to how technology will evolve to solve them. It is argued that although progress has been and will continue to be made in the automation of analog IC layout, due to fundamental differences in the nature of analog IC design as opposed to digital design, it should not be expected that the level of automation of the former will reach that of the latter any time soon
Precision measurement of the neutrino velocity with the ICARUS detector in the CNGS beam
During May 2012, the CERN-CNGS neutrino beam has been operated for two weeks
for a total of 1.8 10^17 pot in bunched mode, with a 3 ns narrow width proton
beam bunches, separated by 100 ns. This tightly bunched beam structure allows a
very accurate time of flight measurement of neutrinos from CERN to LNGS on an
event-by-event basis. Both the ICARUS-T600 PMT-DAQ and the CERN-LNGS timing
synchronization have been substantially improved for this campaign, taking
ad-vantage of additional independent GPS receivers, both at CERN and LNGS as
well as of the deployment of the "White Rabbit" protocol both at CERN and LNGS.
The ICARUS-T600 detector has collected 25 beam-associated events; the
corresponding time of flight has been accurately evaluated, using all different
time synchronization paths. The measured neutrino time of flight is compatible
with the arrival of all events with speed equivalent to the one of light: the
difference between the expected value based on the speed of light and the
measured value is tof_c - tof_nu = (0.10 \pm 0.67stat. \pm 2.39syst.) ns. This
result is in agreement with the value previously reported by the ICARUS
collaboration, tof_c - tof_nu = (0.3 \pm 4.9stat. \pm 9.0syst.) ns, but with
improved statistical and systematic errors.Comment: 21 pages, 13 figures, 1 tabl
Optimisation of ITER Nb3Sn CICCs for coupling loss, transverse electromagnetic load and axial thermal contraction
The ITER cable-in-conduit conductors (CICCs) are built up from sub-cable
bundles, wound in different stages, which are twisted to counter coupling loss
caused by time-changing external magnet fields. The selection of the twist
pitch lengths has major implications for the performance of the cable in the
case of strain sensitive superconductors, i.e. Nb3Sn, as the electromagnetic
and thermal contraction loads are large but also for the heat load from the AC
coupling loss. Reduction of the transverse load and warm-up cool-down
degradation can be reached by applying longer twist pitches in a particular
sequence for the sub-stages, offering a large cable transverse stiffness,
adequate axial flexibility and maximum allowed lateral strand support. Analysis
of short sample (TF conductor) data reveals that increasing the twist pitch can
lead to a gain of the effective axial compressive strain of more than 0.3 %
with practically no degradation from bending. For reduction of the coupling
loss, specific choices of the cabling twist sequence are needed with the aim to
minimize the area of linked strands and bundles that are coupled and form loops
with the applied changing magnetic field, instead of simply avoiding longer
pitches. In addition we recommend increasing the wrap coverage of the CS
conductor from 50 % to at least 70 %. The models predict significant
improvement against strain sensitivity and substantial decrease of the AC
coupling loss in Nb3Sn CICCs, but also for NbTi CICCs minimization of the
coupling loss can be achieved. Although the success of long pitches to
transverse load degradation was already demonstrated, the prediction of the
combination with low coupling loss needs to be validated by a short sample
test.Comment: to be published in Supercond Sci Techno
- âŠ