Wireless industrial monitoring and control networks: the journey so far and the road ahead

While traditional wired communication technologies have played a crucial role in industrial monitoring and control networks over the past few decades, they are increasingly proving to be inadequate to meet the highly dynamic and stringent demands of today’s industrial applications, primarily due to the very rigid nature of wired infrastructures. Wireless technology, however, through its increased pervasiveness, has the potential to revolutionize the industry, not only by mitigating the problems faced by wired solutions, but also by introducing a completely new class of applications. While present day wireless technologies made some preliminary inroads in the monitoring domain, they still have severe limitations especially when real-time, reliable distributed control operations are concerned. This article provides the reader with an overview of existing wireless technologies commonly used in the monitoring and control industry. It highlights the pros and cons of each technology and assesses the degree to which each technology is able to meet the stringent demands of industrial monitoring and control networks. Additionally, it summarizes mechanisms proposed by academia, especially serving critical applications by addressing the real-time and reliability requirements of industrial process automation. The article also describes certain key research problems from the physical layer communication for sensor networks and the wireless networking perspective that have yet to be addressed to allow the successful use of wireless technologies in industrial monitoring and control networks

The Design of Medium Access Control (MAC) Protocols for Energy Efficient and QoS Provision in Wireless Sensor Networks

This thesis work focuses on innovative design of media access control (MAC) protocols in wireless sensor networks (WNSs). The characteristics of the WSN inquire that the network service design considers both energy efficiency and the associated application requirement. However, most existing protocols address only the issue of energy efficiency. In this thesis, a MAC protocol has been proposed (referred to as Q-MAC) that not only minimized the energy consumption in multi-hop WSNs, but also provides Quality of Service (QoS) by differentiating network services based on priority levels prescribed by different applications. The priority levels reflect the state of system resources including residual energy and queue occupancies. Q-MAC contains both intra- and inter- node arbitration mechanisms. The intra-node packet scheduling employs a multiple queuing architectures, and applies a scheduling scheme consisting of packet classification and weighted arbitration. We introduce the Power Conservation MACAW (PC-MACAW), a power-aware scheduling mechanism which, together with the Loosely Prioritized Random Access (LPRA) algorithm, govern the inter-node scheduling. Performance evaluation are conducted between Q-MAC and S-MAC with respect to two performance metrics: energy consumption and average latency. Simulation results indicate Q-MAC achieves comparable performance to that of S-MAC in non-prioritized traffic scenarios. When packets with different priorities are introduced, Q-MAC yields noticeable average latency differentiations between the classes of service, while preserving the same degree of energy consumption as that of S-MAC. Since the high density nature of WSN may introduce heavy traffic load and thus consume large amount of energy for communication, another MAC protocol, referred to as the Deployment-oriented MAC (D-MAC)has been further proposed. D-MAC minimalizes both sensing and communication redundancy by putting majority of redundant nodes into the sleep state. The idea is to establish a sensing and communication backbone covering the whole sensing field with the least sensing and communication redundancy. In specific, we use equal-size rectangular cells to partition the sensing field and chose the size of each cell in a way such that regardless of the actual location within the cell, a node can always sense the whole cell and communicate with all the nodes in neighboring cells. Once the sensing field has been partitioned using these cells, a localized Location-aware Selection Algorithm (LSA) is carried out to pick up only one node within each cell to be active for a fixed amount of period. This selection is energy-oriented, only nodes with a maximum energy will be on and the rest of nodes will be put into the sleep state once the selection process is over. To balance the energy consumption, the selection algorithm is periodically conducted until all the nodes are out of power. Simulation results indicated that D-MAC saves around 80% energy compared to that of S-MAC and Q-MAC, while maintaining 99% coverage. D-MAC is also superior to S-MAC and Q-MAC in terms of average latency. However, the use of GPS in D-MAC in identifying the nodes within the same cell, would cause extra cost and complexity for the design of sensor nodes

IEEE 802.15.4e: a Survey

Several studies have highlighted that the IEEE 802.15.4 standard presents a number of limitations such as low reliability, unbounded packet delays and no protection against interference/fading, that prevent its adoption in applications with stringent requirements in terms of reliability and latency. Recently, the IEEE has released the 802.15.4e amendment that introduces a number of enhancements/modifications to the MAC layer of the original standard in order to overcome such limitations. In this paper we provide a clear and structured overview of all the new 802.15.4e mechanisms. After a general introduction to the 802.15.4e standard, we describe the details of the main 802.15.4e MAC behavior modes, namely Time Slotted Channel Hopping (TSCH), Deterministic and Synchronous Multi-channel Extension (DSME), and Low Latency Deterministic Network (LLDN). For each of them, we provide a detailed description and highlight the main features and possible application domains. Also, we survey the current literature and summarize open research issues

Analysis of the impact of wireless mobile devices in critical industrial applications

The main objective of the thesis is to study the impact of mobile nodes in industrial applications with strict reliability and time constraints in both centralized and decentralized topologies. Considering the harsh wireless channel conditions of industrial environments, that goal implies a considerable challenge. In order not to compromise the performance of the system, a deterministic Real-Time (RT) communication protocol is needed, along with a mechanism to deal with changes in the topology due to the movements of the wireless devices. The existing wireless standard technologies do not satisfy the requirements demanded by the most critical industrial applications such as Distributed Control Systems (DCS) and, thus, wired communication cannot be directly replaced by wireless solutions. Nevertheless, the adoption of wireless communications can be seen as an extension to the existing wired networks to create hybrid networks with mobility requirements. The design of a proper communication solution depends mainly on the choice of the Medium Access Control (MAC) protocol, which is responsible for controlling access to the medium and thereby plays a vital role in decreasing latency and packet errors. Furthermore, the changes in the topology due to the movement of the wireless devices must be managed correctly in order not to affect the performance of the entire network. In this doctoral thesis, a hybrid centralized architecture designed for industrial applications with strict requirements in terms of robustness, determinism and RT is proposed and evaluated. For that, a wireless RT MAC scheme based on the IEEE 802.11 physical layer is proposed along with a Real-Time Ethernet (RTE) MAC scheme. This hybrid system ensures seamless communication between both media. With the aim of including mobile devices in the proposed architecture, a soft-handover algorithm is designed and evaluated. This algorithm guarantees an uninterrupted communication during the handover process without the need for a second radio interface and with a reduced growth in network overhead. Finally, the impact of mobile nodes in a decentralized wireless topology is analysed. For that, the Self-Organizing Time Division Multiple Access (STDMA) protocol is evaluated to analyse its viability as an alternative to carrying out a handover in industrial applications without centralized systems.El objetivo principal de la tesis es estudiar el impacto de los nodos móviles en las aplicaciones inalámbricas industriales con requisitos estrictos de tiempo y robustez tanto para topologías centralizadas como descentralizadas. Este objetivo supone un gran desafío dadas las adversas condiciones del canal inalámbrico en los entornos industriales. Para no comprometer el rendimiento del sistema, es necesario un protocolo de comunicación determinista y con garantías de tiempo real, junto con un mecanismo para hacer frente a los cambios en la topología debido al movimiento de los dispositivos inalámbricos. Las tecnologías estándar inalámbricas existentes no satisfacen los requisitos exigidos por las aplicaciones industriales más críticas, como los Sistemas de Control Distribuido (DCS - Distributed Control Systems) y, por lo tanto, las comunicaciones cableadas no pueden ser reemplazadas directamente por soluciones inalámbricas. Sin embargo, la adopción de las comunicaciones inalámbricas puede verse como una extensión de las redes cableadas existentes con el objetivo de crear redes híbridas con requisitos de movilidad. El diseño de una solución de comunicación adecuada depende principalmente de la elección del protocolo de control de acceso al medio (MAC - Medium Access Control), el cual, desempeña un papel vital en la disminución de la latencia y del número de paquetes erróneos. Además, los cambios en la topología debidos al movimiento de los dispositivos inalámbricos deben gestionarse correctamente para que el rendimiento de toda la red no se vea afectado. En esta tesis doctoral se propone y se evalúa una arquitectura híbrida centralizada diseñada para aplicaciones industriales con requisitos estrictos de robustez, determinismo y tiempo real. Para ello, se propone un esquema MAC inalámbrico con garantías de tiempo real basado en la capa física IEEE 802.11 junto con un esquema MAC basado en Ethernet en tiempo real (RTE - Real-Time Ethernet). Este esquema híbrido garantiza una comunicación continua entre ambos medios de comunicación. Con el objetivo de incluir dispositivos móviles en la arquitectura propuesta, se propone y evalúa un algoritmo de soft-handover. Este algoritmo garantiza una comunicación ininterrumpida durante el proceso de handover sin la necesidad de una segunda interfaz de radio y con un aumento reducido de la sobrecarga de la red. Finalmente, se analiza el impacto de los nodos móviles en una topología inalámbrica descentralizada. Para ello, se evalúa el protocolo del estado del arte Self-Organizing Time Division Multiple Access (STDMA) con el objetivo de analizar su viabilidad como alternativa para realizar un handover en las aplicaciones industriales sin sistemas centralizados.Tesi honen helburu nagusia, nodo mugikorrek fidagarritasun eta denboraren aldetik baldintza ugari eskatzen duten aplikazio industrial zentralizatu eta deszentralizatuetan duten eragina aztertzea da. Eremu industrialetako haririk gabeko kanaletan ematen diren komunikazioetarako baldintza bereziki aurkakoak direla medio, helburu honek erronka handia sortzen du. Sarearen errendimendua arriskuan ez jartzeko, determinista eta denbora errealeko komunikazio protokolo bat beharrezkoa da, haririk gabeko nodoen mugimenduaren ondorioz topologiaren aldaketei aurre egiteko mekanismo batekin batera. Haririk gabeko teknologia estandarrek ez dute aplikazio industrial kritikoenek dituzten baldintzak betetzen eta, beraz, kable bidezko komunikazioak ezin dira haririk gabeko sistemekin ordezkatu. Hala ere, haririk gabeko komunikazioen erabilpena jadanik existitzen diren kable bidezko komunikazioen hedadura bezala kontsidera daiteke, mobilitate baldintzak dituzten sare hibridoak sortuz. Komunikazio sistemaren diseinu egokia Medium Access Control (MAC) protokoloaren hautaketa zuzenean oinarritzen da gehien bat, sarbidea kontrolatzeaz arduratzen baita, honela ezinbesteko papera izanik latentzian eta pakete erroreen murrizketan. Horretaz aparte, bai sare zentralizatu eta deszentralizatuen kasuan, haririk gabeko nodoen mugimenduek sortutako tipologia aldaketak azkar eta zuzen kudeatu behar dira sare osoko errendimenduak kalterik ez jasateko. Doktore tesi honetan, fidagarritasun zorrotz, determinismo eta denbora-errealeko baldintzak dituzten industria aplikazioetarako arkitektura hibrido zentralizatu bat proposatu eta ebaluatu da. Horretarako, IEEE 802.11 maila fisikoan oinarritutako haririk gabeko MAC eskema bat proposatu da, Real-Time Ethernet-en (RTE) oinarritutako MAC eskema batekin batera. Eskema hibrido honek bi komunikabideen artean etengabeko komunikazioa bermatzen du. Proposatutako arkitekturan nodo mugikorrak kontuan hartu ahal izateko, soft-handover algoritmo bat proposatu eta ebaluatu da. Algoritmo honek etenik gabeko komunikazioa bermatzen du handover prozesuan zehar bigarren irrati interfaze baten beharrik gabe eta sareko gainkarga oso gutxi handituz. Azkenik, nodo mugikorrek duten eragina haririk gabeko topologia deszentralizatuetan aztertu da. Horretako, bibliografiako Self-Organizing Time Division Multiple Access (STDMA) protokoloa ebaluatu da industrial aplikazioetako sistema zentralizatuen handover mekanismoaren alternatiba gisa

Time-Driven Access and Forwarding for Industrial Wireless Multihop Networks

The deployment of wireless technologies in industrial networks is very promising mainly due to their inherent flexibility. However, current wireless solutions lack the capability to provide the deterministic, low delay service required by many industrial applications. Moreover, the high level of interference generated by industrial equipment limits the coverage that ensures acceptable performance. Multi-hop solutions, when combining frame forwarding with higher node density, have the potential to provide the needed coverage while keeping radio communication range short. However, in multi-hop solutions the medium access time at each of the nodes traversed additively contributes to the end-to-end delay and the forwarding delay (i.e., the time required for packets to be processed, switched, and queued) at each node is to be added as well. This paper describes Time-driven Access and Forwarding (TAF), a solution for guaranteeing deterministic delay, at both the access and forwarding level, in wireless multi-hop networks, analyzes its properties, and assesses its performance in industrial scenario