Planning dextrous robot hand grasps from range data, using preshapes and digit trajectories

Dextrous robot hands have many degrees of freedom. This enables the manipulation of objects between the digits of the dextrous hand but makes grasp planning substantially more complex than for parallel jaw grippers. Much of the work that addresses grasp planning for dextrous hands concentrates on the selection of contact sites to optimise stability criteria and ignores the kinematics of the hand. In more complete systems, the paradigm of preshaping has emerged as dominant. However, the criteria for the formation and placement of the preshapes have not been adequately examined, and the usefulness of the systems is therefore limited to grasping simple objects for which preshapes can be formed using coarse heuristics.In this thesis a grasp metric based on stability and kinematic feasibility is introduced. The preshaping paradigm is extended to include consideration of the trajectories that the digits take during closure from preshape to final grasp. The resulting grasp family is dependent upon task requirements and is designed for a set of "ideal" object-hand configurations. The grasp family couples the degrees of freedom of the dextrous hand in an anthropomorphic manner; the resulting reduction in freedom makes the grasp planning less complex. Grasp families are fitted to real objects by optimisation of the grasp metric; this corresponds to fitting the real object-hand configuration as close to the ideal as possible. First, the preshape aperture, which defines the positions of the fingertips in the preshape, is found by optimisation of an approximation to the grasp metric (which makes simplifying assumptions about the digit trajectories and hand kinematics). Second, the full preshape kinematics and digit closure trajectories are calculated to optimise the full grasp metric.Grasps are planned on object models built from laser striper range data from two viewpoints. A surface description of the object is used to prune the space of possible contact sites and to allow the accurate estimation of normals, which is required by the grasp metric to estimate the amount of friction required. A voxel description, built by ray-casting, is used to check for collisions between the object and the robot hand using an approximation to the Euclidean distance transform.Results are shown in simulation for a 3-digit hand model, designed to be like a simplified human hand in terms of its size and functionality. There are clear extensions of the method to any dextrous hand with a single thumb opposing multiple fingers and several different hand models that could be used are described. Grasps are planned on a wide variety of curved and polyhedral object

\u3cem\u3eGRASP News\u3c/em\u3e, Volume 6, Number 1

A report of the General Robotics and Active Sensory Perception (GRASP) Laboratory, edited by Gregory Long and Alok Gupta

Grasp planning for object manipulation by an autonomous robot

L'évolution autonome d'un robot dans un environnement évolutif nécessite qu'il soit doté de capacités de perception, d'action et de décision suffisantes pour réaliser la tâche assignée. Une tâche essentielle en robotique est la manipulation d'objets et d'outils. Elle intervient non seulement pour un robot seul mais également dans des situations d'interaction avec un humain ou un autre robot quand il s’agit d’échanger des objets ou de les manipuler conjointement.\ud Cette thèse porte sur la planification de tâches de manipulation d'objets pour un robot autonome dans un environnement humain. Une architecture logicielle susceptible de résoudre ce type de problèmes au niveau géométrique est proposée. Généralement, une tâche de manipulation commence par une opération de saisie dont la qualité conditionne fortement la réussite de la tâche et pour laquelle nous proposons un planificateur basé sur les propriétés inertielles de l'objet et une décomposition en éléments quasi-convexes tout en prenant en compte les contraintes imposées par le système mobile complet dans un environnement donné.\ud Les résultats sont validés en simulation et sur le robot sur la base d’une extension des outils de planification développés au LAAS-CNRS. Le modèle géométrique 3D de l’objet peut être connu a priori ou bien acquis en ligne. Des expérimentations menées sur un robot manipulateur mobile équipé d'une pince à trois points de contacts, de capteurs de force et d'une paire de caméras stéréoscopiques ont montré la validité de l'approche.\ud The autonomous robot performance in a dynamic environment requires advanced perception, action and decision capabilities. Interaction with the environment plays a key role for a robot and it is well illustrated in object and/or tool manipulation. Interaction with humans or others robots can consist in object exchanges.\ud This thesis deals with object manipulation planning by an autonomous robot in human environments. A software architecture is proposed that is capable to solve such problems at the geometrical level. In general, a manipulation task starts by a grasp operation which quality influences strongly the success of the overall task. We propose a planner based on object inertial properties and an approximate convex decomposition. The whole mobile system taken into account in the planning process.\ud The planner has been completely implemented as an extension of the planning tools developed at LAAS-CNRS. Its results have been tested in simulation and on a robotic platform. Object models may be known a priori or acquired on-line. Experiments have been carried out with a mobile manipulator equipped with a three fingers gripper, a wrist force sensor and a stereo camera system in order to validate the approach.\ud \ud \u

Sensing and Control for Robust Grasping with Simple Hardware

Robots can move, see, and navigate in the real world outside carefully structured factories, but they cannot yet grasp and manipulate objects without human intervention. Two key barriers are the complexity of current approaches, which require complicated hardware or precise perception to function effectively, and the challenge of understanding system performance in a tractable manner given the wide range of factors that impact successful grasping. This thesis presents sensors and simple control algorithms that relax the requirements on robot hardware, and a framework to understand the capabilities and limitations of grasping systems.Engineering and Applied Science

Proceedings of the NASA Conference on Space Telerobotics, volume 2

These proceedings contain papers presented at the NASA Conference on Space Telerobotics held in Pasadena, January 31 to February 2, 1989. The theme of the Conference was man-machine collaboration in space. The Conference provided a forum for researchers and engineers to exchange ideas on the research and development required for application of telerobotics technology to the space systems planned for the 1990s and beyond. The Conference: (1) provided a view of current NASA telerobotic research and development; (2) stimulated technical exchange on man-machine systems, manipulator control, machine sensing, machine intelligence, concurrent computation, and system architectures; and (3) identified important unsolved problems of current interest which can be dealt with by future research

Fourth Annual Workshop on Space Operations Applications and Research (SOAR 90)

The proceedings of the SOAR workshop are presented. The technical areas included are as follows: Automation and Robotics; Environmental Interactions; Human Factors; Intelligent Systems; and Life Sciences. NASA and Air Force programmatic overviews and panel sessions were also held in each technical area

Proceedings of the NASA Conference on Space Telerobotics, volume 5

Papers presented at the NASA Conference on Space Telerobotics are compiled. The theme of the conference was man-machine collaboration in space. The conference provided a forum for researchers and engineers to exchange ideas on the research and development required for the application of telerobotics technology to the space systems planned for the 1990's and beyond. Volume 5 contains papers related to the following subject areas: robot arm modeling and control, special topics in telerobotics, telerobotic space operations, manipulator control, flight experiment concepts, manipulator coordination, issues in artificial intelligence systems, and research activities at the Johnson Space Center

Intelligent gripper design and application for automated part recognition and gripping

Intelligent gripping may be achieved through gripper design, automated part recognition, intelligent algorithm for control of the gripper, and on-line decision-making based on sensory data. A generic framework which integrates sensory data, part recognition, decision-making and gripper control to achieve intelligent gripping based on ABB industrial robot is constructed. The three-fingered gripper actuated by a linear servo actuator designed and developed in this project for precise speed and position control is capable of handling a large variety of objects. Generic algorithms for intelligent part recognition are developed. Edge vector representation is discussed. Object geometric features are extracted. Fuzzy logic is successfully utilized to enhance the intelligence of the system. The generic fuzzy logic algorithm, which may also find application in other fields, is presented. Model-based gripping planning algorithm which is capable of extracting object grasp features from its geometric features and reasoning out grasp model for objects with different geometry is proposed. Manipulator trajectory planning solves the problem of generating robot programs automatically. Object-oriented programming technique based on Visual C++ MFC is used to constitute the system software so as to ensure the compatibility, expandability and modular programming design. Hierarchical architecture for intelligent gripping is discussed, which partitions the robot’s functionalities into high-level (modeling, recognizing, planning and perception) layers, and low-level (sensing, interfacing and execute) layers. Individual system modules are integrated seamlessly to constitute the intelligent gripping system

A 3-d modular gripper design tool

Modular fixturing kits are precisely machined sets of components used for flexible, short-turnaround construction of fixtures for a variety of manufacturing purposes. A modular vise is a parallel-jaw vise, where each jaw is a modular fixture plate with a regular grid of precisely positioned holes. A modular vise can be used to locate and hold parts for machining, assembly, and inspection tasks. To fixture a part, one places pins in some of the holes so that when the vise is closed, the part is reliably located and completely constrained. The modular vise concept can be adapted easily to the design of modular parallel-jaw grippers for robots. By attaching a grid plate to each jaw of a parallel-jaw gripper, the authors gain the ability to easily construct high-quality grasps for a wide variety of parts from a standard set of hardware. Wallack and Canny developed a previous algorithm for planning planar grasp configurations for the modular vise. In this paper, the authors expand this work to produce a 3-d fixture/gripper design tool. They describe several analyses added to the planar algorithm to improve its utility, including a three-dimensional grasp quality metric based on geometric and force information, three-dimensional geometric loading analysis, and inter-gripper interference analysis to determine the compatibility of multiple grasps for handing the part from one gripper to another. Finally, the authors describe two applications which combine the utility of modular vise-style grasping with inter-gripper interference: The first is the design of a flexible part-handling subsystem for a part cleaning workcell under development at Sandia National Laboratories; the second is the automatic design of grippers that support the assembly of multiple products on a single assembly line