Experimental assessment of the effects of cross-traffic on Wi-Fi video streaming

Wi-Fi networks are the first and sometimes only choice for the video streaming in homes, airports, malls, public areas and museums. However, Wi-Fi networks are vulnerable to interference, noise and have bandwidth limitations. Due to the intrinsic vulnerability of the communication channel, and the large number of variables involved, simulation alone is not enough in the evaluation of the performance of wireless networks. Actually, there is a tendency to give experimental tests a central role in the assessment of Wi-Fi networks performance. The paper presents an experimental analysis of the effects of cross traffic on the performance of video streaming over Wi-Fi, based on cross-layer measurements. Experiments are carried out in a semi-anechoic chamber, to prevent the results from being influenced by external factors. The experimental results permit to analyze the influence of cross traffic characteristics on cross layer measures and objective video quality metrics evaluated through a standardized approach

PERFORMANCE EVALUATION OF CROSS-LAYER DESIGN WITH DISTRIBUTED AND SEQUENTIAL MAPPING SCHEME FOR VIDEO APPLICATION OVER IEEE 802.11E

The rapid development of wireless communication imposes several challenges to support QoS for real-time multimedia applications such as video stream applications. Researchers tackled these challenges from different points of view including the semantics of the video to achieve better QoS requirements. The main goal of this research is to design a UDP protocol to realize a distributed sequential mapping scheme (DSM) with a cross-layer design and evaluate its accuracy under different network conditions. In DSM, the perceived quality of a multi-layer video is addressed by mapping each video layer into channel resources represented as queues or access categories (ACs) existing in IEEE 802.11e MAC layer. This research work further investigates the efficiency of this scheme with actual implementation and thorough simulation experiments. The experiments reported the efficiency of this scheme with the presence of different composite traffic models covering most known traffic scenarios using Expected Reconstructed Video Layers (ERVL) and packet loss rate as accuracy measures. This research work also investigates the accuracy of calculating the ERVL compared to its value using actual readings of layers drop rate. The effect of changing the ACs queue size on the ERVL is studied. The use of this scheme shows zero-drop in the base layer in almost all scenarios where no ongoing traffic is presented except that the testing video sessions between nodes. In these experiments, the ERVL continuously reported high values for the number of expected reconstructed video layers. While these values dramatically vary when introducing ongoing different composite traffic models together with the testing video sessions between nodes. Finally, a 40% increase in the ACs queue size shows significant improvement on ERVL while an increase of the queue size beyond this value has very little significance on ERVL

An improved medium access control protocol for real-time applications in WLANs and its firmware development

The IEEE 802.11 Wireless Local Area Network (WLAN), commonly known as Wi-Fi, has emerged as a popular internet access technology and researchers are continuously working on improvement of the quality of service (QoS) in WLAN by proposing new and efficient schemes. Voice and video over Internet Protocol (VVoIP) applications are becoming very popular in Wi-Fi enabled portable/handheld devices because of recent technological advancements and lower service costs. Different from normal voice and video streaming, these applications demand symmetric throughput for the upstream and downstream. Existing Wi-Fi standards are optimised for generic internet applications and fail to provide symmetric throughput due to traffic bottleneck at access points. Performance analysis and benchmarking is an integral part of WLAN research, and in the majority of the cases, this is done through computer simulation using popular network simulators such as Network Simulator ff 2 (NS-2) or OPNET. While computer simulation is an excellent approach for saving time and money, results generated from computer simulations do not always match practical observations. This is why, for proper assessment of the merits of a proposed system in WLAN, a trial on a practical hardware platform is highly recommended and is often a requirement. In this thesis work, with a view to address the abovementioned challenges for facilitating VoIP and VVoIP services over Wi-Fi, two key contributions are made: i) formulating a suitable medium access control (MAC) protocol to address symmetric traffic scenario and ii) firmware development of this newly devised MAC protocol for real WLAN hardware. The proposed solution shows signifocant improvements over existing standards by supporting higher number of stations with strict QoS criteria. The proposed hardware platform is available off-the-shelf in the market and is a cost effective way of generating and evaluating performance results on a hardware system

Quality of service differentiation for multimedia delivery in wireless LANs

Delivering multimedia content to heterogeneous devices over a variable networking environment while maintaining high quality levels involves many technical challenges. The research reported in this thesis presents a solution for Quality of Service (QoS)-based service differentiation when delivering multimedia content over the wireless LANs. This thesis has three major contributions outlined below: 1. A Model-based Bandwidth Estimation algorithm (MBE), which estimates the available bandwidth based on novel TCP and UDP throughput models over IEEE 802.11 WLANs. MBE has been modelled, implemented, and tested through simulations and real life testing. In comparison with other bandwidth estimation techniques, MBE shows better performance in terms of error rate, overhead, and loss. 2. An intelligent Prioritized Adaptive Scheme (iPAS), which provides QoS service differentiation for multimedia delivery in wireless networks. iPAS assigns dynamic priorities to various streams and determines their bandwidth share by employing a probabilistic approach-which makes use of stereotypes. The total bandwidth to be allocated is estimated using MBE. The priority level of individual stream is variable and dependent on stream-related characteristics and delivery QoS parameters. iPAS can be deployed seamlessly over the original IEEE 802.11 protocols and can be included in the IEEE 802.21 framework in order to optimize the control signal communication. iPAS has been modelled, implemented, and evaluated via simulations. The results demonstrate that iPAS achieves better performance than the equal channel access mechanism over IEEE 802.11 DCF and a service differentiation scheme on top of IEEE 802.11e EDCA, in terms of fairness, throughput, delay, loss, and estimated PSNR. Additionally, both objective and subjective video quality assessment have been performed using a prototype system. 3. A QoS-based Downlink/Uplink Fairness Scheme, which uses the stereotypes-based structure to balance the QoS parameters (i.e. throughput, delay, and loss) between downlink and uplink VoIP traffic. The proposed scheme has been modelled and tested through simulations. The results show that, in comparison with other downlink/uplink fairness-oriented solutions, the proposed scheme performs better in terms of VoIP capacity and fairness level between downlink and uplink traffic

Contributions to QoS and energy efficiency in wi-fi networks

The Wi-Fi technology has been in the recent years fostering the proliferation of attractive mobile computing devices with broadband capabilities. Current Wi-Fi radios though severely impact the battery duration of these devices thus limiting their potential applications. In this thesis we present a set of contributions that address the challenge of increasing energy efficiency in Wi-Fi networks. In particular, we consider the problem of how to optimize the trade-off between performance and energy effciency in a wide variety of use cases and applications. In this context, we introduce novel energy effcient algorithms for real-time and data applications, for distributed and centralized Wi-Fi QoS and power saving protocols and for Wi-Fi stations and Access Points. In addition, the di¿erent algorithms presented in this thesis adhere to the following design guidelines: i) they are implemented entirely at layer two, and can hence be easily re-used in any device with a Wi-Fi interface, ii) they do not require modi¿cations to current 802.11 standards, and can hence be readily deployed in existing Wi-Fi devices, and iii) whenever possible they favor client side solutions, and hence mobile computing devices implementing them can benefit from an increased energy efficiency regardless of the Access Point they connect to. Each of our proposed algorithms is thoroughly evaluated by means of both theoretical analysis and packet level simulations. Thus, the contributions presented in this thesis provide a realistic set of tools to improve energy efficiency in current Wi-Fi networks

Video QoS/QoE over IEEE802.11n/ac: A Contemporary Survey

The demand for video applications over wireless networks has tremendously increased, and IEEE 802.11 standards have provided higher support for video transmission. However, providing Quality of Service (QoS) and Quality of Experience (QoE) for video over WLAN is still a challenge due to the error sensitivity of compressed video and dynamic channels. This thesis presents a contemporary survey study on video QoS/QoE over WLAN issues and solutions. The objective of the study is to provide an overview of the issues by conducting a background study on the video codecs and their features and characteristics, followed by studying QoS and QoE support in IEEE 802.11 standards. Since IEEE 802.11n is the current standard that is mostly deployed worldwide and IEEE 802.11ac is the upcoming standard, this survey study aims to investigate the most recent video QoS/QoE solutions based on these two standards. The solutions are divided into two broad categories, academic solutions, and vendor solutions. Academic solutions are mostly based on three main layers, namely Application, Media Access Control (MAC) and Physical (PHY) which are further divided into two major categories, single-layer solutions, and cross-layer solutions. Single-layer solutions are those which focus on a single layer to enhance the video transmission performance over WLAN. Cross-layer solutions involve two or more layers to provide a single QoS solution for video over WLAN. This thesis has also presented and technically analyzed QoS solutions by three popular vendors. This thesis concludes that single-layer solutions are not directly related to video QoS/QoE, and cross-layer solutions are performing better than single-layer solutions, but they are much more complicated and not easy to be implemented. Most vendors rely on their network infrastructure to provide QoS for multimedia applications. They have their techniques and mechanisms, but the concept of providing QoS/QoE for video is almost the same because they are using the same standards and rely on Wi-Fi Multimedia (WMM) to provide QoS

Treatment-Based Classi?cation in Residential Wireless Access Points

IEEE 802.11 wireless access points (APs) act as the central communication hub inside homes, connecting all networked devices to the Internet. Home users run a variety of network applications with diverse Quality-of-Service requirements (QoS) through their APs. However, wireless APs are often the bottleneck in residential networks as broadband connection speeds keep increasing. Because of the lack of QoS support and complicated configuration procedures in most off-the-shelf APs, users can experience QoS degradation with their wireless networks, especially when multiple applications are running concurrently. This dissertation presents CATNAP, Classification And Treatment iN an AP , to provide better QoS support for various applications over residential wireless networks, especially timely delivery for real-time applications and high throughput for download-based applications. CATNAP consists of three major components: supporting functions, classifiers, and treatment modules. The supporting functions collect necessary flow level statistics and feed it into the CATNAP classifiers. Then, the CATNAP classifiers categorize flows along three-dimensions: response-based/non-response-based, interactive/non-interactive, and greedy/non-greedy. Each CATNAP traffic category can be directly mapped to one of the following treatments: push/delay, limited advertised window size/drop, and reserve bandwidth. Based on the classification results, the CATNAP treatment module automatically applies the treatment policy to provide better QoS support. CATNAP is implemented with the NS network simulator, and evaluated against DropTail and Strict Priority Queue (SPQ) under various network and traffic conditions. In most simulation cases, CATNAP provides better QoS supports than DropTail: it lowers queuing delay for multimedia applications such as VoIP, games and video, fairly treats FTP flows with various round trip times, and is even functional when misbehaving UDP traffic is present. Unlike current QoS methods, CATNAP is a plug-and-play solution, automatically classifying and treating flows without any user configuration, or any modification to end hosts or applications

Flexible cross layer optimization for fixed and mobile broadband telecommunication networks and beyond

In der heutigen Zeit, in der das Internet im Allgemeinen und Telekommunikationsnetze im Speziellen kritische Infrastrukturen erreicht haben, entstehen hohe Anforderungen und neue Herausforderungen an den Datentransport in Hinsicht auf Effizienz und Flexibilität. Heutige Telekommunikationsnetze sind jedoch rigide und statisch konzipiert, was nur ein geringes Maß an Flexibilität und Anpassungsfähigkeit der Netze ermöglicht und darüber hinaus nur im begrenzten Maße die Wichtigkeit von Datenflüssen im wiederspiegelt. Diverse Lösungsansätze zum kompletten Neuentwurf als auch zum evolutionären Konzept des Internet wurden ausgearbeitet und spezifiziert, um diese neuartigen Anforderungen und Herausforderungen adäquat zu adressieren. Einer dieser Ansätze ist das Cross Layer Optimierungs-Paradigma, welches eine bisher nicht mögliche direkte Kommunikation zwischen verteilten Funktionalitäten unterschiedlichen Typs ermöglicht, um ein höheres Maß an Dienstgüte zu erlangen. Ein wesentlicher Indikator, welcher die Relevanz dieses Ansatzes unterstreicht, zeichnet sich durch die Programmierbarkeit von Netzwerkfunktionalitäten aus, welche sich aus der Evolution von heutigen hin zu zukünftigen Netzen erkennen lässt. Dieses Konzept wird als ein vielversprechender Lösungsansatz für Kontrollmechanismen von Diensten in zukünftigen Kernnetzwerken erachtet. Dennoch existiert zur Zeit der Entstehung dieser Doktorarbeit kein Ansatz zur Cross Layer Optimierung in Festnetz-und Mobilfunknetze, welcher der geforderten Effizienz und Flexibilität gerecht wird. Die übergeordnete Zielsetzung dieser Arbeit adressiert die Konzeptionierung, Entwicklung und Evaluierung eines Cross Layer Optimierungsansatzes für Telekommunikationsnetze. Einen wesentlichen Schwerpunkt dieser Arbeit stellt die Definition einer theoretischen Konzeptionierung und deren praktischer Realisierung eines Systems zur Cross Layer Optimierung für Telekommunikationsnetze dar. Die durch diese Doktorarbeit analysierten wissenschaftlichen Fragestellungen betreffen u.a. die Anwendbarkeit von Cross Layer Optimierungsansätzen auf Telekommunikationsnetzwerke; die Betrachtung neuartiger Anforderungen; existierende Konzepte, Ansätze und Lösungen; die Abdeckung neuer Funktionalitäten durch bereits existierende Lösungen; und letztendlich den erkennbaren Mehrwert des neu vorgeschlagenen Konzepts gegenüber den bestehenden Lösungen. Die wissenschaftlichen Beiträge dieser Doktorarbeit lassen sich grob durch vier Säulen skizzieren: Erstens werden der Stand der Wissenschaft und Technik analysiert und bewertet, Anforderungen erhoben und eine Lückenanalyse vorgenommen. Zweitens werden Herausforderungen, Möglichkeiten, Limitierungen und Konzeptionierungsaspekte eines Modells zur Cross Layer Optimierung analysiert und evaluiert. Drittens wird ein konzeptionelles Modell - Generic Adaptive Resource Control (GARC) - spezifiziert, als Prototyp realisiert und ausgiebig validiert. Viertens werden theoretische und praktische Beiträge dieser Doktorarbeit vertiefend analysiert und bewertet.As the telecommunication world moves towards a data-only network environment, signaling, voice and other data are similarly transported as Internet Protocol packets. New requirements, challenges and opportunities are bound to this transition and influence telecommunication architectures accordingly. In this time in which the Internet in general, and telecommunication networks in particular, have entered critical infrastructures and systems, it is of high importance to guarantee efficient and flexible data transport. A certain level of Quality-of-Service (QoS) for critical services is crucial even during overload situations in the access and core network, as these two are the bottlenecks in the network. However, the current telecommunication architecture is rigid and static, which offers very limited flexibility and adaptability. Several concepts on clean slate as well as evolutionary approaches have been proposed and defined in order to cope with these new challenges and requirements. One of these approaches is the Cross Layer Optimization paradigm. This concept omits the strict separation and isolation of the Application-, Control- and Network-Layers as it enables interaction and fosters Cross Layer Optimization among them. One indicator underlying this trend is the programmability of network functions, which emerges clearly during the telecommunication network evolution towards the Future Internet. The concept is regarded as one solution for service control in future mobile core networks. However, no standardized approach for Cross Layer signaling nor optimizations in between the individual layers have been standardized at the time this thesis was written. The main objective of this thesis is the design, implementation and evaluation of a Cross Layer Optimization concept on telecommunication networks. A major emphasis is given to the definition of a theoretical model and its practical realization through the implementation of a Cross Layer network resource optimization system for telecommunication systems. The key questions answered through this thesis are: in which way can the Cross Layer Optimization paradigm be applied on telecommunication networks; which new requirements arise; which of the required functionalities cannot be covered through existing solutions, what other conceptual approaches already exist and finally whether such a new concept is viable. The work presented in this thesis and its contributions can be summarized in four parts: First, a review of related work, a requirement analysis and a gap analysis were performed. Second, challenges, limitations, opportunities and design aspects for specifying an optimization model between application and network layer were formulated. Third, a conceptual model - Generic Adaptive Resource Control (GARC) - was specified and its prototypical implementation was realized. Fourth, the theoretical and practical thesis contributions was validated and evaluated

Final report on the evaluation of RRM/CRRM algorithms

Deliverable public del projecte EVERESTThis deliverable provides a definition and a complete evaluation of the RRM/CRRM algorithms selected in D11 and D15, and evolved and refined on an iterative process. The evaluation will be carried out by means of simulations using the simulators provided at D07, and D14.Preprin