Wireless Sensor Based on Bluetooth Technology

Projet SED-RALThis document discusses a project which aimed of building a wireless sensor device. The objective of the project is to master a new sensor approach. Target applications are robotic systems including medical robots. This project is decomposed in two phases. These two phases are reported in the main parts of this document (overview and proof-of-concept prototype). The first phase deals with concept and general architecture. The following actions take place:     We present target applications, and the kind of sensor that can be used in them.      Existing similar research projects were investigated: Usually, documents related to these projects are open documents. That means that one has an idea about how work has been done, and what can be done (limits) in terms of technology. The drawbacks are that final products do not exist or that they are not described in any document.      We investigated also off-the-shelf (commercial) wireless sensors: This class of information is useful to know what is reachable in terms of final products. However, you do not know how company did it: the "Commercial product"term implies usually a secret process.     We list the electronic modules, which can be candidate for a wireless sensor device. That implies RF (Radio Frequency) modules, micro controller modules, energy technology, and sensor devices.     We report uncertainties about technology and functionality that should be cleared up within a prototype project. The second phase is related to a proof-of-concept prototype. The goal of this prototype is to know if the concept, as defined during the first phase, works in real. We report how we successfully built a wireless sensor. Aspects presented are as follows: About the test bed itself: specification, hardware description, embedded software, purchased list and cost, are given. About the development environment: tools for programming and debugging the test bed, and experiments per-formed are described. We report also the experiments results and discuss the prototype. Off-the-shelf modules have been bought when existing. We tested the concept by using a dual axis inclination sensor. We chose this sensor because we had a previous experience with it. When designing the test bed, we tried, as much as possible, to get close to a usable product. Therefore, we took care of the sensor dimensions, the power consumption, etc

ENABLING HARDWARE TECHNOLOGIES FOR AUTONOMY IN TINY ROBOTS: CONTROL, INTEGRATION, ACTUATION

The last two decades have seen many exciting examples of tiny robots from a few cm3 to less than one cm3. Although individually limited, a large group of these robots has the potential to work cooperatively and accomplish complex tasks. Two examples from nature that exhibit this type of cooperation are ant and bee colonies. They have the potential to assist in applications like search and rescue, military scouting, infrastructure and equipment monitoring, nano-manufacture, and possibly medicine. Most of these applications require the high level of autonomy that has been demonstrated by large robotic platforms, such as the iRobot and Honda ASIMO. However, when robot size shrinks down, current approaches to achieve the necessary functions are no longer valid. This work focused on challenges associated with the electronics and fabrication. We addressed three major technical hurdles inherent to current approaches: 1) difficulty of compact integration; 2) need for real-time and power-efficient computations; 3) unavailability of commercial tiny actuators and motion mechanisms. The aim of this work was to provide enabling hardware technologies to achieve autonomy in tiny robots. We proposed a decentralized application-specific integrated circuit (ASIC) where each component is responsible for its own operation and autonomy to the greatest extent possible. The ASIC consists of electronics modules for the fundamental functions required to fulfill the desired autonomy: actuation, control, power supply, and sensing. The actuators and mechanisms could potentially be post-fabricated on the ASIC directly. This design makes for a modular architecture. The following components were shown to work in physical implementations or simulations: 1) a tunable motion controller for ultralow frequency actuation; 2) a nonvolatile memory and programming circuit to achieve automatic and one-time programming; 3) a high-voltage circuit with the highest reported breakdown voltage in standard 0.5 μm CMOS; 4) thermal actuators fabricated using CMOS compatible process; 5) a low-power mixed-signal computational architecture for robotic dynamics simulator; 6) a frequency-boost technique to achieve low jitter in ring oscillators. These contributions will be generally enabling for other systems with strict size and power constraints such as wireless sensor nodes

Optically Powered Highly Energy-efficient Sensor Networks

In optically powered networks, both, communication signals and power for remotely located sensor nodes, are transmitted over an optical fiber. Key features of optically powered networks are node operation without local power supplies or batteries as well as operation with negligible susceptibility to electro-magnetic interference and to lightning. In this book, different kinds of optically powered devices and networks are investigated, and selected applications are demonstrated

Faculty of Engineering and Design. Research Review

STUDENTS AND ACADEMICS - This publication introduces you to the department or school and then each faculty member’s research areas, research applications, and their most recent activities. A comprehensive index can be found at the back of this publication to help guide you by specific areas of interest, as well as point out interdisciplinary topics and researchers. INDUSTRY LEADERS - This publication includes information regarding specific facilities, labs, and research areas of departments and schools as well as individual faculty members and researchers. A comprehensive index can be found at the back of this publication to help guide you by specific areas of interest, as well as point out interdisciplinary topics and researchers

Optically Powered Highly Energy-efficient Sensor Networks

In optically powered networks, both, communication signals and power for remotely located sensor nodes, are transmitted over an optical fiber. Key features of optically powered networks are node operation without local power supplies or batteries as well as operation with negligible susceptibility to electro-magnetic interference and to lightning. In this book, different kinds of optically powered devices and networks are investigated, and selected applications are demonstrated

Development of a light-powered microstructure : enhancing thermal actuation with near-infrared absorbent gold nanoparticles.

Development of microscale actuating technologies has considerably added to the toolset for interacting with natural components at the cellular level. Small-scale actuators and switches have potential in areas such as microscale pumping and particle manipulation. Thermal actuation has been used with asymmetric geometry to create large deflections with high force relative to electrostatically driven systems. However, many thermally based techniques require a physical connection for power and operate outside the temperature range conducive for biological studies and medical applications. The work presented here describes the design of an out-of-plane bistable switch that responds to near-infrared light with wavelength-specific response. In contrast to thermal actuating principles that require wired conductive components for Joule heating, the devices shown here are wirelessly powered by near -infrared (IR) light by patterning a wavelength-specific absorbent gold nanoparticle (GNP) film onto the microstructure. An optical window exists which allows near-IR wavelength light to permeate living tissue, and high stress mismatch in the bilayer geometry allows for large actuation at biologically acceptable limits. Patterning the GNP film will allow thermal gradients to be created from a single laser source, and integration of various target wavelengths will allow for microelectromechanical (MEMS) devices with multiple operating modes. An optically induced temperature gradient using wavelength-selective printable or spinnable coatings would provide a versatile method of wireless and non-invasive thermal actuation. This project aims to provide a fundamental understanding of the particle and surface interaction for bioengineering applications based on a “hybrid” of infrared resonant gold nanoparticles and MEMS structures. This hybrid technology has potential applications in light-actuated switches and other mechanical structures. Deposition methods and surface chemistry are integrated with three-dimensional MEMS structures in this work. The long-term goal of this project is a system of light-powered microactuators for exploring cells\u27 response to mechanical stimuli, adding to the fundamental understanding of tissue response to everyday mechanical stresses at the molecular level

Concept, modeling and experimental characterization of the modulated friction inertial drive (MFID) locomotion principle:application to mobile microrobots

A mobile microrobot is defined as a robot with a size ranging from 1 in3 down to 100 µm3 and a motion range of at least several times the robot's length. Mobile microrobots have a great potential for a wide range of mid-term and long-term applications such as minimally invasive surgery, inspection, surveillance, monitoring and interaction with the microscale world. A systematic study of the state of the art of locomotion for mobile microrobots shows that there is a need for efficient locomotion solutions for mobile microrobots featuring several degrees of freedom (DOF). This thesis proposes and studies a new locomotion concept based on stepping motion considering a decoupling of the two essential functions of a locomotion principle: slip generation and slip variation. The proposed "Modulated Friction Inertial Drive" (MFID) principle is defined as a stepping locomotion principle in which slip is generated by the inertial effect of a symmetric, axial vibration, while the slip variation is obtained from an active modulation of the friction force. The decoupling of slip generation and slip variation also has lead to the introduction of the concept of a combination of on-board and off-board actuation. This concept allows for an optimal trade-off between robot simplicity and power consumption on the one hand and on-board motion control on the other hand. The stepping motion of a MFID actuator is studied in detail by means of simulation of a numeric model and experimental characterization of a linear MFID actuator. The experimental setup is driven by piezoelectric actuators that vibrate in axial direction in order to generate slip and in perpendicular direction in order to vary the contact force. After identification of the friction parameters a good match between simulation and experimental results is achieved. MFID motion velocity has shown to depend sinusoidally on the phase shift between axial and perpendicular vibration. Motion velocity also increases linearly with increasing vibration amplitudes and driving frequency. Two parameters characterizing the MFID stepping behavior have been introduced. The step efficiency ηstep expresses the efficiency with which the actuator is capable of transforming the axial vibration in net motion. The force ratio qF evaluates the ease with which slip is generated by comparing the maximum inertial force in axial direction to the minimum friction force. The suitability of the MFID principle for mobile microrobot locomotion has been demonstrated by the development and characterization of three locomotion modules with between 2 and 3 DOF. The microrobot prototypes are driven by piezoelectric and electrostatic comb drive actuators and feature a characteristic body length between 20 mm and 10 mm. Characterization results include fast locomotion velocities up to 3 mm/s for typical driving voltages of some tens of volts and driving frequencies ranging from some tens of Hz up to some kHz. Moreover, motion resolutions in the nanometer range and very low power consumption of some tens of µW have been demonstrated. The advantage of the concept of a combination of on-board and off-board actuation has been demonstrated by the on-board simplicity of two of the three prototypes. The prototypes have also demonstrated the major advantage of the MFID principle: resonance operation has shown to reduce the power consumption, reduce the driving voltage and allow for simple driving electronics. Finally, with the fabrication of 2 × 2 mm2 locomotion modules with 2 DOF, a first step towards the development of mm-sized mobile microrobots with on-board motion control is made

Design of an Autonomous Quadrotor UAV for Urban Search and Rescue

Abstract This project entailed design and testing of an indoor quadrotor UAV capable of autonomous take-off, landing, and path finding. The propulsion system produces 1500g of thrust at 46% throttle using 7 propellers, minimizing craft size, but allowing for sufficient payload to carry a LIDAR, a CMOS camera, and rangefinders. These sensors are interfaced to an Overo processor, which sends high-level commands to a low-level flight controller, the HoverflyPro. Flight tests were conducted which demonstrated flight control and sensor operation