299 research outputs found

    High density circuit technology

    Get PDF
    Acquisition of polyimide materials for inter-metal dielectrics was obtained from three vendors, with considerable evaluation conducted on the Dupont PI2550 material. Experimental results indicate this material can be patterned using contact printing to line width far below 0.1 mils. Optimum line width is acquired using plasma etch equipment. Metal lift-off experiments on thermal evaporated films were optimized for application to sputtered deposited films. Alternate metal-lift-off experiments are proposed for future investigation. Dry processing equipment studies and future trends in VLSI fabrication techniques are on-going

    Research on Cognitive Radio within the Freeband-AAF project

    Get PDF

    Domain specific high performance reconfigurable architecture for a communication platform

    Get PDF

    Medium Access Control Layer Implementation on Field Programmable Gate Array Board for Wireless Networks

    Get PDF
    Triple play services are playing an important role in modern telecommunications systems. Nowadays, more researchers are engaged in investigating the most efficient approaches to integrate these services at a reduced level of operation costs. Field Programmable Gate Array (FPGA) boards have been found as the most suitable platform to test new protocols as they offer high levels of flexibility and customization. This thesis focuses on implementing a framework for the Triple Play Time Division Multiple Access (TP-TDMA) protocol using the Xilinx FPGA Virtex-5 board. This flexible framework design offers network systems engineers a reconfigiirable platform for triple-play systems development. In this work, MicorBlaze is used to perform memory and connectivity tests aiming to ensure the establishment of the connectivity as well as board’s processor stability. Two different approaches are followed to achieve TP-TDMA implementa­tion: systematic and conceptual. In the systematic approach, a bottom-to-top design is chosen where four subsystems are built with various components. Each component is then tested individually to investigate its response. On the other hand, the concep­tual approach is designed with only two components, in which one of them is created with the help of Xilinx Integrated Software Environment (ISE) Core Generator. The system is integrated and then tested to check its overall response. In summary, the work of this thesis is divided into three sections. The first section presents a testing method for Virtex-5 board using MicroBlaze soft processor. The following two sections concentrate on implementing the TP-TDMA protocol on the board by using two design approaches: one based on designing each component from scratch, while the other one focuses more on the system’s broader picture

    Proceedings of the Mobile Satellite Conference

    Get PDF
    A satellite-based mobile communications system provides voice and data communications to mobile users over a vast geographic area. The technical and service characteristics of mobile satellite systems (MSSs) are presented and form an in-depth view of the current MSS status at the system and subsystem levels. Major emphasis is placed on developments, current and future, in the following critical MSS technology areas: vehicle antennas, networking, modulation and coding, speech compression, channel characterization, space segment technology and MSS experiments. Also, the mobile satellite communications needs of government agencies are addressed, as is the MSS potential to fulfill them

    Protocol stacks for power-aware wireless microsensor networks

    Get PDF
    Thesis (M.Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2002.Includes bibliographical references (p. 71-72).In a distributed wireless sensor system, a need to prolong the lifetime of the network is crucial and limited by battery capacity. As communication traffic among sensor nodes is triggered by sensing events, the network can exploit these time-varying scenarios to obtain power savings by adjusting its operating conditions accordingly. A coherent design of application-specific network protocol stacks is the key. Specifically, embedding power aware features in the link layer and media access control (MAC) layer promises to extend the lifetime of the sensor network. The power-aware design will be illustrated on [mu]AMPS sensor node prototypes. With the integrated design framework, lower layers of the network stack provides configurable power-aware features to be controlled by higher network layers that maintain broaderview knowledge of the environment. TDMA has been chosen as a MAC Layer protocol for its inherited power-aware mechanism of radio shutdowns outside its TDMA slot and in absence of sensing events. Another level of power-aware features can be deployed in MAC ID and TDMA slot assignments. In a field of scattered sensor nodes, not all the nodes are in radio range of one another or of the base station. Hence, assigning N TDMA slots for the network of N sensor nodes that are not all in radio range will waste the receiver energy and link bandwidth. An algorithm for a re-use of MAC ID and MAC time slot is proposed based on the number of neighboring nodes. Hence, varying the number of neighboring nodes by varying the transmit power can optimize the system lifetime and bandwidth. An implementation of the Link and MAC infrastructure is completed. Power scalability is illustrated on [mu]AMPS node prototypes, with TDMA Media Access and a vehicle tracking application demonstration.by Phanaphat Piyada.M.Eng

    Validation platform specification – D5.1

    Get PDF
    Deliverable D5.1 del projecte Europeu OneFIT (ICT-2009-257385)The present deliverable introduces the OneFIT Proof-of-Concept (PoC) Architecture which will be used as a basis for the validation platform development throughout the project. This PoC Architecture proposal is validated by identifying the roles of the various components in the framework of the OneFIT Scenarios as derived and detailed in WP2. The applied methodology ensures that all required features are appropriately considered. Furthermore, the hardware components available to the project are detailed which are the basis for the development of an integrated validation platform. Their role is highlighted by an instantiation step which maps the PoC Architecture components to the identified hardware components. Finally, a scenario instantiation is derived which illustrates the role of the various hardware components for the validation of selected OneFIT scenarios.Postprint (published version

    Field Programmable Gate Arrays (FPGAs) II

    Get PDF
    This Edited Volume Field Programmable Gate Arrays (FPGAs) II is a collection of reviewed and relevant research chapters, offering a comprehensive overview of recent developments in the field of Computer and Information Science. The book comprises single chapters authored by various researchers and edited by an expert active in the Computer and Information Science research area. All chapters are complete in itself but united under a common research study topic. This publication aims at providing a thorough overview of the latest research efforts by international authors on Computer and Information Science, and open new possible research paths for further novel developments

    Unified Framework for Multicarrier and Multiple Access based on Generalized Frequency Division Multiplexing

    Get PDF
    The advancements in wireless communications are the key-enablers of new applications with stringent requirements in low-latency, ultra-reliability, high data rate, high mobility, and massive connectivity. Diverse types of devices, ranging from tiny sensors to vehicles, with different capabilities need to be connected under various channel conditions. Thus, modern connectivity and network techniques at all layers are essential to overcome these challenges. In particular, the physical layer (PHY) transmission is required to achieve certain link reliability, data rate, and latency. In modern digital communications systems, the transmission is performed by means of a digital signal processing module that derives analog hardware. The performance of the analog part is influenced by the quality of the hardware and the baseband signal denoted as waveform. In most of the modern systems such as fifth generation (5G) and WiFi, orthogonal frequency division multiplexing (OFDM) is adopted as a favorite waveform due to its low-complexity advantages in terms of signal processing. However, OFDM requires strict requirements on hardware quality. Many devices are equipped with simplified analog hardware to reduce the cost. In this case, OFDM does not work properly as a result of its high peak-to-average power ratio (PAPR) and sensitivity to synchronization errors. To tackle these problems, many waveforms design have been recently proposed in the literature. Some of these designs are modified versions of OFDM or based on conventional single subcarrier. Moreover, multicarrier frameworks, such as generalized frequency division multiplexing (GFDM), have been proposed to realize varieties of conventional waveforms. Furthermore, recent studies show the potential of using non-conventional waveforms for increasing the link reliability with affordable complexity. Based on that, flexible waveforms and transmission techniques are necessary to adapt the system for different hardware and channel constraints in order to fulfill the applications requirements while optimizing the resources. The objective of this thesis is to provide a holistic view of waveforms and the related multiple access (MA) techniques to enable efficient study and evaluation of different approaches. First, the wireless communications system is reviewed with specific focus on the impact of hardware impairments and the wireless channel on the waveform design. Then, generalized model of waveforms and MA are presented highlighting various special cases. Finally, this work introduces low-complexity architectures for hardware implementation of flexible waveforms. Integrating such designs with software-defined radio (SDR) contributes to the development of practical real-time flexible PHY.:1 Introduction 1.1 Baseband transmission model 1.2 History of multicarrier systems 1.3 The state-of-the-art waveforms 1.4 Prior works related to GFDM 1.5 Objective and contributions 2 Fundamentals of Wireless Communications 2.1 Wireless communications system 2.2 RF transceiver 2.2.1 Digital-analogue conversion 2.2.2 QAM modulation 2.2.3 Effective channel 2.2.4 Hardware impairments 2.3 Waveform aspects 2.3.1 Single-carrier waveform 2.3.2 Multicarrier waveform 2.3.3 MIMO-Waveforms 2.3.4 Waveform performance metrics 2.4 Wireless Channel 2.4.1 Line-of-sight propagation 2.4.2 Multi path and fading process 2.4.3 General baseband statistical channel model 2.4.4 MIMO channel 2.5 Summary 3 Generic Block-based Waveforms 3.1 Block-based waveform formulation 3.1.1 Variable-rate multicarrier 3.1.2 General block-based multicarrier model 3.2 Waveform processing techniques 3.2.1 Linear and circular filtering 3.2.2 Windowing 3.3 Structured representation 3.3.1 Modulator 3.3.2 Demodulator 3.3.3 MIMO Waveform processing 3.4 Detection 3.4.1 Maximum-likelihood detection 3.4.2 Linear detection 3.4.3 Iterative Detection 3.4.4 Numerical example and insights 3.5 Summary 4 Generic Multiple Access Schemes 57 4.1 Basic multiple access and multiplexing schemes 4.1.1 Infrastructure network system model 4.1.2 Duplex schemes 4.1.3 Common multiplexing and multiple access schemes 4.2 General multicarrier-based multiple access 4.2.1 Design with fixed set of pulses 4.2.2 Computational model 4.2.3 Asynchronous multiple access 4.3 Summary 5 Time-Frequency Analyses of Multicarrier 5.1 General time-frequency representation 5.1.1 Block representation 5.1.2 Relation to Zak transform 5.2 Time-frequency spreading 5.3 Time-frequency block in LTV channel 5.3.1 Subcarrier and subsymbol numerology 5.3.2 Processing based on the time-domain signal 5.3.3 Processing based on the frequency-domain signal 5.3.4 Unified signal model 5.4 summary 6 Generalized waveforms based on time-frequency shifts 6.1 General time-frequency shift 6.1.1 Time-frequency shift design 6.1.2 Relation between the shifted pulses 6.2 Time-frequency shift in Gabor frame 6.2.1 Conventional GFDM 6.3 GFDM modulation 6.3.1 Filter bank representation 6.3.2 Block representation 6.3.3 GFDM matrix structure 6.3.4 GFDM demodulator 6.3.5 Alternative interpretation of GFDM 6.3.6 Orthogonal modulation and GFDM spreading 6.4 Summary 7 Modulation Framework: Architectures and Applications 7.1 Modem architectures 7.1.1 General modulation matrix structure 7.1.2 Run-time flexibility 7.1.3 Generic GFDM-based architecture 7.1.4 Flexible parallel multiplications architecture 7.1.5 MIMO waveform architecture 7.2 Extended GFDM framework 7.2.1 Architectures complexity and flexibility analysis 7.2.2 Number of multiplications 7.2.3 Hardware analysis 7.3 Applications of the extended GFDM framework 7.3.1 Generalized FDMA 7.3.2 Enchantment of OFDM system 7.4 Summary 7 Conclusions and Future work
    • …
    corecore