1,357 research outputs found

    Natural and Technological Hazards in Urban Areas

    Get PDF
    Natural hazard events and technological accidents are separate causes of environmental impacts. Natural hazards are physical phenomena active in geological times, whereas technological hazards result from actions or facilities created by humans. In our time, combined natural and man-made hazards have been induced. Overpopulation and urban development in areas prone to natural hazards increase the impact of natural disasters worldwide. Additionally, urban areas are frequently characterized by intense industrial activity and rapid, poorly planned growth that threatens the environment and degrades the quality of life. Therefore, proper urban planning is crucial to minimize fatalities and reduce the environmental and economic impacts that accompany both natural and technological hazardous events

    Emerging Approaches for THz Array Imaging: A Tutorial Review and Software Tool

    Full text link
    Accelerated by the increasing attention drawn by 5G, 6G, and Internet of Things applications, communication and sensing technologies have rapidly evolved from millimeter-wave (mmWave) to terahertz (THz) in recent years. Enabled by significant advancements in electromagnetic (EM) hardware, mmWave and THz frequency regimes spanning 30 GHz to 300 GHz and 300 GHz to 3000 GHz, respectively, can be employed for a host of applications. The main feature of THz systems is high-bandwidth transmission, enabling ultra-high-resolution imaging and high-throughput communications; however, challenges in both the hardware and algorithmic arenas remain for the ubiquitous adoption of THz technology. Spectra comprising mmWave and THz frequencies are well-suited for synthetic aperture radar (SAR) imaging at sub-millimeter resolutions for a wide spectrum of tasks like material characterization and nondestructive testing (NDT). This article provides a tutorial review of systems and algorithms for THz SAR in the near-field with an emphasis on emerging algorithms that combine signal processing and machine learning techniques. As part of this study, an overview of classical and data-driven THz SAR algorithms is provided, focusing on object detection for security applications and SAR image super-resolution. We also discuss relevant issues, challenges, and future research directions for emerging algorithms and THz SAR, including standardization of system and algorithm benchmarking, adoption of state-of-the-art deep learning techniques, signal processing-optimized machine learning, and hybrid data-driven signal processing algorithms...Comment: Submitted to Proceedings of IEE

    Beam scanning by liquid-crystal biasing in a modified SIW structure

    Get PDF
    A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium

    Numerical Studies on Folds and related Deformation Structures in Anisotropic Viscous Materials undergoing Ductile Deformation

    Get PDF
    Folds are common structures in deformed rocks and ice sheets from the microscale to lithospheric scale. This thesis present numerical studies on folds and related deformation structures in anisotropic viscous materials undergoing ductile deformation with various boundary conditions. Mechanical anisotropy considered her is due to a crystallographic preferred orientation (CPO), for example by of alignment of micas or the basal planes of ice crystals. The modelling aims to numerically better understand the various fold geometries that are observed in natural rocks or ice drill cores. This thesis covers two main topics: (i) the influence of an initial CPO and intensity of anisotropy on resulting crenulation geometries in a single-phase material that deforms in moderate strain in dextral simple shear deformation, and (ii) the influence of an initial CPO, intensity of anisotropy and viscosities on evolving fold geometries of single-phase or poly-phase materials that deform in layer-parallel pure shear. The modelling is performed with the Viscoplastic Full-Field Transform (VPFFT) crystal plasticity code coupled with the two-dimensional platform modelling platform Elle. Mechanical anisotropy can enhance shear localisation and redistribute the strain, resulting in localised shear domains with strain concentration and low-strain domains in between. This strain localisation dominates the formation of structures in anisotropic materials and is visualised by foliated layers or foliations. The fold and crenulation geometries displayed in this thesis are made by systematically varying (i) the initial orientation of the anisotropy (CPO), (ii) the intensity of anisotropy, and (iii) the viscous property differences of materials. In simple shear with a CPO in the stretching field from the beginning, three types of localisation behaviour are synthetic shear localisation, antithetic shear localisation and distributed localisation. However, the resulting visible crenulation geometries are very varied and include ‘S-C’ structure (C & C’ bands), ‘anti S-C’ structure (C’’ bands), or mixes of both, or even in some cases no crenulation at all. This highlights that crenulation geometries are primarily due to the strong mechanical anisotropy of rocks. Mechanical anisotropy also affects layer-parallel pure shear shortening simulations. Here we observe two end-member geometries: The first is buckle folding and thickening of a competent layer similar to classical Biot-type buckle folds. An axial planar crenulation cleavage forms in the anisotropic matrix. In the absence of a competent layer, folds in the anisotropic matrix are self-similar with no characteristic length scale. This is observed in polar ice sheets. In this case it was also observed that fold amplification ceased after some strain, due to the rotation of the CPO. This confirms the hypothesis proposed for the shear margins of the Northeast Greenland Ice Stream (NEGIS), where fold amplification ceased about 2000 a BP. The second end member is layer-extension folding with strong amplification of fold amplitudes due to the formation of conjugate, localised bands in the matrix. Other geometries are in between

    Multipath assisted positioning using machine learning

    Get PDF
    The multipath propagation of the radio signal was considered a problem for positioning systems that had to be eliminated. However, a groundbreaking new approach called multipath assisted positioning caused a paradigm shift, where multipath propagation improves the positioning performance. Moreover, the multipath assisted positioning algorithm called Channel-SLAM shows the possibility of using a single physical transmitter in a multipath environment for positioning. In this thesis, I open a discussion on some problems that have vital importance for multipath assisted positioning algorithms with a focus on pedestrian positioning. Using the idea of multipath assisted positioning, I present a single frequency network positioning algorithm. I evaluated the single frequency network-based positioning algorithm for positioning in a real scenario using a terrestrial digital video broadcasting transmission. I propose a novel pedestrian transition model utilizing the inertial measurements from a handheld inertial measurement unit. The proposed pedestrian transition model improves the precision and reliability of the Channel-SLAM. Comparing the proposed transition model with the Rician transition model previously used in Channel-SLAM quantifies the performance improvement. This thesis proposes a joint data association technique that overcomes the strong dependence on the radio channel estimation algorithm used in Channel-SLAM. The joint data association allows reusing the previously observed virtual transmitters after an outage of multipath component tracking. The evaluation based on the walking pedestrian scenario shows that the joint data association algorithm provides superior positioning precision. The virtual transmitter position estimation yields a significant computational load in Channel-SLAM. I propose a method that represents the virtual transmitter by a Gaussian mixture model and learns its parameters. The evaluation shows that the proposed method outperforms the previous approach while decreasing the computational load. Also, the current methods for radio channel estimation yield a considerable computational load that prohibits a real-time deployment. The thesis investigates the possibility of using artificial neural networks trained to estimate the number of multipath components and corresponding delays in a noisy measurement of a channel impulse response. The artificial neural network-based delay estimator provides a superresolution performance and faster runtime than the classical approaches. The precision of the trained artificial neural network architecture is evaluated and compared to the Cramer-Rao lower bound theoretical limit and classical channel estimation algorithms

    Ultra-Wideband Technology: Characteristcs, Applications and Challenges

    Full text link
    Ultra-wideband (UWB) technology is a wireless communication technology designed for short-range applications. It is characterized by its ability to generate and transmit radio-frequency energy over an extensive frequency range. This paper provides an overview of UWB technology including its definition, two representative schemes and some key characteristics distinguished from other types of communication. Besides, this paper also analyses some widely used applications of UWB technology and highlights some of the challenges associated with implementing UWB in real-world scenarios. Furthermore, this paper expands upon UWB technology to encompass terahertz technology, providing an overview of the current status of terahertz communication, and conducting an analysis of the advantages, challenges, and certain corresponding solutions pertaining to ultra-wideband THz communication

    On the Road to 6G: Visions, Requirements, Key Technologies and Testbeds

    Get PDF
    Fifth generation (5G) mobile communication systems have entered the stage of commercial development, providing users with new services and improved user experiences as well as offering a host of novel opportunities to various industries. However, 5G still faces many challenges. To address these challenges, international industrial, academic, and standards organizations have commenced research on sixth generation (6G) wireless communication systems. A series of white papers and survey papers have been published, which aim to define 6G in terms of requirements, application scenarios, key technologies, etc. Although ITU-R has been working on the 6G vision and it is expected to reach a consensus on what 6G will be by mid-2023, the related global discussions are still wide open and the existing literature has identified numerous open issues. This paper first provides a comprehensive portrayal of the 6G vision, technical requirements, and application scenarios, covering the current common understanding of 6G. Then, a critical appraisal of the 6G network architecture and key technologies is presented. Furthermore, existing testbeds and advanced 6G verification platforms are detailed for the first time. In addition, future research directions and open challenges are identified for stimulating the on-going global debate. Finally, lessons learned to date concerning 6G networks are discussed

    Antenna System Design for 5G and Beyond – A Modal Approach

    Get PDF
    Antennas are one of the key components that empower a new generation of wireless technologies, such as 5G and new radar systems. It has been shown that antenna design strategies based on modal theories represent a powerful systematic approach to design practical antenna systems with high performance. In this thesis, several innovative multi-antenna systems are proposed for wireless applications in different frequency bands: from sub-6 GHz to millimeter-wave (mm-wave) bands. The thesis consists of an overview (Part I) and six scientific papers published in peer-reviewed international journals (Part II). Part I provides the overall framework of the thesis work: It presents the background and motivation for the problems at hand, the fundamental modal theories utilized to address these problems, as well as subject-specific research challenges. Brief conclusions and future outlook are also provided. The included papers of Part II can be divided into two tracks with different 5G and beyond wireless applications, both aiming for higher data rates.In the first track, Papers [I] to [IV] investigate different aspects of antenna system design for smart-phone application. Since Long Term Evolution (LTE) (so-called 3.5G) was deployed in 2009, mobile communication systems have utilized multiple-input multiple-output antenna technology (MIMO) technology to increase the spectral efficiency of the transmission channel and provide higher data rates in existing and new sub-6 GHz bands. However, MIMO requires multi-antennas at both the base stations and the user equipment (mainly smartphones) and it is very challenging to implement sub-6 GHz multi-antennas within the limited space of smartphones. This points to the need for innovative design strategies. The theory of characteristic modes (TCM) is one type of modal theory in the antenna community, which has been shown to be a versatile tool to analyze the inherent resonance properties of an arbitrarily shaped radiating structure. Characteristic modes (CMs) have the useful property of their fields being orthogonal over both the source region and the sphere at infinity. This property makes TCM uniquely suited for electrically compact MIMO antenna design.In the second track, Papers [V]-[VI] investigate new integrated antenna arrays and subarrays for the two wireless applications, which are both implemented in a higher part of the mm-wave frequency range (i.e. E-band). Furthermore, a newly developed high resolution multi-layer “Any-Layer” PCB technology is investigated to realize antenna-in-package solutions for these mmwave antenna system designs. High gain and high efficiency antennas are essential for high-speed wireless point-to-point communication systems. To meet these requirements, Paper [V] proposes directive multilayer substrate integrated waveguide (SIW) cavity-backed slot antenna array and subarray. As a background, the microwave community has already shown the benefits of modal theory in the design and analysis of closed structures like waveguides and cavities. Higher-order cavity modes are used in the antenna array design process to facilitate lower loss, simpler feeding network, and lower sensitivity to fabrication errors, which are favorable for E-band communication systems. However, waveguide/cavity modes are confined to fields within the guided media and can only help to design special types of antennas that contain those structures. As an example of the versatility of TCM, Paper [VI] shows that apart from smartphone antenna designs proposed in Papers [I]-[IV], TCM can alsobe used to find the desirable modes of the linear antenna arrays. Furthermore, apart from E-band communications, the proposed series-fed patch array topology in Paper [VI] is a good candidate for application in 79 GHz MIMO automotive radar due to its low cost, compact size, ability to suppress surface waves, as well as relatively wide impedance and flat-gain bandwidths

    Selected Papers from 2020 IEEE International Conference on High Voltage Engineering (ICHVE 2020)

    Get PDF
    The 2020 IEEE International Conference on High Voltage Engineering (ICHVE 2020) was held on 6–10 September 2020 in Beijing, China. The conference was organized by the Tsinghua University, China, and endorsed by the IEEE Dielectrics and Electrical Insulation Society. This conference has attracted a great deal of attention from researchers around the world in the field of high voltage engineering. The forum offered the opportunity to present the latest developments and different emerging challenges in high voltage engineering, including the topics of ultra-high voltage, smart grids, and insulating materials
    corecore