Power Efficient Data-Aware SRAM Cell for SRAM-Based FPGA Architecture

The design of low-power SRAM cell becomes a necessity in today\u27s FPGAs, because SRAM is a critical component in FPGA design and consumes a large fraction of the total power. The present chapter provides an overview of various factors responsible for power consumption in FPGA and discusses the design techniques of low-power SRAM-based FPGA at system level, device level, and architecture levels. Finally, the chapter proposes a data-aware dynamic SRAM cell to control the power consumption in the cell. Stack effect has been adopted in the design to reduce the leakage current. The various peripheral circuits like address decoder circuit, write/read enable circuits, and sense amplifier have been modified to implement a power-efficient SRAM-based FPGA

Low Leakage and PDP Optimized FinFET based 8T SRAM Design

The paper proposes a Fin Field Effect Transistors (FinFETs) based SRAM design comprising of 8 transistors. The circuit utilizes channel length of 22 nanometers. The operation of this circuit is dependent upon the control switch CS that decides the operating mode and minimizes the leakage current flowing in the cell which in turn lowers the leakage power to a minimal value of 0.331pW. The read buffer available in the design provides a different path for read mode and also enhances the Read Static Noise Margin (RSNM), thus enhancing the readability of the circuit.This design is also able to operate at a minimal voltage of 70mV, thus efficiently utilizing the power available. It also optimizes the power delay product (PDP) for both read and write operations

Design and Analysis of Optimized Fin-FETs

Semiconductor industry greatly depends on CMOS technology and now needs competent technology with handful benefits. This paper examines and analyzes the modern FINFET technology. This analysis is performed through 9 stages Ring Oscillator equipped with FINFET. Performance is analyzed by comparing the proposed structure with CMOS based 9 stage Ring Oscillator at the nano-scale level of abstraction

Variability analysis of FinFET AC/RF performances through efficient physics-based simulations for the optimization of RF CMOS stages

A nearly insatiable appetite for the latest electronic device enables the electronic technology sector to maintain research momentum. The necessity for advancement with miniaturization of electronic devices is the need of the day. Aggressive downscaling of electronic devices face some fundamental limits and thus, buoy up the change in device geometry. MOSFETs have been the leading contender in the electronics industry for years, but the dire need for miniaturization is forcing MOSFET to be scaled to nano-scale and in sub-50 nm scale. Short channel effects (SCE) become dominant and adversely affect the performance of the MOSFET. So, the need for a novel structure was felt to suppress SCE to an acceptable level. Among the proposed devices, FinFETs (Fin Field Effect Transistors) were found to be most effective to counter-act SCE in electronic devices. Today, many industries are working on electronic circuits with FinFETs as their primary element.One of limitation which FinFET faces is device variability. The purpose of this work was to study the effect that different sources of parameter fluctuations have on the behavior and characteristics of FinFETs. With deep literature review, we have gained insight into key sources of variability. Different sources of variations, like random dopant fluctuation, line edge roughness, fin variations, workfunction variations, oxide thickness variation, and source/drain doping variations, were studied and their impact on the performance of the device was studied as well. The adverse effect of these variations fosters the great amount of research towards variability modeling. A proper modeling of these variations is required to address the device performance metric before the fabrication of any new generation of the device on the commercial scale. The conventional methods to address the characteristics of a device under variability are Monte-Carlo-like techniques. In Monte Carlo analysis, all process parameters can be varied individually or simultaneously in a more realistic approach. The Monte Carlo algorithm takes a random value within the range of each process parameter and performs circuit simulations repeatedly. The statistical characteristics are estimated from the responses. This technique is accurate but requires high computational resources and time. Thus, efforts are being put by different research groups to find alternative tools. If the variations are small, Green’s Function (GF) approach can be seen as a breakthrough methodology. One of the most open research fields regards "Variability of FinFET AC performances". One reason for the limited AC variability investigations is the lack of commercially available efficient simulation tools, especially those based on accurate physics-based analysis: in fact, the only way to perform AC variability analysis through commercial TCAD tools like Synopsys Sentaurus is through the so-called Monte Carlo approach, that when variations are deterministic, is more properly referred to as incremental analysis, i.e., repeated solutions of the device model with varying physical parameters. For each selected parameter, the model must be solved first in DC operating condition (working point, WP) and then linearized around the WP, hence increasing severely the simulation time. In this work, instead, we used GF approach, using our in-house Simulator "POLITO", to perform AC variability analysis, provided that variations are small, alleviating the requirement of double linearization and reducing the simulation time significantly with a slight trade-off in accuracy. Using this tool we have, for the first time addressed the dependency of FinFET AC parameters on the most relevant process variations, opening the way to its application to RF circuits. This work is ultimately dedicated to the successful implementation of RF stages in commercial applications by incorporating variability effects and controlling the degradation of AC parameters due to variability. We exploited the POLITO (in-house simulator) limited to 2D structures, but this work can be extended to the variability analysis of 3D FinFET structure. Also variability analysis of III-V Group structures can be addressed. There is also potentiality to carry out the sensitivity analysis for the other source of variations, e.g., thermal variations

Design for Reliability and Low Power in Emerging Technologies

Die fortlaufende Verkleinerung von Transistor-Strukturgrößen ist einer der wichtigsten Antreiber für das Wachstum in der Halbleitertechnologiebranche. Seit Jahrzehnten erhöhen sich sowohl Integrationsdichte als auch Komplexität von Schaltkreisen und zeigen damit einen fortlaufenden Trend, der sich über alle modernen Fertigungsgrößen erstreckt. Bislang ging das Verkleinern von Transistoren mit einer Verringerung der Versorgungsspannung einher, was zu einer Reduktion der Leistungsaufnahme führte und damit eine gleichbleibenden Leistungsdichte sicherstellte. Doch mit dem Beginn von Strukturgrößen im Nanometerbreich verlangsamte sich die fortlaufende Skalierung. Viele Schwierigkeiten, sowie das Erreichen von physikalischen Grenzen in der Fertigung und Nicht-Idealitäten beim Skalieren der Versorgungsspannung, führten zu einer Zunahme der Leistungsdichte und, damit einhergehend, zu erschwerten Problemen bei der Sicherstellung der Zuverlässigkeit. Dazu zählen, unter anderem, Alterungseffekte in Transistoren sowie übermäßige Hitzeentwicklung, nicht zuletzt durch stärkeres Auftreten von Selbsterhitzungseffekten innerhalb der Transistoren. Damit solche Probleme die Zuverlässigkeit eines Schaltkreises nicht gefährden, werden die internen Signallaufzeiten üblicherweise sehr pessimistisch kalkuliert. Durch den so entstandenen zeitlichen Sicherheitsabstand wird die korrekte Funktionalität des Schaltkreises sichergestellt, allerdings auf Kosten der Performance. Alternativ kann die Zuverlässigkeit des Schaltkreises auch durch andere Techniken erhöht werden, wie zum Beispiel durch Null-Temperatur-Koeffizienten oder Approximate Computing. Wenngleich diese Techniken einen Großteil des üblichen zeitlichen Sicherheitsabstandes einsparen können, bergen sie dennoch weitere Konsequenzen und Kompromisse. Bleibende Herausforderungen bei der Skalierung von CMOS Technologien führen außerdem zu einem verstärkten Fokus auf vielversprechende Zukunftstechnologien. Ein Beispiel dafür ist der Negative Capacitance Field-Effect Transistor (NCFET), der eine beachtenswerte Leistungssteigerung gegenüber herkömmlichen FinFET Transistoren aufweist und diese in Zukunft ersetzen könnte. Des Weiteren setzen Entwickler von Schaltkreisen vermehrt auf komplexe, parallele Strukturen statt auf höhere Taktfrequenzen. Diese komplexen Modelle benötigen moderne Power-Management Techniken in allen Aspekten des Designs. Mit dem Auftreten von neuartigen Transistortechnologien (wie zum Beispiel NCFET) müssen diese Power-Management Techniken neu bewertet werden, da sich Abhängigkeiten und Verhältnismäßigkeiten ändern. Diese Arbeit präsentiert neue Herangehensweisen, sowohl zur Analyse als auch zur Modellierung der Zuverlässigkeit von Schaltkreisen, um zuvor genannte Herausforderungen auf mehreren Designebenen anzugehen. Diese Herangehensweisen unterteilen sich in konventionelle Techniken ((a), (b), (c) und (d)) und unkonventionelle Techniken ((e) und (f)), wie folgt: $\textbf{(a)}$ Analyse von Leistungszunahmen in Zusammenhang mit der Maximierung von Leistungseffizienz beim Betrieb nahe der Transistor Schwellspannung, insbesondere am optimalen Leistungspunkt. Das genaue Ermitteln eines solchen optimalen Leistungspunkts ist eine besondere Herausforderung bei Multicore Designs, da dieser sich mit den jeweiligen Optimierungszielsetzungen und der Arbeitsbelastung verschiebt. $\textbf{(b)}$ Aufzeigen versteckter Interdependenzen zwischen Alterungseffekten bei Transistoren und Schwankungen in der Versorgungsspannung durch „IR-drops“. Eine neuartige Technik wird vorgestellt, die sowohl Über- als auch Unterschätzungen bei der Ermittlung des zeitlichen Sicherheitsabstands vermeidet und folglich den kleinsten, dennoch ausreichenden Sicherheitsabstand ermittelt. $\textbf{(c)}$ Eindämmung von Alterungseffekten bei Transistoren durch „Graceful Approximation“, eine Technik zur Erhöhung der Taktfrequenz bei Bedarf. Der durch Alterungseffekte bedingte zeitlich Sicherheitsabstand wird durch Approximate Computing Techniken ersetzt. Des Weiteren wird Quantisierung verwendet um ausreichend Genauigkeit bei den Berechnungen zu gewährleisten. $\textbf{(d)}$ Eindämmung von temperaturabhängigen Verschlechterungen der Signallaufzeit durch den Betrieb nahe des Null-Temperatur Koeffizienten (N-ZTC). Der Betrieb bei N-ZTC minimiert temperaturbedingte Abweichungen der Performance und der Leistungsaufnahme. Qualitative und quantitative Vergleiche gegenüber dem traditionellen zeitlichen Sicherheitsabstand werden präsentiert. $\textbf{(e)}$ Modellierung von Power-Management Techniken für NCFET-basierte Prozessoren. Die NCFET Technologie hat einzigartige Eigenschaften, durch die herkömmliche Verfahren zur Spannungs- und Frequenzskalierungen zur Laufzeit (DVS/DVFS) suboptimale Ergebnisse erzielen. Dies erfordert NCFET-spezifische Power-Management Techniken, die in dieser Arbeit vorgestellt werden. $\textbf{(f)}$ Vorstellung eines neuartigen heterogenen Multicore Designs in NCFET Technologie. Das Design beinhaltet identische Kerne; Heterogenität entsteht durch die Anwendung der individuellen, optimalen Konfiguration der Kerne. Amdahls Gesetz wird erweitert, um neue system- und anwendungsspezifische Parameter abzudecken und die Vorzüge des neuen Designs aufzuzeigen. Die Auswertungen der vorgestellten Techniken werden mithilfe von Implementierungen und Simulationen auf Schaltkreisebene (gate-level) durchgeführt. Des Weiteren werden Simulatoren auf Systemebene (system-level) verwendet, um Multicore Designs zu implementieren und zu simulieren. Zur Validierung und Bewertung der Effektivität gegenüber dem Stand der Technik werden analytische, gate-level und system-level Simulationen herangezogen, die sowohl synthetische als auch reale Anwendungen betrachten

Cross-Layer Resiliency Modeling and Optimization: A Device to Circuit Approach

The never ending demand for higher performance and lower power consumption pushes the VLSI industry to further scale the technology down. However, further downscaling of technology at nano-scale leads to major challenges. Reduced reliability is one of them, arising from multiple sources e.g. runtime variations, process variation, and transient errors. The objective of this thesis is to tackle unreliability with a cross layer approach from device up to circuit level

Design and automation of voltage-scaled clock networks

In this dissertation, a vital step of VLSI physical design flow, synthesis of clock distribution networks, is investigated. Clock network synthesis (CNS) involves large and complex optimization problems to achieve high performance and low power demands of current integrated circuits (ICs). Ineffectiveness of existing methodologies to provide high performance at lower voltage nodes is the main driver for this dissertation research. A design and automation flow for voltage-scaled clock networks is proposed to satisfy tight timing constraints at high frequency (for high performance) and low voltage (for low power) operation. One implementation of voltage-scaled clock networks is low (voltage) swing clocking, which is a known technique, yet its applicability remains limited to designs with low performance demands. In this dissertation, novel methodologies are introduced to i) apply low swing clocking to legacy designs as a power saving methodology, ii) develop a complete CNS flow for low swing clocking of high performance ICs. These methodologies include slew-driven approaches that are better suited to future transistor and interconnect technologies. Second implementation of voltage-scaled clock networks is multi-voltage clocking, which is another known technique, yet its applicability remains limited to clock tree topology. In this dissertation, multi-voltage clocking with a clock mesh topology is investigated in order to address a missing aspect in the current IC design flows. Practical considerations of the current IC design flows are also investigated in this dissertation to expand the applicability of the proposed CNS flow. A novel methodology is introduced to facilitate clock gating within low swing clocking. The applicability of low swing clocking to FinFET technology, which is currently the industry norm, is shown to be effective.Ph.D., Electrical Engineering -- Drexel University, 201

Near-Threshold Computing: Past, Present, and Future.

Transistor threshold voltages have stagnated in recent years, deviating from constant-voltage scaling theory and directly limiting supply voltage scaling. To overcome the resulting energy and power dissipation barriers, energy efficiency can be improved through aggressive voltage scaling, and there has been increased interest in operating at near-threshold computing (NTC) supply voltages. In this region sizable energy gains are achieved with moderate performance loss, some of which can be regained through parallelism. This thesis first provides a methodical definition of how near to threshold is "near threshold" and continues with an in-depth examination of NTC across past, present, and future CMOS technologies. By systematically defining near-threshold, the trends and tradeoffs are analyzed, lending insight in how best to design and optimize near-threshold systems. NTC works best for technologies that feature good circuit delay scalability, therefore technologies without strong short-channel effects. Early planar technologies (prior to 90nm or so) featured good circuit scalability (8x energy gains), but lacked area in which to add cores for parallelization. Recent planar nodes (32nm – 20nm) feature more area for cores but suffer from poor delay scalability, and so are not well-suited for NTC (4x energy gains). The switch to FinFET CMOS technology allows for a return to strong voltage scalability (8x gain), reversing trends seen in planar technologies, while dark silicon has created an opportunity to add cores for parallelization. Improved FinFET voltage scalability even allows for latency reduction of a single task, as long as the task is sufficiently parallelizable (< 10% serial code). Finally, we will look at a technique for fast voltage boosting, called Shortstop, in which a core's operating voltage is raised in 10s of cycles. Shortstop can be used to quickly respond to single-threaded performance demands of a near-threshold system by leveraging the innate parasitic inductance of a dedicated dirty supply rail, further improving energy efficiency. The technique is demonstrated in a wirebond implementation and is able to boost a core up to 1.8x faster than a header-based approach, while reducing supply droop by 2-7x. An improved flip-chip architecture is also proposed.PhDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/113600/1/npfet_1.pd

A Construction Kit for Efficient Low Power Neural Network Accelerator Designs

Implementing embedded neural network processing at the edge requires efficient hardware acceleration that couples high computational performance with low power consumption. Driven by the rapid evolution of network architectures and their algorithmic features, accelerator designs are constantly updated and improved. To evaluate and compare hardware design choices, designers can refer to a myriad of accelerator implementations in the literature. Surveys provide an overview of these works but are often limited to system-level and benchmark-specific performance metrics, making it difficult to quantitatively compare the individual effect of each utilized optimization technique. This complicates the evaluation of optimizations for new accelerator designs, slowing-down the research progress. This work provides a survey of neural network accelerator optimization approaches that have been used in recent works and reports their individual effects on edge processing performance. It presents the list of optimizations and their quantitative effects as a construction kit, allowing to assess the design choices for each building block separately. Reported optimizations range from up to 10'000x memory savings to 33x energy reductions, providing chip designers an overview of design choices for implementing efficient low power neural network accelerators

EFFICIENT HARDWARE PRIMITIVES FOR SECURING LIGHTWEIGHT SYSTEMS

In the era of IoT and ubiquitous computing, the collection and communication of sensitive data is increasingly being handled by lightweight Integrated Circuits. Efficient hardware implementations of crytographic primitives for resource constrained applications have become critical, especially block ciphers which perform fundamental operations such as encryption, decryption, and even hashing. We study the efficiency of block ciphers under different implementation styles. For low latency applications that use unrolled block cipher implementations, we design a glitch filter to reduce energy consumption. For lightweight applications, we design a novel architecture for the widely used AES cipher. The design eliminates inefficiencies in data movement and clock activity, thereby significantly improving energy efficiency over state-of-the-art architectures. Apart from efficiency, vulnerability to implementation attacks are a concern, which we mitigate by our randomization capable lightweight AES architecture. We fabricate our designs in a commercial 16nm FinFET technology and present measured testchip data on energy consumption and side channel resistance. Finally, we address the problem of supply chain security by using image processing techniques to extract fingerprints from surface texture of plastic IC packages for IC authentication and counterfeit prevention. Collectively these works present efficient and cost effective solutions to secure lightweight systems