Rate-Splitting Robustness in Multi-Pair Massive MIMO Relay Systems

Relay systems improve both coverage and system capacity. Toward this direction, a full-duplex (FD) technology, being able to boost the spectral efficiency by transmitting and receiving simultaneously on the same frequency and time resources, is envisaged to play a key role in future networks. However, its benefits come at the expense of self-interference (SI) from their own transmit signal. At the same time, massive multiple-input massive multiple-output systems, bringing unconventionally many antennas, emerge as a promising technology with huge degrees-of-freedom. To this end, this paper considers a multi-pair decode-and-forward FD relay channel, where the relay station is deployed with a large number of antennas. Moreover, the rate-splitting (RS) transmission has recently been shown to provide significant performance benefits in various multi-user scenarios with imperfect channel state information at the transmitter (CSIT). Engaging the RS approach, we employ the deterministic equivalent analysis to derive the corresponding sum-rates in the presence of interferences. Initially, numerical results demonstrate the robustness of RS in half-duplex (HD) systems, since the achievable sum-rate increases without bound, i.e., it does not saturate at high signal-to-noise ratio. Next, we tackle the detrimental effect of SI in FD. In particular, and most importantly, not only FD outperforms HD, but also RS enables increasing the range of SI over which FD outperforms HD. Furthermore, increasing the number of relay station antennas, RS appears to be more efficacious due to imperfect CSIT, since SI decreases. Interestingly, increasing the number of users, the efficiency of RS worsens and its implementation becomes less favorable under these conditions. Finally, we verify that the proposed DEs, being accurate for a large number of relay station antennas, are tight approximations even for realistic system dimensions.Peer reviewedFinal Accepted Versio

Multipair Two-Way DF Relaying with Cell-Free Massive MIMO

We consider a two-way half-duplex decode-and-forward (DF) relaying system with multiple pairs of single-antenna users assisted by a cell-free (CF) massive multiple-input multiple-output (mMIMO) architecture with multiple-antenna access points (APs). Under the practical constraint of imperfect channel state information (CSI), we derive the achievable sum spectral efficiency (SE) for a finite number of APs with maximum ratio (MR) linear processing for both reception and transmission in closed-form. Notably, the proposed CF mMIMO relaying architecture, exploiting the spatial diversity, and providing better coverage, outperforms the conventional collocated mMIMO deployment. Moreover, we shed light on the power-scaling laws maintaining a specific SE as the number of APs grows. A thorough examination of the interplay between the transmit powers per pilot symbol and user/APs takes place, and useful conclusions are extracted. Finally, differently to the common approach for power control in CF mMIMO systems, we design a power allocation scheme maximizing the sum SE.Comment: 15 pages, 8 figures, This work was accepted in IEEE Trans. Green Commun. Net. Copyright may be transferred without notice, after which this version may no longer be accessibl

Multipair Massive MIMO Relaying Systems with One-Bit ADCs and DACs

This paper considers a multipair amplify-and-forward massive MIMO relaying system with one-bit ADCs and one-bit DACs at the relay. The channel state information is estimated via pilot training, and then utilized by the relay to perform simple maximum-ratio combining/maximum-ratio transmission processing. Leveraging on the Bussgang decomposition, an exact achievable rate is derived for the system with correlated quantization noise. Based on this, a closed-form asymptotic approximation for the achievable rate is presented, thereby enabling efficient evaluation of the impact of key parameters on the system performance. Furthermore, power scaling laws are characterized to study the potential energy efficiency associated with deploying massive one-bit antenna arrays at the relay. In addition, a power allocation strategy is designed to compensate for the rate degradation caused by the coarse quantization. Our results suggest that the quality of the channel estimates depends on the specific orthogonal pilot sequences that are used, contrary to unquantized systems where any set of orthogonal pilot sequences gives the same result. Moreover, the sum rate gap between the double-quantized relay system and an ideal non-quantized system is a moderate factor of $4/\pi^2$ in the low power regime.Comment: 14 pages, 10 figures, submitted to IEEE Trans. Signal Processin

Ergodic Capacity Analysis of AF DH MIMO Relay Systems with Residual Transceiver Hardware Impairments : Conventional and Large System Limits

© 2017 IEEE Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.Despite the inevitable presence of transceiver impairments, most prior work on multiple-input multiple-output (MIMO) wireless systems assumes perfect transceiver hardware, which is unrealistic in practice. In this direction, motivated by the increasing interest in MIMO relay systems due to their improved spectral efficiency and coverage, this paper investigates the impact of residual hardware impairments on the ergodic capacity of dual-hop (DH) amplify-and-forward (AF) MIMO relay systems. Specifically, a thorough characterization of the ergodic channel capacity of DH AF relay systems in the presence of hardware impairments is presented herein for both the finite and large antenna regimes by employing results from finite-dimensional and large random matrix theory, respectively. Regarding the former setting, we derive the exact ergodic capacity as well as closed-form expressions for tight upper and lower bounds. Furthermore, we provide an insightful study for the low signal-to-noise ratio regimes. Next, the application of the free probability theory allows us to study the effects of the hardware impairments in future 5G deployments including a large number of antennas. While these results are obtained for the large system limit, simulations show that the asymptotic results are quite precise even for conventional system dimensions.Peer reviewedFinal Accepted Versio

Hardware-Conscious Wireless Communication System Design

The work at hand is a selection of topics in efficient wireless communication system design, with topics logically divided into two groups.One group can be described as hardware designs conscious of their possibilities and limitations. In other words, it is about hardware that chooses its configuration and properties depending on the performance that needs to be delivered and the influence of external factors, with the goal of keeping the energy consumption as low as possible. Design parameters that trade off power with complexity are identified for analog, mixed signal and digital circuits, and implications of these tradeoffs are analyzed in detail. An analog front end and an LDPC channel decoder that adapt their parameters to the environment (e.g. fluctuating power level due to fading) are proposed, and it is analyzed how much power/energy these environment-adaptive structures save compared to non-adaptive designs made for the worst-case scenario. Additionally, the impact of ADC bit resolution on the energy efficiency of a massive MIMO system is examined in detail, with the goal of finding bit resolutions that maximize the energy efficiency under various system setups.In another group of themes, one can recognize systems where the system architect was conscious of fundamental limitations stemming from hardware.Put in another way, in these designs there is no attempt of tweaking or tuning the hardware. On the contrary, system design is performed so as to work around an existing and unchangeable hardware limitation. As a workaround for the problematic centralized topology, a massive MIMO base station based on the daisy chain topology is proposed and a method for signal processing tailored to the daisy chain setup is designed. In another example, a large group of cooperating relays is split into several smaller groups, each cooperatively performing relaying independently of the others. As cooperation consumes resources (such as bandwidth), splitting the system into smaller, independent cooperative parts helps save resources and is again an example of a workaround for an inherent limitation.From the analyses performed in this thesis, promising observations about hardware consciousness can be made. Adapting the structure of a hardware block to the environment can bring massive savings in energy, and simple workarounds prove to perform almost as good as the inherently limited designs, but with the limitation being successfully bypassed. As a general observation, it can be concluded that hardware consciousness pays off

Energy Efficient Massive MIMO and Beamforming for 5G Communications

Massive multiple-input multiple-output (MIMO) has been a key technique in the next generation of wireless communications for its potential to achieve higher capacity and data rates. However, the exponential growth of data traffic has led to a significant increase in the power consumption and system complexity. Therefore, we propose and study wireless technologies to improve the trade-off between system performance and power consumption of wireless communications. This Thesis firstly proposes a strategy with partial channel state information (CSI) acquisition to reduce the power consumption and hardware complexity of massive MIMO base stations. In this context, the employment of partial CSI is proposed in correlated communication channels with user mobility. By exploiting both the spatial correlation and temporal correlation of the channel, our analytical results demonstrate significant gains in the energy efficiency of the massive MIMO base station. Moreover, relay-aided communications have experienced raising interest; especially, two-way relaying systems can improve spectral efficiency with short required operating time. Therefore, this Thesis focuses on an uncorrelated massive MIMO two-way relaying system and studies power scaling laws to investigate how the transmit powers can be scaled to improve the energy efficiency up to several times the energy efficiency without power scaling while approximately maintaining the system performance. In a similar line, large antenna arrays deployed at the space-constrained relay would give rise to the spatial correlation. For this reason, this Thesis presents an incomplete CSI scheme to evaluate the trade-off between the spatial correlation and system performance. In addition, the advantages of linear processing methods and the effects of channel aging are investigated to further improve the relay-aided system performance. Similarly, large antenna arrays are required in millimeter-wave communications to achieve narrow beams with higher power gain. This poses the problem that locating the best beam direction requires high power and complexity consumption. Therefore, this Thesis presents several low-complexity beam alignment methods with respect to the state-of-the-art to evaluate the trade-off between complexity and system performance. Overall, extensive analytical and numerical results show an improved performance and validate the effectiveness of the proposed techniques