Power Optimized Transceivers for Future Switched Networks

Network equipment power consumption is under increased scrutiny. To understand and decompose transceiver power consumption, we have created a toolkit incorporating a library of transceiver circuits in 45-nm CMOS and MOS current mode logic (MCML) and characterize power consumption using representative network traffic traces with digital synthesis and SPICE tools. Our toolkit includes all the components required to construct a library of different transceivers: line coding, frame alignment, channel bonding, serialization and deserialization, clock–data recovery, and clock generation. For optical transceivers, we show that photonic components and front end drivers only consume a small fraction (<22%) of total serial transceiver power. This implies that major reductions in optical transceiver power can only be obtained by paying attention to the physical layer circuits such as clock recovery and serial–parallel conversions. We propose a burst-mode physical layer protocol suitable for optically switched links that retains the beneficial transmission characteristics of 8b/10b, but, even without power gating and voltage controlled oscillator power optimization, reduces the power consumption during idle periods by 29% compared with a conventional 8b/10b transceiver. We have made the toolkit available to the community at large in the hope of stimulating work in this field

Benchmarking and viability assessment of optical packet switching for metro networks

Optical packet switching (OPS) has been proposed as a strong candidate for future metro networks. This paper assesses the viability of an OPS-based ring architecture as proposed within the research project DAVID (Data And Voice Integration on DWDM), funded by the European Commission through the Information Society Technologies (IST) framework. Its feasibility is discussed from a physical-layer point of view, and its limitations in size are explored. Through dimensioning studies, we show that the proposed OPS architecture is competitive with respect to alternative metropolitan area network (MAN) approaches, including synchronous digital hierarchy, resilient packet rings (RPR), and star-based Ethernet. Finally, the proposed OPS architectures are discussed from a logical performance point of view, and a high-quality scheduling algorithm to control the packet-switching operations in the rings is explained

Low-Power, High-Speed Transceivers for Network-on-Chip Communication

Networks on chips (NoCs) are becoming popular as they provide a solution for the interconnection problems on large integrated circuits (ICs). But even in a NoC, link-power can become unacceptably high and data rates are limited when conventional data transceivers are used. In this paper, we present a low-power, high-speed source-synchronous link transceiver which enables a factor 3.3 reduction in link power together with an 80% increase in data-rate. A low-swing capacitive pre-emphasis transmitter in combination with a double-tail sense-amplifier enable speeds in excess of 9 Gb/s over a 2 mm twisted differential interconnect, while consuming only 130 fJ/transition without the need for an additional supply. Multiple transceivers can be connected back-to-back to create a source-synchronous transceiver-chain with a wave-pipelined clock, operating with 6sigma offset reliability at 5 Gb/s

Energy-Efficient Design of Wavelength-Routing Networks

We discuss the power-aware Logical Topology Design problem in wavelength routing net- works, and analyze the economical impacts of power-efficiency. Results show that energy-optimized logical topologies can bring significant economical saving

Optically-Connected Memory: Architectures and Experimental Characterizations

Growing demands on future data centers and high-performance computing systems are driving the development of processor-memory interconnects with greater performance and flexibility than can be provided by existing electronic interconnects. A redesign of the systems' memory devices and architectures will be essential to enabling high-bandwidth, low-latency, resilient, energy-efficient memory systems that can meet the challenges of exascale systems and beyond. By leveraging an optics-based approach, this thesis presents the design and implementation of an optically-connected memory system that exploits both the bandwidth density and distance-independent energy dissipation of photonic transceivers, in combination with the flexibility and scalability offered by optical networks. By replacing the electronic memory bus with an optical interconnection network, novel memory architectures can be created that are otherwise infeasible. With remote optically-connected memory nodes accessible to processors as if they are local, programming models can be designed to utilize and efficiently share greater amounts of data. Processors that would otherwise be idle, being starved for data while waiting for scarce memory resources, can instead operate at high utilizations, leading to drastic improvements in the overall system performance. This work presents a prototype optically-connected memory module and a custom processor-based optical-network-aware memory controller that communicate transparently and all-optically across an optical interconnection network. The memory modules and controller are optimized to facilitate memory accesses across the optical network using a packet-switched, circuit-switched, or hybrid packet-and-circuit-switched approach. The novel memory controller is experimentally demonstrated to be compatible with existing processor-memory access protocols, with the memory controller acting as the optics-computing interface to render the optical network transparent. Additionally, the flexibility of the optical network enables additional performance benefits including increased memory bandwidth through optical multicasting. This optically-connected architecture can further enable more resilient memory system realizations by expanding on current error dectection and correction memory protocols. The integration of optics with memory technology constitutes a critical step for both optics and computing. The scalability challenges facing main memory systems today, especially concerning bandwidth and power consumption, complement well with the strengths of optical communications-based systems. Additionally, ongoing efforts focused on developing low-cost optical components and subsystems that are suitable for computing environments may benefit from the high-volume memory market. This work therefore takes the first step in merging the areas of optics and memory, developing the necessary architectures and protocols to interface the two technologies, and demonstrating potential benefits while identifying areas for future work. Future computing systems will undoubtedly benefit from this work through the deployment of high-performance, flexible, energy-efficient optically-connected memory architectures

Cycle-accurate evaluation of reconfigurable photonic networks-on-chip

There is little doubt that the most important limiting factors of the performance of next-generation Chip Multiprocessors (CMPs) will be the power efficiency and the available communication speed between cores. Photonic Networks-on-Chip (NoCs) have been suggested as a viable route to relieve the off- and on-chip interconnection bottleneck. Low-loss integrated optical waveguides can transport very high-speed data signals over longer distances as compared to on-chip electrical signaling. In addition, with the development of silicon microrings, photonic switches can be integrated to route signals in a data-transparent way. Although several photonic NoC proposals exist, their use is often limited to the communication of large data messages due to a relatively long set-up time of the photonic channels. In this work, we evaluate a reconfigurable photonic NoC in which the topology is adapted automatically (on a microsecond scale) to the evolving traffic situation by use of silicon microrings. To evaluate this system's performance, the proposed architecture has been implemented in a detailed full-system cycle-accurate simulator which is capable of generating realistic workloads and traffic patterns. In addition, a model was developed to estimate the power consumption of the full interconnection network which was compared with other photonic and electrical NoC solutions. We find that our proposed network architecture significantly lowers the average memory access latency (35% reduction) while only generating a modest increase in power consumption (20%), compared to a conventional concentrated mesh electrical signaling approach. When comparing our solution to high-speed circuit-switched photonic NoCs, long photonic channel set-up times can be tolerated which makes our approach directly applicable to current shared-memory CMPs

Fast synchronization 3R burst-mode receivers for passive optical networks

This paper gives a tutorial overview on high speed burst-mode receiver (BM-RX) requirements, specific for time division multiplexing passive optical networks, and design issues of such BM-RXs as well as their advanced design techniques. It focuses on how to design BM-RXs with short burst overhead for fast synchronization. We present design principles and circuit architectures of various types of burst-mode transimpedance amplifiers, burst-mode limiting amplifiers and burst-mode clock and data recovery circuits. The recent development of 10 Gb/s BM-RXs is highlighted also including dual-rate operation for coexistence with deployed PONs and on-chip auto reset generation to eliminate external timing-critical control signals provided by a PON medium access control. Finally sub-system integration and state-of-the-art system performance for 10 Gb/s PONs are reviewed

Reconfigurable Intelligent Surfaces for Wireless Communications: Principles, Challenges, and Opportunities

Recently there has been a flurry of research on the use of reconfigurable intelligent surfaces (RIS) in wireless networks to create smart radio environments. In a smart radio environment, surfaces are capable of manipulating the propagation of incident electromagnetic waves in a programmable manner to actively alter the channel realization, which turns the wireless channel into a controllable system block that can be optimized to improve overall system performance. In this article, we provide a tutorial overview of reconfigurable intelligent surfaces (RIS) for wireless communications. We describe the working principles of reconfigurable intelligent surfaces (RIS) and elaborate on different candidate implementations using metasurfaces and reflectarrays. We discuss the channel models suitable for both implementations and examine the feasibility of obtaining accurate channel estimates. Furthermore, we discuss the aspects that differentiate RIS optimization from precoding for traditional MIMO arrays highlighting both the arising challenges and the potential opportunities associated with this emerging technology. Finally, we present numerical results to illustrate the power of an RIS in shaping the key properties of a MIMO channel.Comment: to appear in the IEEE Transactions on Cognitive Communications and Networking (TCCN