On-a-chip microdischarge thruster arrays inspired by photonic device technology for plasma television

This study shows that the practical scaling of a hollow cathode thruster device to MEMS level should be possible albeit with significant divergence from traditional design. The main divergence is the need to operate at discharge pressures between 1-3bar to maintain emitter diameter pressure products of similar values to conventional hollow cathode devices. Without operating at these pressures emitter cavity dimensions become prohibitively large for maintenance of the hollow cathode effect and without which discharge voltage would be in the hundreds of volts as with conventional microdischarge devices. In addition this requires sufficiently constrictive orifice diameters in the 10µm – 50µm range for single cathodes or <5µm larger arrays. Operation at this pressure results in very small Debye lengths (4 -5.2pm) and leads to large reductions in effective work function (0.3 – 0.43eV) via the Schottky effect. Consequently, simple work function lowering compounds such as lanthanum hexaboride (LaB6) can be used to reduce operating temperature without the significant manufacturing complexity of producing porous impregnated thermionic emitters as with macro scale hollow cathodes, while still operating <1200°C at the emitter surface. The literature shows that LaB6 can be deposited using a variety of standard microfabrication techniques

Energy Academic Group Compilation of Abstracts 2012-2016

This report highlights the breadth of energy-related student research at NPS and reinforces the importance of energy as an integral aspect of today's Naval enterprise. The abstracts provided are from theses and a capstone project report completed by December 2012-March 2016 graduates.http://archive.org/details/energyacademicgr109454991

Building energy metering and environmental monitoring - A state-of-the-art review and directions for future research

Buildings are responsible for 40% of global energy use and contribute towards 30% of the total CO2 emissions. The drive to reduce energy consumption and associated greenhouse gas emissions from buildings has acted as a catalyst in the increasing installation of meters and sensors for monitoring energy use and indoor environmental conditions in buildings. This paper reviews the state-of-the-art in building energy metering and environmental monitoring, including their social, economic, environmental and legislative drivers. The integration of meters and sensors with existing building energy management systems (BEMS) is critically appraised, especially with regard to communication technologies and protocols such as ModBus, M-Bus, Ethernet, Cellular, ZigBee, WiFi and BACnet. Findings suggest that energy metering is covered in existing policies and regulations in only a handful of countries. Most of the legislations and policies on energy metering in Europe are in response to the Energy Performance of Buildings Directive (EPBD), 2002/91/EC. However, recent developments in policy are pointing towards more stringent metering requirements in future, moving away from voluntary to mandatory compliance. With regards to metering equipment, significant developments have been made in the recent past on miniaturisation, accuracy, robustness, data storage, ability to connect using multiple communication protocols, and the integration with BEMS and the Cloud – resulting in a range of available solutions, selection of which can be challenging. Developments in communication technologies, in particular in low-power wireless such as ZigBee and Bluetooth LE (BLE), are enabling cost-effective machine to machine (M2M) and internet of things (IoT) implementation of sensor networks. Privacy and data protection, however, remain a concern for data aggregators and end-users. The standardization of network protocols and device functionalities remains an active area of research and development, especially due to the prevalence of many protocols in the BEMS industry. Available solutions often lack interoperability between hardware and software systems, resulting in vendor lock-in. The paper provides a comprehensive understanding of available technologies for energy metering and environmental monitoring; their drivers, advantages and limitations; factors affecting their selection and future directions of research and development – for use a reference, as well as for generating further interest in this expanding research area

Controlling phonons and photons at the wavelength-scale: silicon photonics meets silicon phononics

Radio-frequency communication systems have long used bulk- and surface-acoustic-wave devices supporting ultrasonic mechanical waves to manipulate and sense signals. These devices have greatly improved our ability to process microwaves by interfacing them to orders-of-magnitude slower and lower loss mechanical fields. In parallel, long-distance communications have been dominated by low-loss infrared optical photons. As electrical signal processing and transmission approaches physical limits imposed by energy dissipation, optical links are now being actively considered for mobile and cloud technologies. Thus there is a strong driver for wavelength-scale mechanical wave or "phononic" circuitry fabricated by scalable semiconductor processes. With the advent of these circuits, new micro- and nanostructures that combine electrical, optical and mechanical elements have emerged. In these devices, such as optomechanical waveguides and resonators, optical photons and gigahertz phonons are ideally matched to one another as both have wavelengths on the order of micrometers. The development of phononic circuits has thus emerged as a vibrant field of research pursued for optical signal processing and sensing applications as well as emerging quantum technologies. In this review, we discuss the key physics and figures of merit underpinning this field. We also summarize the state of the art in nanoscale electro- and optomechanical systems with a focus on scalable platforms such as silicon. Finally, we give perspectives on what these new systems may bring and what challenges they face in the coming years. In particular, we believe hybrid electro- and optomechanical devices incorporating highly coherent and compact mechanical elements on a chip have significant untapped potential for electro-optic modulation, quantum microwave-to-optical photon conversion, sensing and microwave signal processing.Comment: 26 pages, 5 figure

A Dynamic Real-time Scheduling Algorithm for Reduced Energy Consumption

In embedded real-time systems, Dynamic Power Management (DPM) techniques have traditionally focused on reducing the dynamic power dissipation that occurs when a CMOS gate switches in a processor. Less attention has been given to processor leakage power or power consumed by I/O devices and other subsystems. I/O-based DPM techniques, however, have been extensively researched in non-real-time systems. These techniques focus on switching I/O devices to low power states based on various policies and are not applicable to real-time environments because of the non-deterministic nature of the policies. The challenge in conserving energy in embedded real-time systems is thus to reduce power consumption while preserving temporal correctness. To address this problem, we introduce three scheduling algorithms of increasing complexity: Energy-Aware EDF (EA-EDF), Enhanced Energy-Aware EDF (EEA-EDF) and Slack Utilization for Reduced Energy (SURE). The first two algorithms are relatively simple extensions to the Earliest Deadline First (EDF) scheduling algorithm that enable processor, I/O device, and subsystem energy conservation. The SURE algorithm utilizes slack to create a non-work-conserving approach to reducing power consumption. An evaluation of the three approaches shows that all three yield significant energy savings with respect to no DPM technique. The actual savings depends on the task set, shared devices, and the power requirements of the devices. When the cost of switching power states is low, the EA-EDF and EEA-EDF algorithms provide remarkable power savings considering their simplicity. In general, however, the higher the energy cost to switch power states, the more benefit SURE provides

A Dynamic Real-time Scheduling Algorithm for Reduced Energy Consumption

In embedded real-time systems, Dynamic Power Management (DPM) techniques have traditionally focused on reducing the dynamic power dissipation that occurs when a CMOS gate switches in a processor. Less attention has been given to processor leakage power or power consumed by I/O devices and other subsystems. I/O-based DPM techniques, however, have been extensively researched in non-real-time systems. These techniques focus on switching I/O devices to low power states based on various policies and are not applicable to real-time environments because of the non-deterministic nature of the policies. The challenge in conserving energy in embedded real-time systems is thus to reduce power consumption while preserving temporal correctness. To address this problem, we introduce three scheduling algorithms of increasing complexity: Energy-Aware EDF (EA-EDF), Enhanced Energy-Aware EDF (EEA-EDF) and Slack Utilization for Reduced Energy (SURE). The first two algorithms are relatively simple extensions to the Earliest Deadline First (EDF) scheduling algorithm that enable processor, I/O device, and subsystem energy conservation. The SURE algorithm utilizes slack to create a non-work-conserving approach to reducing power consumption. An evaluation of the three approaches shows that all three yield significant energy savings with respect to no DPM technique. The actual savings depends on the task set, shared devices, and the power requirements of the devices. When the cost of switching power states is low, the EA-EDF and EEA-EDF algorithms provide remarkable power savings considering their simplicity. In general, however, the higher the energy cost to switch power states, the more benefit SURE provides

National MEMS Technology Roadmap - Markets, Applications and Devices

MEMS teknologiaa on jo pitkään käytetty lukuisien eri laitteiden valmistamiseen. Osa näistä laitteista on ollut markkinoilla jo useita vuosia, kun taas osa on vasta kehitysvaiheessa. Jotta tutkimus ja kehitystyötä osattaisiin jatkossa kohdistaa oikeille painopistealueille, on tärkeää tietää mihin suuntaan kehitys on menossa. Tämä työ on osa kansallista MEMS teknologioiden tiekartta -projektia ja sen tavoitteena oli selvittää MEMS laitteiden kehityksen suuntaa. Työ toteutettiin laajana kirjallisuustutkimuksena. Lisäksi tulosten tueksi haastateltiin asiantuntijoita Suomen MEMS teollisuudesta. Työssä tarkasteltiin lukuisia jo markkinoilta löytyviä ja vasta kehitteillä olevia MEMS laitteita ja analysoitiin niitä sekä teknisestä että kaupallisesta näkökulmasta. Tutkimuksen perusteella kävi ilmi, että MEMS markkinat ovat pitkään muodostuneet vakiintuneista laitteista kuten mustesuihkupäistä, kiihtyvyysantureista, paineantureista sekä RF suotimista. Lisäksi mikrofonit, gyroskoopit ja optiset laitteet ovat olleet kaupallisesti saatavilla jo pitkään. Markkinat ovat hiljattain alkaneet tehdä tilaa myös uusille MEMS laitteille, joita tulee ulos nopeaa vauhtia. Viimeisimpänä markkinoille tulleita laitteita ovat erilaiset mikrofluidistiikka laitteet, mikrobolometrit sekä yhdistelmäanturit. Pian kaupallisesti saatavia laitteita ovat magnetometrit, automaattitarkennuslaitteet sekä MEMS oskillaattorit. Näiden laitteiden lisäksi kehitteillä on monia uusia MEMS laitteita, jotka saattavat tarjota merkittäviä mahdollisuuksia tulevaisuudessa. Kehitteillä olevia laitteita ovat erilaiset lääketieteelliset laitteet, atomikellot, mikrojäähdyttimet, mikrokaiuttimet, energiantuottolaitteet sekä RFID-laitteet. Kaikki kehitteillä olevista laitteista eivät välttämättä tule menestymään kaupallisesti, mutta jatkuva tutkimustyö osoittaa, että monilla MEMS laitteilla on potentiaalia useissa eri sovelluksissa. Markkinanäkökulmasta tarkasteltuna suurin potentiaali piilee kuluttajaelektroniikka markkinoilla. Muita tulevaisuuden kannalta potentiaalisia markkinoita ovat lääketieteelliset ja teollisuusmarkkinat. Tutkimus osoitti että MEMS laitteiden tutkimukseen ja kehitykseen liittyy monia potentiaalisia painopistealueita tulevaisuudessa. Käyttömahdollisuuksien parantamiseksi monet jo vakiintuneet laitteet kaipaavat vielä parannuksia. Toisaalta, jo olemassa olevia laitteita voidaan hyödyntää uusissa sovelluksissa. Lisäksi monet uusista ja kehitteillä olevista MEMS laitteista vaativat vielä kehitystyötä.MEMS technology has long been applied to the fabrication of various devices from which some have already been in use for several years, whereas others are still under development. In order to find future focus areas in research and development activities in the industry, it is important to know where the development is going. This thesis was conducted as a part of National MEMS technology roadmap, and it aimed for determining the evolution of MEMS devices. The work was conducted as an extensive literature review. In addition, experts from the Finnish MEMS industry were interviewed in order obtain a broader insight to the results. In this thesis various existing and emerging MEMS devices were reviewed and analyzed from technological and commercial perspectives. The study showed that the MEMS market has long been composed of established devices, such as inkjet print-heads, pressure sensors, accelerometers and RF filters. Also gyroscopes, microphones and optical MEMS devices have already been on the market for a long time. Lately, many new devices have started to find their place in the markets. The most recently introduced commercial devices include microfluidic devices, micro bolometers, and combo sensors. There are also a few devices including magnetometers, MEMS oscillators, and auto-focus devices that are currently crossing the gap from R&D to commercialization. In addition to the already available devices, many new MEMS devices are under development, and might offer significant opportunities in the future. These emerging devices include various bioMEMS devices, atomic clocks, micro-coolers, micro speakers, power MEMS devices, and RFID devices. All of the emerging devices might not find commercial success, but the constant stream shows, that there are numerous applications, where MEMS devices could be applied in. From a market point of view, the greatest potential in the future lies in consumer electronics market. Other highly potential markets include medical and industrial markets. The results of the thesis indicate that there are many potential focus areas in the future related to MEMS devices, including improvements of the existing devices in order to gain better utilization, application of the existing devices in new areas, and development work among the emerging devices

Wild animals' biologging through machine learning models

In recent decades the biodiversity crisis has been characterised by a decline and extinction of many animal species worldwide. To aid in understanding the threats and causes of this demise, conservation scientists rely on remote assessments. Innovation in technology in the form of microelectromechanical systems (MEMs) has brought about great leaps forward in understanding of animal life. The MEMs are now readily available to ecologists for remotely monitoring the activities of wild animals. Since the advent of electronic tags, methods such as biologging are being increasingly applied to the study of animal ecology, providing information unattainable through other techniques. In this paper, we discuss a few relevant instances of biologging studies. We present an overview on biologging research area, describing the evolution of acquisition of behavioural information and the improvement provided by tags. In second part we will review some common data analysis techniques used to identify daily activity of animals

Framework for integrated oil pipeline monitoring and incident mitigation systems

Wireless Sensor Nodes (motes) have witnessed rapid development in the last two decades. Though the design considerations for Wireless Sensor Networks (WSNs) have been widely discussed in the literature, limited investigation has been done for their application in pipeline surveillance. Given the increasing number of pipeline incidents across the globe, there is an urgent need for innovative and effective solutions for deterring the incessant pipeline incidents and attacks. WSN pose as a suitable candidate for such solutions, since they can be used to measure, detect and provide actionable information on pipeline physical characteristics such as temperature, pressure, video, oil and gas motion and environmental parameters. This paper presents specifications of motes for pipeline surveillance based on integrated systems architecture. The proposed architecture utilizes a Multi-Agent System (MAS) for the realization of an Integrated Oil Pipeline Monitoring and Incident Mitigation System (IOPMIMS) that can effectively monitor and provide actionable information for pipelines. The requirements and components of motes, different threats to pipelines and ways of detecting such threats presented in this paper will enable better deployment of pipeline surveillance systems for incident mitigation. It was identified that the shortcomings of the existing wireless sensor nodes as regards their application to pipeline surveillance are not effective for surveillance systems. The resulting specifications provide a framework for designing a cost-effective system, cognizant of the design considerations for wireless sensor motes used in pipeline surveillance