On-Chip Digital Decoupling Capacitance Methodology

Signal integrity has become a major problem in digital IC design. One cause of this problem is device scaling which results in a sharp reduction of supply voltage, creating stringent noise margin requirements to ensure functionality. Reductions in feature size also result in increased clock speeds leading to many different high frequency noise producing components. As on-chip area increases to allow for more computational capability, so does the amount of digital logic to be placed, magnifying the effects of noisy interconnect structures. Supply noise, modeled as AV = Ldi/dt , is caused by rapid current spikes during a rise or fall time. Decoupling capacitors often fill empty on-chip space for the purpose of limiting this noise. This work introduces a novel methodology that attempts to quantify and locate decoupling capacitors within a power distribution network. The bondwire attached on the periphery of the face of the die is taken to be the dominant source of inductance. It is shown that distributing capacitance closer to the switching elements is most effective at reducing supply noise. A chip has been designed using TSMC 90 nm technology that implements the ideas presented in this work. Simulation results show that noise fluctuations are high enough such that random placement of decoupling capacitance is not effective for large digital structures. The amount of interconnect generated on-chip noise increases with area, resulting in the need for an optimal decoupling scheme. As scaling continues, supply voltages and noise margins will decrease, creating the need for a robust decoupling capacitance methodology

Performance and power optimization in VLSI physical design

As VLSI technology enters the nanoscale regime, a great amount of efforts have been made to reduce interconnect delay. Among them, buffer insertion stands out as an effective technique for timing optimization. A dramatic rise in on-chip buffer density has been witnessed. For example, in two recent IBM ASIC designs, 25% gates are buffers. In this thesis, three buffer insertion algorithms are presented for the procedure of performance and power optimization. The second chapter focuses on improving circuit performance under inductance effect. The new algorithm works under the dynamic programming framework and runs in provably linear time for multiple buffer types due to two novel techniques: restrictive cost bucketing and efficient delay update. The experimental results demonstrate that our linear time algorithm consistently outperforms all known RLC buffering algorithms in terms of both solution quality and runtime. That is, the new algorithm uses fewer buffers, runs in shorter time and the buffered tree has better timing. The third chapter presents a method to guarantee a high fidelity signal transmission in global bus. It proposes a new redundant via insertion technique to reduce via variation and signal distortion in twisted differential line. In addition, a new buffer insertion technique is proposed to synchronize the transmitted signals, thus further improving the effectiveness of the twisted differential line. Experimental results demonstrate a 6GHz signal can be transmitted with high fidelity using the new approaches. In contrast, only a 100MHz signal can be reliably transmitted using a single-end bus with power/ground shielding. Compared to conventional twisted differential line structure, our new techniques can reduce the magnitude of noise by 45% as witnessed in our simulation. The fourth chapter proposes a buffer insertion and gate sizing algorithm for million plus gates. The algorithm takes a combinational circuit as input instead of individual nets and greatly reduces the buffer and gate cost of the entire circuit. The algorithm has two main features: 1) A circuit partition technique based on the criticality of the primary inputs, which provides the scalability for the algorithm, and 2) A linear programming formulation of non-linear delay versus cost tradeoff, which formulates the simultaneous buffer insertion and gate sizing into linear programming problem. Experimental results on ISCAS85 circuits show that even without the circuit partition technique, the new algorithm achieves 17X speedup compared with path based algorithm. In the meantime, the new algorithm saves 16.0% buffer cost, 4.9% gate cost, 5.8% total cost and results in less circuit delay

Power Reductions with Energy Recovery Using Resonant Topologies

The problem of power densities in system-on-chips (SoCs) and processors has become more exacerbated recently, resulting in high cooling costs and reliability issues. One of the largest components of power consumption is the low skew clock distribution network (CDN), driving large load capacitance. This can consume as much as 70% of the total dynamic power that is lost as heat, needing elaborate sensing and cooling mechanisms. To mitigate this, resonant clocking has been utilized in several applications over the past decade. An improved energy recovering reconfigurable generalized series resonance (GSR) solution with all the critical support circuitry is developed in this work. This LC resonant clock driver is shown to save about 50% driver power (\u3e40% overall), on a 22nm process node and has 50% less skew than a non-resonant driver at 2GHz. It can operate down to 0.2GHz to support other energy savings techniques like dynamic voltage and frequency scaling (DVFS). As an example, GSR can be configured for the simpler pulse series resonance (PSR) operation to enable further power saving for double data rate (DDR) applications, by using de-skewing latches instead of flip-flop banks. A PSR based subsystem for 40% savings in clocking power with 40% driver active area reduction xii is demonstrated. This new resonant driver generates tracking pulses at each transition of clock for dual edge operation across DVFS. PSR clocking is designed to drive explicit-pulsed latches with negative setup time. Simulations using 45nm IBM/PTM device and interconnect technology models, clocking 1024 flip-flops show the reductions, compared to non-resonant clocking. DVFS range from 2GHz/1.3V to 200MHz/0.5V is obtained. The PSR frequency is set \u3e3× the clock rate, needing only 1/10th the inductance of prior-art LC resonance schemes. The skew reductions are achieved without needing to increase the interconnect widths owing to negative set-up times. Applications in data circuits are shown as well with a 90nm example. Parallel resonant and split-driver non-resonant configurations as well are derived from GSR. Tradeoffs in timing performance versus power, based on theoretical analysis, are compared for the first time and verified. This enables synthesis of an optimal topology for a given application from the GSR