How to Understand LMMSE Transceiver Design for MIMO Systems From Quadratic Matrix Programming

In this paper, a unified linear minimum mean-square-error (LMMSE) transceiver design framework is investigated, which is suitable for a wide range of wireless systems. The unified design is based on an elegant and powerful mathematical programming technology termed as quadratic matrix programming (QMP). Based on QMP it can be observed that for different wireless systems, there are certain common characteristics which can be exploited to design LMMSE transceivers e.g., the quadratic forms. It is also discovered that evolving from a point-to-point MIMO system to various advanced wireless systems such as multi-cell coordinated systems, multi-user MIMO systems, MIMO cognitive radio systems, amplify-and-forward MIMO relaying systems and so on, the quadratic nature is always kept and the LMMSE transceiver designs can always be carried out via iteratively solving a number of QMP problems. A comprehensive framework on how to solve QMP problems is also given. The work presented in this paper is likely to be the first shoot for the transceiver design for the future ever-changing wireless systems.Comment: 31 pages, 4 figures, Accepted by IET Communication

Relay Selection for Bidirectional AF Relay Network with Outdated CSI

Most previous researches on bidirectional relay selection (RS) typically assume perfect channel state information (CSI). However, outdated CSI, caused by the the time-variation of channel, cannot be ignored in the practical system, and it will deteriorate the performance. In this paper, the effect of outdated CSI on the performance of bidirectional amplify-and-forward RS is investigated. The optimal single RS scheme in minimizing the symbol error rate (SER) is revised by incorporating the outdated channels. The analytical expressions of end-to-end signal to noise ratio (SNR) and symbol error rate (SER) are derived in a closed-form, along with the asymptotic SER expression in high SNR. All the analytical expressions are verified by the Monte-Carlo simulations. The analytical and the simulation results reveal that once CSI is outdated, the diversity order degrades to one from full diversity. Furthermore, a multiple RS scheme is proposed and verified that this scheme is a feasible solution to compensate the diversity loss caused by outdated CSI.Comment: accepted by IEEE Transactions on Vehicular Technolog

Distributed space-time coding for two-way wireless relay networks

In this paper, we consider distributed space-time coding for two-way wireless relay networks, where communication between two terminals is assisted by relay nodes. Relaying protocols using two, three, and four time slots are proposed. The protocols using four time slots are the traditional amplify-and-forward (AF) and decode-and-forward (DF) protocols, which do not consider the property of the two-way traffic. A new class of relaying protocols, termed as partial decode-and-forward (PDF), is developed for the two time slots transmission, where each relay first removes part of the noise before sending the signal to the two terminals. Protocols using three time slots are proposed to compensate the fact that the two time slots protocols cannot make use of direct transmission between the two terminals. For all protocols, after processing their received signals, the relays encode the resulting signals using a distributed linear dispersion (LD) code. The proposed AF protocols are shown to achieve the diversity order of min{N,K}(1- (log log P/log P)), where N is the number of relays, P is the total power of the network, and K is the number of symbols transmitted during each time slot. When random unitary matrix is used for LD code, the proposed PDF protocols resemble random linear network coding, where the former operates on the unitary group and the latter works on the finite field. Moreover, PDF achieves the diversity order of min{N,K} but the conventional DF can only achieve the diversity order of 1. Finally, we find that two time slots protocols also have advantages over four-time-slot protocols in media access control (MAC) layer

Power Switching Protocol for Two-way Relaying Network under Hardware Impairments

In this paper, we analyze the impact of hardware impairments at relay node and source node (i.e. imperfect nodes) on network performance by evaluating outage probability based on the effective signal to noise and distortion ratio (SNDR). Especially, we propose energy harvesting protocol at the relay and source nodes, namely, power switching imperfect relay (PSIR) and power switching imperfect source (PSIS). Aiming to determine the performance of energy constrained network, we first derive closed-form expressions of the outage probability and then the throughput can be maximized in delay-limited transmission mode. The simulation results provide practical insights into the impacts of hardware impairments and power switching factors of the energy harvesting protocol on the performance of energy harvesting enabled two-way relaying network

Optimal Training Design for Channel Estimation in Decode-and-Forward Relay Networks With Individual and Total Power Constraints

In this paper, we study the channel estimation and the optimal training design for relay networks that operate under the decode-and-forward (DF) strategy with the knowledge of the interference covariance. In addition to the total power constraint on all the relays, we introduce individual power constraint for each relay, which reflects the practical scenario where all relays are separated from one another. Considering the individual power constraint for the relay networks is the major difference from that in the traditional point-to-point communication systems where only a total power constraint exists for all colocated antennas. Two types of channel estimation are involved: maximum likelihood (ML) and minimum mean square error (MMSE). For ML channel estimation, the channels are assumed as deterministic and the optimal training results from an efficient multilevel waterfilling type solution that is derived from the majorization theory. For MMSE channel estimation, however, the second-order statistics of the channels are assumed known and the general optimization problem turns out to be nonconvex. We instead consider three special yet reasonable scenarios. The problem in the first scenario is convex and could be efficiently solved by state-of-the-art optimization tools. Closed-form waterfilling type solutions are found in the remaining two scenarios, of which the first one has an interesting physical interpretation as pouring water into caves

Joint Source and Relay Precoding Designs for MIMO Two-Way Relaying Based on MSE Criterion

Properly designed precoders can significantly improve the spectral efficiency of multiple-input multiple-output (MIMO) relay systems. In this paper, we investigate joint source and relay precoding design based on the mean-square-error (MSE) criterion in MIMO two-way relay systems, where two multi-antenna source nodes exchange information via a multi-antenna amplify-and-forward relay node. This problem is non-convex and its optimal solution remains unsolved. Aiming to find an efficient way to solve the problem, we first decouple the primal problem into three tractable sub-problems, and then propose an iterative precoding design algorithm based on alternating optimization. The solution to each sub-problem is optimal and unique, thus the convergence of the iterative algorithm is guaranteed. Secondly, we propose a structured precoding design to lower the computational complexity. The proposed precoding structure is able to parallelize the channels in the multiple access (MAC) phase and broadcast (BC) phase. It thus reduces the precoding design to a simple power allocation problem. Lastly, for the special case where only a single data stream is transmitted from each source node, we present a source-antenna-selection (SAS) based precoding design algorithm. This algorithm selects only one antenna for transmission from each source and thus requires lower signalling overhead. Comprehensive simulation is conducted to evaluate the effectiveness of all the proposed precoding designs.Comment: 32 pages, 10 figure