250 research outputs found
Power allocation for multiband coded OFDM systems with limited feedback
In this paper, we study the power allocation for multiband coded OFDM systems. With limited feedback, we propose an effective power allocation method across OFDM bands to maximize the throughput and achieve the quality of service target. To facilitate the proposed method, two optimization algorithms based on greedy and dynamic programming principles are discussed. The trade-off between performance and complexity is provided. Simulation results show that the proposed power allocation mechanism allows a signal to noise ratio gain of 2 dB at a goodput of 2.5 bit per second per Hz over the multiband OFDM systems with equal power allocation
Performance Analysis and Enhancement of Multiband OFDM for UWB Communications
In this paper, we analyze the frequency-hopping orthogonal frequency-division
multiplexing (OFDM) system known as Multiband OFDM for high-rate wireless
personal area networks (WPANs) based on ultra-wideband (UWB) transmission.
Besides considering the standard, we also propose and study system performance
enhancements through the application of Turbo and Repeat-Accumulate (RA) codes,
as well as OFDM bit-loading. Our methodology consists of (a) a study of the
channel model developed under IEEE 802.15 for UWB from a frequency-domain
perspective suited for OFDM transmission, (b) development and quantification of
appropriate information-theoretic performance measures, (c) comparison of these
measures with simulation results for the Multiband OFDM standard proposal as
well as our proposed extensions, and (d) the consideration of the influence of
practical, imperfect channel estimation on the performance. We find that the
current Multiband OFDM standard sufficiently exploits the frequency selectivity
of the UWB channel, and that the system performs in the vicinity of the channel
cutoff rate. Turbo codes and a reduced-complexity clustered bit-loading
algorithm improve the system power efficiency by over 6 dB at a data rate of
480 Mbps.Comment: 32 pages, 10 figures, 1 table. Submitted to the IEEE Transactions on
Wireless Communications (Sep. 28, 2005). Minor revisions based on reviewers'
comments (June 23, 2006
Cross-Layer Resource Allocation for MB-OFDM UWB Systems
ISBN 978-953-3076461-0International audienc
Spectrum control and iterative coding for high capacity multiband OFDM
The emergence of Multiband Orthogonal Frequency Division Modulation (MB-OFDM) as an ultra-wideband (UWB) technology injected new optimism in the market through realistic commercial implementation, while keeping promise of high data rates intact. However, it has also brought with it host of issues, some of which are addressed in this thesis.
The thesis primarily focuses on the two issues of spectrum control and user capacity for the system currently proposed by the Multiband OFDM Alliance (MBOA). By showing that line spectra are still an issue for new modulation scheme (MB-OFDM), it proposes a mechanism of scrambling the data with an increased length linear feedback shift register (compared to the current proposal), a new set of seeds, and random phase reversion for the removal of line spectra. Following this, the thesis considers a technique for increasing the user capacity of the current MB-OFDM system to meet the needs of future wireless systems, through an adaptive multiuser synchronous coded transmission scheme. This involves real time iterative generation of user codes, which are generated over time and frequency leading to increased capacity. With the assumption of complete channel state information (CSI) at the receiver, an iterative MMSE algorithm is used which involves replacement of each users s signature with its normalized MMSE filter function allowing the overall Total Squared Correlation (TSC) of the system to decrease until the algorithm converges to a fixed set of signature vectors. This allows the system to be overloaded and user\u27s codes to be quasi-orthogonal. Simulation results show that for code of length nine (spread over three frequency bands and three time slots), ten users can be accommodated for a given QoS and with addition of single frequency sub-band which allows the code length to increase from nine to twelve (four frequency sub-bands and three time slots), fourteen users with nearly same QoS can be accommodated in the system. This communication is overlooked by a central controller with necessary functionalities to facilitate the process. The thesis essentially considers the uplink from transmitting devices to this central controller. Furthermore, analysis of this coded transmission in presence of interference is carried to display the robustness of this scheme through its adaptation by incorporating knowledge of existing Narrowband (NB) Interference for computing the codes. This allows operation of sub-band coexisting with NB interference without substantial degradation given reasonable interference energy (SIR=-l0dB and -5dB considered). Finally, the thesis looks at design implementation and convergence issues related to code vector generation whereby, use of Lanczos algorithm is considered for simpler design and faster convergence. The algorithm can be either used to simplify design implementation by providing simplified solution to Weiner Hopf equation (without requiring inverse of correlation matrix) over Krylov subspace or can be used to expedite convergence by updating the signature sequence with eigenvector corresponding to the least eigenvalue of the signature correlation matrix through reduced rank eigen subspace search
Channel modeling and resource allocation in OFDM systems
The increasing demand for high data rate in wireless communication systems gives rise to broadband communication systems. The radio channel is plagued by multipath propagation, which causes frequency-selective fading in broadband signals. Orthogonal Frequency-Division Multiplexing (OFDM) is a modulation scheme specifically designed to facilitate high-speed data transmission over frequency-selective fading channels. The problem of channel modeling in the frequency domain is first investigated for the wideband and ultra wideband wireless channels. The channel is converted into an equivalent discrete channel by uniformly sampling the continuous channel frequency response (CFR), which results in a discrete CFR. A necessary and sufficient condition is established for the existence of parametric models for the discrete CFR. Based on this condition, we provide a justification for the effectiveness of previously reported autoregressive (AR) models in the frequency domain of wideband and ultra wideband channels. Resource allocation based on channel state information (CSI) is known to be a very powerful method for improving the spectral efficiency of OFDM systems. Bit and power allocation algorithms have been discussed for both static channels, where perfect knowledge of CSI is assumed, and time-varying channels, where the knowledge of CSI is imperfect. In case of static channels, the optimal resource allocation for multiuser OFDM systems has been investigated. Novel algorithms are proposed for subcarrier allocation and bit-power allocation with considerably lower complexity than other schemes in the literature. For time-varying channel, the error in CSI due to channel variation is recognized as the main obstacle for achieving the full potential of resource allocation. Channel prediction is proposed to suppress errors in the CSI and new bit and power allocation schemes incorporating imperfect CSI are presented and their performance is evaluated through simulations. Finally, a maximum likelihood (ML) receiver for Multiband Keying (MBK) signals is discussed, where MBK is a modulation scheme proposed for ultra wideband systems (UWB). The receiver structure and the associated ML decision rule is derived through analysis. A suboptimal algorithm based on a depth-first tree search is introduced to significantly reduce the computational complexity of the receiver
Cross-Layer Design for Multi-Antenna Ultra-Wideband Systems
Ultra-wideband (UWB) is an emerging technology that offers great promises to satisfy the growing demand for low cost and high-speed digital wireless home networks. The enormous bandwidth available, the potential for high data rates, as well as the potential for small size and low processing power long with low implementation cost, all present a unique opportunity for UWB to become a widely adopted radio solution for future wireless home-networking technology. Nevertheless, in order for UWB devices to coexist with other existing wireless technology, the transmitted power level of UWB is strictly limited by the FCC spectral mask. Such limitation poses significant design challenges to any UWB system.
This thesis introduces various means to cope with these design challenges. Advanced technologies including multiple-input multiple-output (MIMO) coding, cooperative communications, and
cross-layer design are employed to enhance the performance and coverage range of UWB systems. First a MIMO-coding framework for multi-antenna UWB communication systems is developed. By a technique of band hopping in combination with jointly coding across spatial, temporal, and frequency domains, the proposed scheme is able to
exploit all the available spatial and frequency diversity, richly inherent in UWB channels. Then, the UWB performance in realistic UWB channel environments is characterized. The proposed performance analysis successfully captures the unique multipath-rich property and random-clustering phenomenon of UWB channels. Next, a
cross-layer channel allocation scheme for UWB multiband OFDM systems is proposed. The proposed scheme optimally allocates subbands, transmitted power, and data rates among users by taking into consideration the performance requirement, the power limitation, as well as the band hopping for users with different data rates. Also, an employment of cooperative communications in UWB systems is proposed to enhance the UWB performance and coverage by exploiting the broadcasting nature of wireless channels and the cooperation among UWB devices. Furthermore, an OFDM cooperative protocol is developed and then applied to enhance the performance of UWB systems. The proposed cooperative protocol not only achieves full diversity but also efficiently utilizes the available bandwidth
Design and implementation of frequency synthesizers for 3-10 ghz mulitband ofdm uwb communication
The allocation of frequency spectrum by the FCC for Ultra Wideband (UWB)
communications in the 3.1-10.6 GHz has paved the path for very high data rate Gb/s
wireless communications. Frequency synthesis in these communication systems involves
great challenges such as high frequency and wideband operation in addition to stringent
requirements on frequency hopping time and coexistence with other wireless standards.
This research proposes frequency generation schemes for such radio systems and their
integrated implementations in silicon based technologies. Special emphasis is placed on
efficient frequency planning and other system level considerations for building compact
and practical systems for carrier frequency generation in an integrated UWB radio.
This work proposes a frequency band plan for multiband OFDM based UWB
radios in the 3.1-10.6 GHz range. Based on this frequency plan, two 11-band frequency
synthesizers are designed, implemented and tested making them one of the first
frequency synthesizers for UWB covering 78% of the licensed spectrum. The circuits are
implemented in 0.25µm SiGe BiCMOS and the architectures are based on a single VCO at a fixed frequency followed by an array of dividers, multiplexers and single sideband
(SSB) mixers to generate the 11 required bands in quadrature with fast hopping in much
less than 9.5 ns. One of the synthesizers is integrated and tested as part of a 3-10 GHz
packaged receiver. It draws 80 mA current from a 2.5 V supply and occupies an area of
2.25 mm2.
Finally, an architecture for a UWB synthesizer is proposed that is based on a
single multiband quadrature VCO, a programmable integer divider with 50% duty cycle
and a single sideband mixer. A frequency band plan is proposed that greatly relaxes the
tuning range requirement of the multiband VCO and leads to a very digitally intensive
architecture for wideband frequency synthesis suitable for implementation in deep
submicron CMOS processes. A design in 130nm CMOS occupies less than 1 mm2 while
consuming 90 mW. This architecture provides an efficient solution in terms of area and
power consumption with very low complexity
- …