Planning and Real Time Control of a Minimally Invasive Robotic Surgery System

This paper introduces the planning and control software of a teleoperating robotic system for minimally invasive surgery. It addresses the problem of how to organize a complex system with 41 degrees of freedom including robot setup planning, force feedback control and nullspace handling with three robotic arms. The planning software is separated into sequentially executed planning and registration procedures. An optimal setup is first planned in virtual reality and then adapted to variations in the operating room. The real time control system is composed of hierarchical layers. The design is flexible and expandable without losing performance. Structure, functionality and implementation of planning and control are described. The robotic system provides the surgeon with an intuitive hand-eye-coordination and force feedback in teleoperation for both hands

Function based control for bilateral systems in tele-micromanipulation

Design of a motion control system should take into account (a) unconstrained motion performed without interaction with environment or any other system, and (b) constrained motion with system in contact with environment or other systems. Control in both cases can be formulated in terms of maintaining desired system configuration what makes essentially the same structure for common tasks: trajectory tracking, interaction force control, compliance control etc. The same design approach can be used to formulate control in bilateral systems aimed to maintain desired functional relations between human and environment through master and slave motion systems. Implementation of the methodology is currently being pursued with a custom built Tele-micromanipulation setup and preliminary results concerning force/position tracking and transparency between master and slave are clearly demonstrated

Impedance hand controllers for increasing efficiency in teleoperations

An impedance hand controller with direct force feedback is examined as an alternative to bilateral force reflection in teleoperations involving force contact. Experimentation revealed an operator preference for direct force feedback which provided a better feel of contact with the environment. The advantages of variable arm impedance were also made clear in tracking tests where subjects preferred the larger hand controller inertias made possible by the acceleration feedback loop in the master arm. The ability to decouple the hand controller impedance from the slave arm dynamics is expected to be even more significant when the inertial properties of various payloads in the slave arm are considered

Enhanced teleoperation performance using hybrid control and virtual fixture

To develop secure, natural and effective teleoperation, the perception of the slave plays a key role for the interaction of a human operator with the environment. By sensing slave information, the human operator can choose the correct operation in a process during the human–robot interaction.This paper develops an integrated scheme based on a hybrid control and virtual fixture approach for the telerobot. The human operator can sense the slave interaction condition and adjust the master device via the surface electromyographic signal. This hybrid control method integrates the proportional-derivative control and the variable stiffness control, and involves the muscle activation at the same time. It is proposed to quantitatively analyse the human operator’s control demand to enhance the control performance of the teleoperation system. In addition, due to unskilful operation and muscle physiological tremor of the human operator, a virtual fixture method is developed to ensure accuracy of operation and to reduce the operation pressure on the human operator. Experimental results demonstrated the effectiveness of the proposed method for the teleoperated robot

A prototype telerobotic platform for live transmission line maintenance: review of design and development.

This paper reports technical design of a novel experimental test facility, using haptic-enabled teleoperation of robotic manipulators, for live transmission line maintenance. The goal is to study and develop appropriate techniques in repair overhead power transmission lines by allowing linemen to wirelessly guide a remote manipulator, installed on a crane bucket, to execute dexterous maintenance tasks, such as twisting a tie wire around a cable. Challenges and solutions for developing such a system are outlined. The test facility consists of a PHANToM Desktop haptic device (master site), an industrial hydraulic manipulator (slave site) mounted atop a Stewart platform, and a wireless communication channel connecting the master and slave sites. The teleoperated system is tested under different force feedback schemes, while the base is excited and the communication channel is delayed and/or lossy to emulate realistic network behaviors. The force feedback schemes are: virtual fixture, augmentation force and augmented virtual fixture. Performance of each scheme is evaluated under three measures: task completion time, number of failed trials and displacement of the slave manipulator end-effector. The developed test rig has been shown to be successful in performing haptic-enabled teleoperation for live-line maintenance in a laboratory setting. The authors aim at establishing a benchmark test facility for objective evaluation of ideas and concepts in the teleoperation of live-line maintenance tasks

A Wave Variable Approach with Multiple Channel Architecture for Teleoperated System

© 2013 IEEE. Performance of teleoperation can be greatly influenced by time delay in the process of tele-manipulation with respect to accuracy and transparency. Wave variable is an effective algorithm to achieve a good stable capability. However, some traditional wave variable methods may decrease the performance of transparency and suffer the impacts of wave reflection. To deal with the problem of stability and transparency in teleoperation, in this paper, a novel wave variable method with four channel is presented to achieve stable tracking in position and force. In addition, the proposed method can achieve the distortion compensation and reduce the impacts of wave reflection. The simulation experimental results verified the tracking performance of the proposed method

Coordination Control of a Dual-Arm Exoskeleton Robot Using Human Impedance Transfer Skills

This paper has developed a coordination control method for a dual-arm exoskeleton robot based on human impedance transfer skills, where the left (master) robot arm extracts the human limb impedance stiffness and position profiles, and then transfers the information to the right (slave) arm of the exoskeleton. A computationally efficient model of the arm endpoint stiffness behavior is developed and a co-contraction index is defined using muscular activities of a dominant antagonistic muscle pair. A reference command consisting of the stiffness and position profiles of the operator is computed and realized by one robot in real-time. Considering the dynamics uncertainties of the robotic exoskeleton, an adaptive-robust impedance controller in task space is proposed to drive the slave arm tracking the desired trajectories with convergent errors. To verify the robustness of the developed approach, a study of combining adaptive control and human impedance transfer control under the presence of unknown interactive forces is conducted. The experimental results of this paper suggest that the proposed control method enables the subjects to execute a coordination control task on a dual-arm exoskeleton robot by transferring the stiffness from the human arm to the slave robot arm, which turns out to be effective

Characterization and evaluation of a bilateral command architecture for a tele-operated system

The objective of the stage was the evaluation of a bilateral teleoperation benchmark for a tele-echography system and the final goal was to test the effectiveness of the wave variables formulation on this architecture. When communicating over a channel that introduces a time delay we need to encode the signals in a way that helps prevent instability of the system: in this thesis we used the so called wave variables formulation applied on a real tele-echography architecture (used to perform an echography on a patient that is in a different location from the doctor performing it). As an additional aid (other than visual feedback) we realized a force feedback from the patient robot to the doctor's probe using data collected by a force sensorope