Antenna Design for 5G and Beyond

With the rapid evolution of the wireless communications, fifth-generation (5G) communication has received much attention from both academia and industry, with many reported efforts and research outputs and significant improvements in different aspects, such as data rate speed and resolution, mobility, latency, etc. In some countries, the commercialization of 5G communication has already started as well as initial research of beyond technologies such as 6G.MIMO technology with multiple antennas is a promising technology to obtain the requirements of 5G/6G communications. It can significantly enhance the system capacity and resist multipath fading, and has become a hot spot in the field of wireless communications. This technology is a key component and probably the most established to truly reach the promised transfer data rates of future communication systems. In MIMO systems, multiple antennas are deployed at both the transmitter and receiver sides. The greater number of antennas can make the system more resistant to intentional jamming and interference. Massive MIMO with an especially high number of antennas can reduce energy consumption by targeting signals to individual users utilizing beamforming.Apart from sub-6 GHz frequency bands, 5G/6G devices are also expected to cover millimeter-wave (mmWave) and terahertz (THz) spectra. However, moving to higher bands will bring new challenges and will certainly require careful consideration of the antenna design for smart devices. Compact antennas arranged as conformal, planar, and linear arrays can be employed at different portions of base stations and user equipment to form phased arrays with high gain and directional radiation beams. The objective of this Special Issue is to cover all aspects of antenna designs used in existing or future wireless communication systems. The aim is to highlight recent advances, current trends, and possible future developments of 5G/6G antennas

1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface

A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance

Beam scanning by liquid-crystal biasing in a modified SIW structure

A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium

Antenna Design for 5G and Beyond

This book is a reprint of the Special Issue Antenna Design for 5G and Beyond that was published in Sensors

Antenna Designs for 5G/IoT and Space Applications

This book is intended to shed some light on recent advances in antenna design for these new emerging applications and identify further research areas in this exciting field of communications technologies. Considering the specificity of the operational environment, e.g., huge distance, moving support (satellite), huge temperature drift, small dimension with respect to the distance, etc, antennas, are the fundamental device allowing to maintain a constant interoperability between ground station and satellite, or different satellites. High gain, stable (in temperature, and time) performances, long lifecycle are some of the requirements that necessitates special attention with respect to standard designs. The chapters of this book discuss various aspects of the above-mentioned list presenting the view of the authors. Some of the contributors are working strictly in the field (space), so they have a very targeted view on the subjects, while others with a more academic background, proposes futuristic solutions. We hope that interested reader, will find a fertile source of information, that combined with their interest/background will allow efficiently exploiting the combination of these two perspectives

Printed circuit metasurfaces for millimeter wave applications

Metasurfaces are artificial composite materials with subwavelength inclusions which have been shown to enable very versatile manipulation of electromagnetic waves. Especially at microwave frequencies, the concept is widely explored and the scope of previous methods of wavefront manipulation such as frequency selective surfaces and leaky-wave antennas has been largely extended. Emerging applications like next generation wireless communication and radar sensing could benefit from novel metasurface-based antennas which have been recently proposed. Although most of these emerging applications use frequencies of operation in the millimeter wave (mm-wave) band, research on metasurfaces in this band is still scarce. Many secondary effects known in the microwave community such as fabrication constraints and material losses are more severe using mm-waves and they significantly hamper the development of efficient devices. The aim of this thesis is to explore design and characterization methods for mm-wave metasurfaces. In particular, this thesis concentrates on planar metasurface architectures that are compatible with established printed circuit board fabrication, which is a requirement for many consumer applications. Causes for significant performance degradation in printed circuit metasurfaces for mm-waves are identified and synthesis techniques with which they can be minimized are proposed. The effectiveness of the proposed synthesis techniques is verified by comprehensive experimental works. Building on these synthesis approaches, two kinds of antenna systems are experimentally demonstrated, based on transmissive metasurfaces and on leaky-wave antennas

Broadband Approaches And Beam-Scanning Techniques For Reflectarray Antenna

Reflectarray antennas combine the numerous advantages of reflector antennas and phased array antennas and create a hybrid high-gain antenna with a low-profile, low-mass, easy-fabrication, and diversified radiation performance. However, it still has some inherent drawbacks, such as limited bandwidth and scanning range, which are targeted in this dissertation. At first, the array theory approach for radiation analysis of reflectarray antennas is described and implemented. Numerical results are then presented and compared with reference results to confirm its reliability. As the most critical influential factor to the reflectarray bandwidth, the element bandwidth was studied at first, and the effects of element shape and substrate thickness were investigated. Then, a comprehensive study was performed to investigate the bandwidth performance of reflectarrays on the system level. The effect of aperture size, element bandwidth and phase synthesis method was discussed in sequence. Particularly, a novel phase synthesis approach was proposed, which enables reflectarray to achieve a significant bandwidth improvement even with elements of narrow bandwidth. Prototypes are fabricated and tested to validate the idea. Since the reflectarray antenna is a hybrid product of reflector and phased array antennas, its main beam could be steered by either rotating its feed or reconfiguring its element phases. The former way was explored at first. An improved phase design was proposed for reflectarrays mimicing parabolic-cylindrical reflectors to expand its scanning range. The published achievements of reconfigurable reflectarrays design are revieand it is found that currently efficiency is a big problem. A 1-bit 10ã—10 reconfigurable reflectarray using pin diode was designed, fabricated and measured to explore the energy loss, and experimental results shothat 14% efficiency could be reached. In summary, some improved designs regarding bandwidth and scanning performance for reflectarrays are proposed in this dissertation. Various factors affecting reflectarray bandwidth are investigated, which shall provide some guidelines regarding bandwidth improvement. On the other hand, two designs are presented to explore the beam scanning characteristic of reflectarray antenna, by mechanical and electrical ways respectively. Several prototypes have been fabricated and measured, demonstrating the novel features and potential applications of reflectarray antennas

Chipless RFID sensor systems for structural health monitoring

Ph. D. ThesisDefects in metallic structures such as crack and corrosion are major sources of catastrophic failures, and thus monitoring them is a crucial issue. As periodic inspection using the nondestructive testing and evaluation (NDT&E) techniques is slow, costly, limited in range, and cumbersome, novel methods for in-situ structural health monitoring (SHM) are required. Chipless radio frequency identification (RFID) is an emerging and attractive technology to implement the internet of things (IoT) based SHM. Chipless RFID sensors are not only wireless, passive, and low-cost as the chipped RFID counterpart, but also printable, durable, and allow for multi-parameter sensing. This thesis proposes the design and development of chipless RFID sensor systems for SHM, particularly for defect detection and characterization in metallic structures. Through simulation studies and experimental validations, novel metal-mountable chipless RFID sensors are demonstrated with different reader configurations and methods for feature extraction, selection, and fusion. The first contribution of this thesis is the design of a chipless RFID sensor for crack detection and characterization based on the circular microstrip patch antenna (CMPA). The sensor provides a 4-bit ID and a capability of indicating crack width and orientation simultaneously using the resonance frequency shift. The second contribution is a chipless RFID sensor designed based on the frequency selective surface (FSS) and feature fusion for corrosion characterization. The FSS-based sensor generates multiple resonance frequency features that can reveal corrosion progression, while feature fusion is applied to enhance the sensitivity and reliability of the sensor. The third contribution deals with robust detection and characterization of crack and corrosion in a realistic environment using a portable reader. A multi-resonance chipless RFID sensor is proposed along with the implementation of a portable reader using an ultra-wideband (UWB) radar module. Feature extraction and selection using principal component analysis (PCA) is employed for multi-parameter evaluation. Overall, chipless RFID sensors are small, low-profile, and can be used to quantify and characterize surface crack and corrosion undercoating. Furthermore, the multi-resonance characteristics of chipless RFID sensors are useful for integrating ID encoding and sensing functionalities, enhancing the sensor performance, as well as for performing multi-parameter analysis of defects. The demonstrated system using a portable reader shows the capability of defects characterization from a 15-cm distance. Hence, chipless RFID sensor systems have great potential to be an alternative sensing method for in-situ SHM.Indonesia Endowment Fund for Education (LPDP

Recent Advances and Future Trends in Nanophotonics

Nanophotonics has emerged as a multidisciplinary frontier of science and engineering. Due to its high potential to contribute to breakthroughs in many areas of technology, nanophotonics is capturing the interest of many researchers from different fields. This Special Issue of Applied Sciences on “Recent advances and future trends in nanophotonics” aims to give an overview on the latest developments in nanophotonics and its roles in different application domains. Topics of discussion include, but are not limited to, the exploration of new directions of nanophotonic science and technology that enable technological breakthroughs in high-impact areas mainly regarding diffraction elements, detection, imaging, spectroscopy, optical communications, and computing