Point-Based Rendering for Homogeneous Participating Media with Refractive Boundaries

International audienceIllumination effects in translucent materials are a combination of several physical phenomena: refraction at the surface, absorption and scattering inside the material. Because refraction can focus light deep inside the material, where it will be scattered, practical illumination simulation inside translucent materials is difficult. In this paper, we present an a Point-Based Global Illumination method for light transport on homogeneous translucent materials with refractive boundaries. We start by placing light samples inside the translucent material and organizing them into a spatial hierarchy. At rendering, we gather light from these samples for each camera ray. We compute separately the sample contributions for single, double and multiple scattering, and add them. We present two implementations of our algorithm: an offline version for high-quality rendering and an interactive GPU implementation. The offline version provides significant speed-ups and reduced memory footprints compared to state-of-the-art algorithms, with no visible impact on quality. The GPU version yields interactive frame rates: 30 fps when moving the viewpoint, 25 fps when editing the light position or the material parameters

Accurate computation of single scattering in participating media with refractive boundaries

International audienceVolume caustics are high-frequency effects appearing in participating media with low opacity, when refractive interfaces are focusing the light rays. Refractions make them hard to compute, since screen locality does not correlate with spatial locality in the medium. In this paper we give a new method for accurate computation of single scattering effects in a participating media enclosed by refractive interfaces. Our algorithm is based on the observation that although radiance along each camera ray is irregular, contributions from individual triangles are smooth. Our method gives more accurate results than existing methods, faster. It uses minimal information and requires no precomputation or additional data structures

A Dual-Beam Method-of-Images 3D Searchlight BSSRDF

We present a novel BSSRDF for rendering translucent materials. Angular effects lacking in previous BSSRDF models are incorporated by using a dual-beam formulation. We employ a Placzek's Lemma interpretation of the method of images and discard diffusion theory. Instead, we derive a plane-parallel transformation of the BSSRDF to form the associated BRDF and optimize the image confiurations such that the BRDF is close to the known analytic solutions for the associated albedo problem. This ensures reciprocity, accurate colors, and provides an automatic level-of-detail transition for translucent objects that appear at various distances in an image. Despite optimizing the subsurface fluence in a plane-parallel setting, we find that this also leads to fairly accurate fluence distributions throughout the volume in the original 3D searchlight problem. Our method-of-images modifications can also improve the accuracy of previous BSSRDFs.Comment: added clarifying text and 1 figure to illustrate the metho

Neural Relightable Participating Media Rendering

Learning neural radiance fields of a scene has recently allowed realistic novel view synthesis of the scene, but they are limited to synthesize images under the original fixed lighting condition. Therefore, they are not flexible for the eagerly desired tasks like relighting, scene editing and scene composition. To tackle this problem, several recent methods propose to disentangle reflectance and illumination from the radiance field. These methods can cope with solid objects with opaque surfaces but participating media are neglected. Also, they take into account only direct illumination or at most one-bounce indirect illumination, thus suffer from energy loss due to ignoring the high-order indirect illumination. We propose to learn neural representations for participating media with a complete simulation of global illumination. We estimate direct illumination via ray tracing and compute indirect illumination with spherical harmonics. Our approach avoids computing the lengthy indirect bounces and does not suffer from energy loss. Our experiments on multiple scenes show that our approach achieves superior visual quality and numerical performance compared to state-of-the-art methods, and it can generalize to deal with solid objects with opaque surfaces as well.Comment: Accepted to NeurIPS 202

Tracing Analytic Ray Curves for Light and Sound Propagation in Non-Linear Media

The physical world consists of spatially varying media, such as the atmosphere and the ocean, in which light and sound propagates along non-linear trajectories. This presents a challenge to existing ray-tracing based methods, which are widely adopted to simulate propagation due to their efficiency and flexibility, but assume linear rays. We present a novel algorithm that traces analytic ray curves computed from local media gradients, and utilizes the closed-form solutions of both the intersections of the ray curves with planar surfaces, and the travel distance. By constructing an adaptive unstructured mesh, our algorithm is able to model general media profiles that vary in three dimensions with complex boundaries consisting of terrains and other scene objects such as buildings. Our analytic ray curve tracer with the adaptive mesh improves the efficiency considerably over prior methods. We highlight the algorithm's application on simulation of visual and sound propagation in outdoor scenes

Fluids real-time rendering

In this thesis the existing methods for realistic visualization of uids in real-time are reviewed. The correct handling of the interaction of light with a uid surface can highly increase the realism of the rendering, therefore method for physically accurate rendering of re ections and refractions will be used. The light- uid interaction does not stop at the surface, but continues inside the uid volume, causing caustics and beams of light. The simulation of uids require extremely time-consuming processes to achieve physical accuracy and will not be explored, although the main concepts will be given. Therefore, the main goals of this work are: Study and review the existing methods for rendering uids in realtime. Find a simpli ed physical model of light interaction, because a complete physically correct model would not achieve real-time. Develop an application that uses the found methods and the light interaction model

Image based analysis of visibility in smoke laden environments

This study investigates visibility in a smoke laden environment. For many years, researchers and engineers in fire safety have criticized the inadequacy of existing theory in describing the effects such as colour, viewing angle, environmental lighting etc. on the visibility of an emergency sign. In the current study, the author has raised the fundamental question on the concept of visibility and how it should be measured in fire safety engineering and tried to address the problem by redefining visibility based on the perceived image of a target sign. New algorithms have been created during this study to utilise modern hardware and software technology in the simulation of human perceived image of object in both experiment and computer modelling. Unlike the traditional threshold of visual distance, visibility in the current study has been defined as a continuous function changing from clearly discemable to completely invisible. It allows the comparison of visibility under various conditions, not just limited to the threshold. Current experiment has revealed that different conditions may results in the same visual threshold but follow very different path on the way leading to the threshold. The new definition of visibility has made the quantification of visibility in the pre-threshold conditions possible. Such quantification can help to improve the performance of fire evacuation since most evacuees will experience the pre-threshold condition. With current measurement of visibility, all the influential factors such as colour, viewing angle etc. can be tested in experiment and simulated in numerical model. Based on the newly introduced definition of visibility, a set of experiments have been carried output in a purposed built smoke tunnel. Digital camera images of various illuminated signs were taken under different illumination, colour and smoke conditions. Using an algorithm developed by the author in this study, the digital camera images were converted into simulated human perceived images. The visibility of a target sign is measured against the quality of its image acquired. Conclusions have been drawn by comparing visibility under different conditions. One of them is that signs illuminated with red and green lights have the similar visibility that is far better than that with blue light. It is the first time this seemingly obvious conclusion has been quantified. In the simulation of visibility in participating media, the author has introduced an algorithm that combines irradiance catching in 3D space with Monte Carlo ray tracing. It can calculate the distribution of scattered radiation with good accuracy without the high cost typically related to zonal method and the limitations in discrete ordinate method. The algorithm has been combined with a two pass solution method to produce high resolution images without introducing excessive number of rays from the light source. The convergence of the iterative solution procedure implemented has been theoretically proven. The accuracy of the model is demonstrated by comparing with the analytical solution of a point radiant source in 3D space. Further validation of the simulation model has been carried out by comparing the model prediction with the data from the smoke tunnel experiments. The output of the simulation model has been presented in the form of an innovative floor map of visibility (FMV). It helps the fire safety designer to identify regions of poor visibility in a glance and will prove to be a very useful tool in performance based fire safety design

Image based analysis of visibility in smoke laden environments

This study investigates visibility in a smoke laden environment. For many years, researchers and engineers in fire safety have criticized the inadequacy of existing theory in describing the effects such as colour, viewing angle, environmental lighting etc. on the visibility of an emergency sign. In the current study, the author has raised the fundamental question on the concept of visibility and how it should be measured in fire safety engineering and tried to address the problem by redefining visibility based on the perceived image of a target sign. New algorithms have been created during this study to utilise modern hardware and software technology in the simulation of human perceived image of object in both experiment and computer modelling. Unlike the traditional threshold of visual distance, visibility in the current study has been defined as a continuous function changing from clearly discemable to completely invisible. It allows the comparison of visibility under various conditions, not just limited to the threshold. Current experiment has revealed that different conditions may results in the same visual threshold but follow very different path on the way leading to the threshold. The new definition of visibility has made the quantification of visibility in the pre-threshold conditions possible. Such quantification can help to improve the performance of fire evacuation since most evacuees will experience the pre-threshold condition. With current measurement of visibility, all the influential factors such as colour, viewing angle etc. can be tested in experiment and simulated in numerical model.Based on the newly introduced definition of visibility, a set of experiments have been carried output in a purposed built smoke tunnel. Digital camera images of various illuminated signs were taken under different illumination, colour and smoke conditions. Using an algorithm developed by the author in this study, the digital camera images were converted into simulated human perceived images. The visibility of a target sign is measured against the quality of its image acquired. Conclusions have been drawn by comparing visibility under different conditions. One of them is that signs illuminated with red and green lights have the similar visibility that is far better than that with blue light. It is the first time this seemingly obvious conclusion has been quantified.In the simulation of visibility in participating media, the author has introduced an algorithm that combines irradiance catching in 3D space with Monte Carlo ray tracing. It can calculate the distribution of scattered radiation with good accuracy without the high cost typically related to zonal method and the limitations in discrete ordinate method. The algorithm has been combined with a two pass solution method to produce high resolution images without introducing excessive number of rays from the light source. The convergence of the iterative solution procedure implemented has been theoretically proven. The accuracy of the model is demonstrated by comparing with the analytical solution of a point radiant source in 3D space. Further validation of the simulation model has been carried out by comparing the model prediction with the data from the smoke tunnel experiments.The output of the simulation model has been presented in the form of an innovative floor map of visibility (FMV). It helps the fire safety designer to identify regions of poor visibility in a glance and will prove to be a very useful tool in performance based fire safety design

Fast Computation of Single Scattering in Participating Media with Refractive Boundaries using Frequency Analysis

International audienceMany materials combine a refractive boundary and a participating media on the interior. If the material has a low opacity, single scattering effects dominate in its appearance. Refraction at the boundary concentrates the incoming light, resulting in an important phenomenon called volume caustics. This phenomenon is hard to simulate. Previous methods used point-based light transport, but attributed point samples inefficiently, resulting in long computation time. In this paper, we use frequency analysis of light transport to allocate point samples efficiently. Our method works in two steps: in the first step, we compute volume samples along with their covariance matrices, encoding the illumination frequency content in a compact way. In the rendering step, we use the covariance matrices to compute the kernel size for each volume sample: small kernel for high-frequency single scattering, large kernel for lower frequencies. Our algorithm computes volume caustics with fewer volume samples, with no loss of quality. Our method is both faster and uses less memory than the original method. It is roughly twice as fast and uses one fifth of the memory. The extra cost of computing covariance matrices for frequency information is negligible

Precomputed Multiple Scattering for Rapid Light Simulation in Participating Media

International audienceRendering translucent materials is costly: light transport algorithms need to simulate a large number of scattering events inside the material before reaching convergence. The cost is especially high for materials with a large albedo or a small mean-free-path, where higher-order scattering effects dominate. We present a new method for fast computation of global illumination with participating media. Our method uses precomputed multiple scattering effects, stored in two compact tables. These precomputed multiple scattering tables are easy to integrate with any illumination simulation algorithm. We give examples for virtual ray lights (VRL), photon mapping with beams and paths (UPBP), Metropolis Light Transport with Manifold Exploration (MEMLT). The original algorithms are in charge of low-order scattering, combined with multiple scattering computed using our table. Our results show significant improvements in convergence speed and memory costs, with negligible impact on accuracy