768 research outputs found

    Design and implementation of UAV performance validation system

    Get PDF
    Abstract. This thesis aims for design and implementation of a system for drone performance measurements, which can be used for validation of different drones for research projects accordingly. Additionally, the device should be able to be used as a part of a hardware-in-loop -system with simulators in drone research. The primary goal for this thesis is to build a system which helps to document different drone properties efficiently and safely. This is done with a system that consists of a robust frame, a force and torque measuring transducer, a drone stabilizing unit, a data logging system, and a remote-control power supply. For controlling the system, user interface was created to control the data stream, the drone stabilizing unit, and the power supply. This thesis includes a literature review of drone general classification properties and legal regulations. Short review of drone usage and selection criteria in industry and research is conducted, as well as in-depth review of the drone components and their relation to overall performance of the drone. The thesis also contains literature review of force and torque measuring theory, and other drone performance measuring units. The functionality of the designed unit is tested by building a drone from spare components, and valuating its performance based on e.g., lift generation, power consumption and visual behavior of the drone. Measured data is documented, and with the documents, drone’s suitability for future research projects can be assessed. According to the results, the unit can be used to evaluate drone’s performance, and groundwork for Hardware-in-loop simulator connection for drone research. The testing unit and the data recordings as well as the built testing drone stays within the research facility for further development.UAV testausjärjestelmän suunnittelu ja toteutus. Tiivistelmä. Tässä diplomityössä suunnitellaan ja valmistetaan droonien suorituskykyä mittaava tutkimuslaitteisto, jonka avulla voidaan arvioida erilaisten droonien soveltuvuutta tutkimusprojekteihin tapauskohtaisesti. Työssä tavoitellaan helppokäyttöistä järjestelmää, jonka avulla itse tehtyjen droonien ominaisuuksia voidaan dokumentoida turvallisesti ja tehokkaasti. Työssä perehdytään droonien luokitteluun tutustumalla voimassa oleviin säädöksiin, sekä droonin suorituskykyä kuvaaviin ominaisuuksiin. Työssä tarkastellaan droonien käyttöä eri aloilla arvioiden esiin nousseita droonin valintaperusteita ja ominaisuuksia. Tämän jälkeen tutustutaan droonien rakenteeseen ja ominaisuuksiin. Voiman mittauksen teoriaan sekä kehitettyihin mittausmenetelmiin tutustutaan tukemaan anturivalintaa. Suunniteltu järjestelmä koostuu tukevasta rungosta, voiman mittaukseen soveltuvasta anturista, droonin vakauttamisen kokonaisuudesta, datan keräysjärjestelmästä sekä etäohjattavasta virtalähteestä. Laitteiston ohjaukseen luotiin rajapinta, jonka kautta järjestelmää voidaan hallita. Järjestelmän toimivuus todettiin kahdella mittauskäyttöön soveltuvalla droonilla, joiden suorituskykyä arvioitiin droonien ominaisuuksien, sekä visuaalisen käyttäytymisen avulla. Mittauksien tulokset dokumentoitiin, ja dokumentaation perusteella voidaan arvioida sekä tutkimuslaitteiston toimivuutta, että mitattujen droonien soveltuvuutta tulevissa tutkimusprojekteissa. Mittausten perusteella voidaan todeta laitteen soveltuvan droonien suorituskyvyn mittaamiseen, sekä pohjatyöksi simulaattorikytkentään. Mittalaitteisto sekä mittaustulokset jäävät Biomimetiikka ja älykkäät järjestelmät -tutkimusyksikön käyttöön droonitutkimuksen tueksi

    Synopsis of lectures on the subject «Special technologies in mechanical engineering» for students of all forms of study Direction of preparation 131 " Applied mechanics"

    Get PDF
    1. METHODS OF PROCESSING STRUCTURAL MATERIALS 5 2. BASIC INFORMATION ABOUT METAL CUTTING AND METAL CUTTING MACHINES 15 3. METHODS OF RESTORATION OF PARTS 24 4. MAIN PARTS AND ELEMENTS OF THE CUTTER, ITS GEOMETRIC PARAMETERS 29 5. GEOMETRY OF CUTTERS 35 6. ELEMENTS OF CUTTING AND CUT LAYER 39 7. TECHNOLOGY OF PROCESSING BODY PARTS ON AUTOMATED MACHINES 44 8. TECHNOLOGY OF SHAFT PROCESSING 53 9. METHODS FOR FORMATION OF BASIC SURFACES OF CORRESPONDING PARTS 75 10. LITERATURE 9

    Development of the control system of a low-cost robot for upper limb home rehabilitation of stroke patents

    Get PDF
    Stroke is the leading cause of disability in the UK and is expected to increase in prevalence due to an aging population. Stroke patient outcome is improved by early and intense physiotherapy after Stroke, but NHS services are increasingly under strain, particularly in the wake of the COVID 19 pandemic. Over the last thirty years there has been a great deal of development in the use of robotic devices to provide rehabilitation to Stroke patients. The system architecture of a rehabilitation robot is well defined, with a High-Level Controller generating rehabilitation tasks, a trajectory generation procedure to encode the tasks and a Low-Level Controller to implement the tasks. All commercially available rehabilitation robots are high cost, however, and a recent study has found that the cost benefit ratio is too poor to be viable [1]. Further to this, in the wake of the pandemic there has been increased interest in home-based devices. There has been research into low cost devices, but this area of research has not been sufficiently explored. MyPAM is low-cost upper-limb rehabilitation robot designed for home use. There have been two previous iterations, and the first version of MyPAM was proven to improve the outcome of Stroke patients in trials. The current system has been rearchitected, with much focus on the Low Level controller which has been implemented on lower cost hardware than previous iterations. Responsibility for trajectory generation has been moved from the High-Level controller to the Low level controller, and a novel method for affecting the trajectory with Attractors and Repulsors has been designed and validated, which has important implications on patient motivation. A multidomain dynamic model is presented, which is necessary for creating a baseline against which to compare patient performance. A novel integrated end-effector/2-axis force sensor and a novel end-effector/Tristate grip sensor are presented, both based on the MagOne sensing methodology. An Admittance controller with instability protection is presented, and the system integration is discussed

    User-Centered Modelling and Design of Assistive Exoskeletons

    Get PDF

    Micro/Nano Structures and Systems

    Get PDF
    Micro/Nano Structures and Systems: Analysis, Design, Manufacturing, and Reliability is a comprehensive guide that explores the various aspects of micro- and nanostructures and systems. From analysis and design to manufacturing and reliability, this reprint provides a thorough understanding of the latest methods and techniques used in the field. With an emphasis on modern computational and analytical methods and their integration with experimental techniques, this reprint is an invaluable resource for researchers and engineers working in the field of micro- and nanosystems, including micromachines, additive manufacturing at the microscale, micro/nano-electromechanical systems, and more. Written by leading experts in the field, this reprint offers a complete understanding of the physical and mechanical behavior of micro- and nanostructures, making it an essential reference for professionals in this field

    Bio-Inspired Soft Artificial Muscles for Robotic and Healthcare Applications

    Full text link
    Soft robotics and soft artificial muscles have emerged as prolific research areas and have gained substantial traction over the last two decades. There is a large paradigm shift of research interests in soft artificial muscles for robotic and medical applications due to their soft, flexible and compliant characteristics compared to rigid actuators. Soft artificial muscles provide safe human-machine interaction, thus promoting their implementation in medical fields such as wearable assistive devices, haptic devices, soft surgical instruments and cardiac compression devices. Depending on the structure and material composition, soft artificial muscles can be controlled with various excitation sources, including electricity, magnetic fields, temperature and pressure. Pressure-driven artificial muscles are among the most popular soft actuators due to their fast response, high exertion force and energy efficiency. Although significant progress has been made, challenges remain for a new type of artificial muscle that is easy to manufacture, flexible, multifunctional and has a high length-to-diameter ratio. Inspired by human muscles, this thesis proposes a soft, scalable, flexible, multifunctional, responsive, and high aspect ratio hydraulic filament artificial muscle (HFAM) for robotic and medical applications. The HFAM consists of a silicone tube inserted inside a coil spring, which expands longitudinally when receiving positive hydraulic pressure. This simple fabrication method enables low-cost and mass production of a wide range of product sizes and materials. This thesis investigates the characteristics of the proposed HFAM and two implementations, as a wearable soft robotic glove to aid in grasping objects, and as a smart surgical suture for perforation closure. Multiple HFAMs are also combined by twisting and braiding techniques to enhance their performance. In addition, smart textiles are created from HFAMs using traditional knitting and weaving techniques for shape-programmable structures, shape-morphing soft robots and smart compression devices for massage therapy. Finally, a proof-of-concept robotic cardiac compression device is developed by arranging HFAMs in a special configuration to assist in heart failure treatment. Overall this fundamental work contributes to the development of soft artificial muscle technologies and paves the way for future comprehensive studies to develop HFAMs for specific medical and robotic requirements

    Advanced Fault Diagnosis and Health Monitoring Techniques for Complex Engineering Systems

    Get PDF
    Over the last few decades, the field of fault diagnostics and structural health management has been experiencing rapid developments. The reliability, availability, and safety of engineering systems can be significantly improved by implementing multifaceted strategies of in situ diagnostics and prognostics. With the development of intelligence algorithms, smart sensors, and advanced data collection and modeling techniques, this challenging research area has been receiving ever-increasing attention in both fundamental research and engineering applications. This has been strongly supported by the extensive applications ranging from aerospace, automotive, transport, manufacturing, and processing industries to defense and infrastructure industries
    corecore