Design and control of soft rehabilitation robots actuated by pneumatic muscles: State of the art

Robot-assisted rehabilitation has become a new mainstream trend for the treatment of stroke patients with movement disability. Pneumatic muscle (PM) is one of the most promising actuators for rehabilitation robots, due to its inherent compliance and safety features. In this paper, we conduct a systematic review on the soft rehabilitation robots driven by pneumatic muscles. This review discusses up to date mechanical structures and control strategies for PMs-actuated rehabilitation robots. A variety of state-of-the-art soft rehabilitation robots are classified and reviewed according to the actuation configurations. Special attentions are paid to control strategies under different mechanical designs, with advanced control approaches to overcome PM’s highly nonlinear and time-varying behaviors and to enhance the adaptability to different patients. Finally, we analyze and highlight the current research gaps and the future directions in this field, which is potential for providing a reliable guidance on the development of advanced soft rehabilitation robots

Compliance adaptation of an intrinsically soft ankle rehabilitation robot driven by pneumatic muscles

Pneumatic muscles (PMs)-driven robots become more and more popular in medical and rehabilitation field as the actuators are intrinsically complaint and thus are safer for patients than traditional rigid robots. This paper proposes a new compliance adaptation method of a soft ankle rehabilitation robot that is driven by four pneumatic muscles enabling three rotational movement degrees of freedom (DoFs). The stiffness of a PM is dominated by the nominal pressure. It is possible to control the robot joint compliance independently of the robot movement in task space. The controller is designed in joint space to regulate the compliance property of the soft robot by tuning the stiffness of each active link. Experiments in actual environment were conducted to verify the control scheme and results show that the robot compliance can be adjusted when provided changing nominal pressures and the robot assistance output can be regulated, which provides a feasible solution to implement the patient-cooperative training strategy

Application of rubber artificial muscle manipulator as a rehabilitation robot

The application of a robot to rehabilitation has become a matter of great concern. This paper deals with functional recovery therapy, one important aspect of physical rehabilitation. Single-joint therapy machines have already been achieved. However, for more efficient therapy, multjoint robots are necessary to achieve more realistic motion patterns. This kind of robot must have a high level of safety for humans. A pneumatic actuator may be available for such a robot, because of the compliance of compressed air. A pneumatic rubber artificial muscle manipulator has been applied to construct a therapy robot with two degrees of freedom (DOF). Also, an impedance control strategy is employed to realize various motion modes for the physical therapy modes. Further, for efficient rehabilitation, it is desirable to comprehend the physical condition of the patient. Thus, the mechanical impedance of the human arm is used as an objective evaluation of recovery, and an estimation method is proposed. Experiments show the suitability of the proposed rehabilitation robot system </p

Hubungan di antara pengaturan kerja fleksibel dan prestasi pekerja dalam kalangan ejen insurans wanita

Ejen insurans merupakan jurujual pertengahan bagi syarikat insurans di mana mereka memainkan peranan penting dalam memberi khidmat nasihat kewangan (Hannah, 2011). Ejen insurans bekerja berdasarkan persekitaran pengaturan kerja yang fleksibel di mana mereka boleh menyediakan jadual waktu bekerja sendiri. Sebahagian daripada mereka bertemu dengan pelanggan pada waktu perniagaan siang hari, sementara yang lain pula membuat kertas kerja dan menyediakan konsultasi untuk pelanggan pada waktu petang. Kebanyakan mereka bekerja selama 40 jam seminggu dan ada juga beberapa ejen yang bekerja lebih lama daripada 40 jam (Hannah, 2011). Prestasi ejen insurans sangat penting untuk mengekalkan jenama produk insurans. Penilaian terhadap prestasi di kalangan ejen insurans biasanya bergantung kepada kejayaan atau kegagalan mencapai sasaran penjualan (Insurance Agent Job Overview, 2019). Proses menjual produk insurans memerlukan masa kerana mereka perlu mendekati pelanggan sebanyak mungkin dan ketersediaan waktu bekerja yang tidak tetap

Soft Pneumatic Gelatin Actuator for Edible Robotics

We present a fully edible pneumatic actuator based on gelatin-glycerol composite. The actuator is monolithic, fabricated via a molding process, and measures 90 mm in length, 20 mm in width, and 17 mm in thickness. Thanks to the composite mechanical characteristics similar to those of silicone elastomers, the actuator exhibits a bending angle of 170.3 {\deg} and a blocked force of 0.34 N at the applied pressure of 25 kPa. These values are comparable to elastomer based pneumatic actuators. As a validation example, two actuators are integrated to form a gripper capable of handling various objects, highlighting the high performance and applicability of the edible actuator. These edible actuators, combined with other recent edible materials and electronics, could lay the foundation for a new type of edible robots.Comment: Submitted to IEEE/RSJ International Conference on Intelligent Robots and Systems 201

Sliding Mode Control With PID Sliding Surface for Active Vibration Damping of Pneumatically Actuated Soft Robots

This paper proposes a novel active vibration damping mechanism for soft robots. In recent years, soft robots have gained increasing research attention for robotic researchers and industrial developers alike. Soft robots offer a significant number of advantages when it comes to the handling of fragile objects, clinical rehabilitation tasks, and human-machine interaction. Soft robots demonstrate a high degree of compliance and safety because of their inherent softness, achieving the same with rigid robots will require intricate controller design and sensing mechanisms. However, the most commonly used soft robots use pneumatic systems for actuation. These pneumatic soft robots undergo large amplitude vibrations when deactuated suddenly. These vibrations not only decrease the accuracy of these soft robots but also compromise their structural integrity, which results in a decrease in their useable lifespan. An active vibration damping mechanism is very much needed to increase the utility of soft robots in industrial applications. To accurately control the dynamic behavior of soft robots, we propose a sliding mode based controller with PID sliding surface. The proposed controller uses feedback error to define a PID sliding surface, and a nonlinear sliding mode controller works to keep the system attached to the sliding surface. The coefficients of the PID sliding surface determine the dynamic behavior of the soft robot. The performance of the proposed controller is verified by using a multi-chambered parallel soft robot. The experimental results demonstrate that the proposed controller can suppress vibration amplitude to a decidedly smaller range

Which is the best PID variant for pneumatic soft robots an experimental study

This paper presents an experimental study to compare the performance of model-free control strategies for pneumatic soft robots. Fabricated using soft materials, soft robots have gained much attention in academia and industry during recent years because of their inherent safety in human interaction. However, due to structural flexibility and compliance, mathematical models for these soft robots are nonlinear with an infinite degree of freedom (DOF). Therefore, accurate position (or orientation) control and optimization of their dynamic response remains a challenging task. Most existing soft robots currently employed in industrial and rehabilitation applications use model-free control algorithms such as PID. However, to the best of our knowledge, there has been no systematic study on the comparative performance of model-free control algorithms and their ability to optimize dynamic response, i.e., reduce overshoot and settling time. In this paper, we present comparative performance of several variants of model-free PID-controllers based on extensive experimental results. Additionally, most of the existing work on model-free control in pneumatic soft-robotic literature use manually tuned parameters, which is a time-consuming, labor-intensive task. We present a heuristic-based coordinate descent algorithm to tune the controller parameter automatically. We presented results for both manual tuning and automatic tuning using the Ziegler–Nichols method and proposed algorithm, respectively. We then used experimental results to statistically demonstrate that the presented automatic tuning algorithm results in high accuracy. The experiment results show that for soft robots, the PID-controller essentially reduces to the PI controller. This behavior was observed in both manual and automatic tuning experiments; we also discussed a rationale for removing the derivative term

N<i>e</i>XOS – the design, development and evaluation of a rehabilitation system for the lower limbs

Recent years have seen the development of a number of automated and semi-automated systems to support for physiotherapy and rehabilitation. These deploy a range of technologies from highly complex purpose built systems to approaches based around the use of industrial robots operating either individually or in combination for applications ranging from stroke to mobility enhancement. The NeXOS project set out to investigate an approach to the rehabilitation of the lower limbs in a way which brought together expertise in engineering design and mechatronics with specilists in rehabilitation and physiotherapy. The resulting system has resulted in a prototype of a system which is capable in operating in a number of modes from fully independent to providing direct support to a physiotherapist during manipulation of the limb. Designed around a low cost approach for an implementation ultimately capable of use in a patients home using web-baased strategies for communication with their support team, the prototype NeXOS system has validated the adoption of an integrated approach to its development. The paper considers this design and development process and provides the results from the initial tests with physiotherapists to establish the operational basis for clinical implementation