Schedulability analysis of timed CSP models using the PAT model checker

Timed CSP can be used to model and analyse real-time and concurrent behaviour of embedded control systems. Practical CSP implementations combine the CSP model of a real-time control system with prioritized scheduling to achieve efficient and orderly use of limited resources. Schedulability analysis of a timed CSP model of a system with respect to a scheduling scheme and a particular execution platform is important to ensure that the system design satisfies its timing requirements. In this paper, we propose a framework to analyse schedulability of CSP-based designs for non-preemptive fixed-priority multiprocessor scheduling. The framework is based on the PAT model checker and the analysis is done with dense-time model checking on timed CSP models. We also provide a schedulability analysis workflow to construct and analyse, using the proposed framework, a timed CSP model with scheduling from an initial untimed CSP model without scheduling. We demonstrate our schedulability analysis workflow on a case study of control software design for a mobile robot. The proposed approach provides non-pessimistic schedulability results

S+Net: extending functional coordination with extra-functional semantics

This technical report introduces S+Net, a compositional coordination language for streaming networks with extra-functional semantics. Compositionality simplifies the specification of complex parallel and distributed applications; extra-functional semantics allow the application designer to reason about and control resource usage, performance and fault handling. The key feature of S+Net is that functional and extra-functional semantics are defined orthogonally from each other. S+Net can be seen as a simultaneous simplification and extension of the existing coordination language S-Net, that gives control of extra-functional behavior to the S-Net programmer. S+Net can also be seen as a transitional research step between S-Net and AstraKahn, another coordination language currently being designed at the University of Hertfordshire. In contrast with AstraKahn which constitutes a re-design from the ground up, S+Net preserves the basic operational semantics of S-Net and thus provides an incremental introduction of extra-functional control in an existing language.Comment: 34 pages, 11 figures, 3 table

Optimal dimensional synthesis of force feedback lower arm exoskeletons

This paper presents multi-criteria design optimization of parallel mechanism based force feedback exoskeletons for human forearm and wrist. The optimized devices are aimed to be employed as a high fidelity haptic interfaces. Multiple design objectives are discussed and classified for the devices and the optimization problem to study the trade-offs between these criteria is formulated. Dimensional syntheses are performed for optimal global kinematic and dynamic performance, utilizing a Pareto front based framework, for two spherical parallel mechanisms that satisfy the ergonomic necessities of a human forearm and wrist. Two optimized mechanisms are compared and discussed in the light of multiple design criteria. Finally, kinematic structure and dimensions of an optimal exoskeleton are decided

From RT-LOTOS to Time Petri Nets new foundations for a verification platform

The formal description technique RT-LOTOS has been selected as intermediate language to add formality to a real-time UML profile named TURTLE. For this sake, an RT-LOTOS verification platform has been developed for early detection of design errors in real-time system models. The paper discusses an extension of the platform by inclusion of verification tools developed for Time Petri Nets. The starting point is the definition of RT-LOTOS to TPN translation patterns. In particular, we introduce the concept of components embedding Time Petri Nets. The translation patterns are implemented in a prototype tool which takes as input an RT-LOTOS specification and outputs a TPN in the format admitted by the TINA tool. The efficiency of the proposed solution has been demonstrated on various case studies

Design and motion control of a 6-UPS fully parallel robot for long bone fracture reduction : a thesis presented in partial fulfillment of the requirements for the degree of Master of Engineering in Mechatronics at Massey University

The incidences of long bone fractures in New Zealand are approximately 1 in 10,000. Long bones such as tibia and femur have complicated anatomic structures, making the realignment of these long bone fractures reliant on the skill of the surgeon. The drawbacks of current practice result in long time exposure to radiation, slow recovery and possible morbidity. A semi-automated long bone fracture reduction system based on a 6-DOF parallel robot platform has been in development since 2004. The developed 6-DOF parallel robot platform comprises of six linear actuators with rotary incremental encoders. To implement a realignment of long bone fractures, a framework for the 6-DOF platform robot has been developed. The inverse kinematics and singularity of the 6-DOF parallel robot has been studied to obtain the actions and Jacobin matrices. In motion control a multiple axis motion controller and amplifiers were used for 6-DOF parallel robot. PID tuning algorithms were developed based on the combination of the general tuning result and the contour control principle. The PID parameters have been validated by a number of experiments. The practical realignment of bone fractures requires a "Pull-Rotate-Push" action implemented by the 6-DOF parallel robot. After calibration, the reduction trajectories were generated accurately. The actual trials on the artificial fractures have shown that the robot developed is capable of performing the required reduction motion

Pattern-based software architecture for service-oriented software systems

Service-oriented architecture is a recent conceptual framework for service-oriented software platforms. Architectures are of great importance for the evolution of software systems. We present a modelling and transformation technique for service-centric distributed software systems. Architectural configurations, expressed through hierarchical architectural patterns, form the core of a specification and transformation technique. Patterns on different levels of abstraction form transformation invariants that structure and constrain the transformation process. We explore the role that patterns can play in architecture transformations in terms of functional properties, but also non-functional quality aspects