Ellipsometric characterization of Bi and Al2O3 coatings for plasmon excitation in an optical fiber sensor

The authors present the results of the ellipsometric characterization of thin layers of bismuth and aluminum oxide deposited over the waist of a tapered optical fiber by pulsed laser deposition. The characteristics of the deposits are studied by spectroscopic ellipsometry. From the effective thicknesses determined by the ellipsometric characterization, it is shown by simulations that surface plasmon resonances (SPRs) can occur in the fiber device, and it is demonstrated experimentally. These results show the feasibility of employing bismuth as a plasmonic material in SPR fiber sensors based on doubly-deposited uniform-waist tapered optical fibers, which show excellent performance and versatility

Surface plasmon resonance in the visible region in sensors based on tapered optical fibers

Doubly deposited uniform-waist tapered optical fibers (DLUWTs) have shown their versatility and good performance as basis for surface plasmon resonance (SPR) sensors for a variety of wavelength ranges. In this work we experimentally show how these devices can be employed to extend the technology of SPR fiber sensors to the visible region, down to about 530 nm, with remarkable results in terms of sensitivity, plasmon definition and the availability of multiple plasmon resonances for each configuration. In this way, DLUWTs can be used to cover a range of more than 1000 nm for aqueous media only by changing the thickness of the deposits. Also, it is shown how these results can be used with the so-called absorption method to make selective the response of the sensors and a study is made on the influence of the taper waist in the performance of the devices. The number of SPR fiber sensors working in the visible region, of great interest in biological research, that have been depicted in the literature is very small, and the sensors that we present here notably improve their performance

Engineering Optical Properties using Plasmonic Nanostructures

Plasmonic nanostructures can be engineered to take on unusual optical properties not found in natural materials. The optical responses of plasmonic materials are functions of the structural parameters and symmetry of the nanostructures, material parameters of the nanostructure and its surroundings and the incidence angle, frequency and polarization state of light. The scattering and hence the visibility of an object could be reduced by coating it with a plasmonic material. In this thesis, presented is an optical frequency scattering cancelation device composed of a silicon nanorod coated by a plasmonic gold nanostructure. The principle of operation was theoretically analyzed using Mie theory and the device design was verified by extensive numerical simulations. The device was fabricated using a combination of nanofabrication techniques such as electron beam lithography and focused ion beam milling. The optical responses of the scattering cancelation device and a control sample of bare silicon rod were directly visualized using near-field microscopy coupled with heterodyne interferometric detection. The experimental results were analyzed and found to match very well with theoretical prediction from numerical simulations thereby validating the design principles and our implementation. Plasmonic nanostructures could be engineered to exhibit unique optical properties such as Fano resonance characterized by narrow asymmetrical lineshape. We present dynamic tuning and symmetry lowering of Fano resonances in plasmonic nanostructures fabricated on flexible substrates. The tuning of Fano resonance was achieved by application of uniaxial mechanical stress. The design of the nanostructures was facilitated by extensive numerical simulations and the symmetry lowering was analyzed using group theoretical methods. The nanostructures were fabricated using electron beam lithography and optically characterized for various mechanical stress. The experimental results were in good agreement with the numerical simulations. The mechanically tunable plasmonic nanostructure could serve as a platform for dynamically tunable nanophotonic devices such as sensors and tunable filters

Gold-coated split laser-induced periodic surface structures as refractometric sensors

The generation of surface plasmon resonances (SPR) in laser-induced periodic surface structures (LIPSS) allows their application in the field of optical sensing, such as the detection of refractive index variations in gases and liquids. We have fabricated gold-coated LIPSS nanostructures on stainless steel substrates by using femtosecond laser nano-ablation. This technique is a low-cost and high-throughput fabrication method applicable to fast and large-scale manufacturing. The depth profile of the fabricated LIPSS shows a central dip at the top of each ripple that split the geometry. The actual topography is modeled and included in a computational electromagnetism package to obtain the expected optical response under the experimental conditions. The measured and simulated spectral reflectances are compared, and the differences are explained by the departure of the fabricated LIPSS from the ideal topography. The experiments and simulations showed excellent agreement for the main spectral characteristics, like the Fano-like lineshapes of the spectral reflectance. This fitting provides the values used to determine the refractometric performance of the fabricated device, that shows a sensitivity of 518 nm/RIU and a figure of merit of 32 RIU−1 for an aqueous analyte. Our experimental results show that the fabricated devices are competitive in terms of cost and simplicity when compared to existing devices with similar performance

Tapered optical fibre sensors: current trends and future perspectives

The development of reliable, affordable and efficient sensors is a key step in providing tools for efficient monitoring of critical environmental parameters. This review focuses on the use of tapered optical fibres as an environmental sensing platform. Tapered fibres allow access to the evanescent wave of the propagating mode, which can be exploited to facilitate chemical sensing by spectroscopic evaluation of the medium surrounding the optical fibre, by measurement of the refractive index of the medium, or by coupling to other waveguides formed of chemically sensitive materials. In addition, the reduced diameter of the tapered section of the optical fibre can offer benefits when measuring physical parameters such as strain and temperature. A review of the basic sensing platforms implemented using tapered optical fibres and their application for development of fibre-optic physical, chemical and bio-sensors is presented

Glassy Materials Based Microdevices

Microtechnology has changed our world since the last century, when silicon microelectronics revolutionized sensor, control and communication areas, with applications extending from domotics to automotive, and from security to biomedicine. The present century, however, is also seeing an accelerating pace of innovation in glassy materials; as an example, glass-ceramics, which successfully combine the properties of an amorphous matrix with those of micro- or nano-crystals, offer a very high flexibility of design to chemists, physicists and engineers, who can conceive and implement advanced microdevices. In a very similar way, the synthesis of glassy polymers in a very wide range of chemical structures offers unprecedented potential of applications. The contemporary availability of microfabrication technologies, such as direct laser writing or 3D printing, which add to the most common processes (deposition, lithography and etching), facilitates the development of novel or advanced microdevices based on glassy materials. Biochemical and biomedical sensors, especially with the lab-on-a-chip target, are one of the most evident proofs of the success of this material platform. Other applications have also emerged in environment, food, and chemical industries. The present Special Issue of Micromachines aims at reviewing the current state-of-the-art and presenting perspectives of further development. Contributions related to the technologies, glassy materials, design and fabrication processes, characterization, and, eventually, applications are welcome