197 research outputs found
FPGA dynamic and partial reconfiguration : a survey of architectures, methods, and applications
Dynamic and partial reconfiguration are key differentiating capabilities of field programmable gate arrays (FPGAs). While they have been studied extensively in academic literature, they find limited use in deployed systems. We review FPGA reconfiguration, looking at architectures built for the purpose, and the properties of modern commercial architectures. We then investigate design flows, and identify the key challenges in making reconfigurable FPGA systems easier to design. Finally, we look at applications where reconfiguration has found use, as well as proposing new areas where this capability places FPGAs in a unique position for adoption
Smart technologies for effective reconfiguration: the FASTER approach
Current and future computing systems increasingly require that their functionality stays flexible after the system is operational, in order to cope with changing user requirements and improvements in system features, i.e. changing protocols and data-coding standards, evolving demands for support of different user applications, and newly emerging applications in communication, computing and consumer electronics. Therefore, extending the functionality and the lifetime of products requires the addition of new functionality to track and satisfy the customers needs and market and technology trends. Many contemporary products along with the software part incorporate hardware accelerators for reasons of performance and power efficiency. While adaptivity of software is straightforward, adaptation of the hardware to changing requirements constitutes a challenging problem requiring delicate solutions. The FASTER (Facilitating Analysis and Synthesis Technologies for Effective Reconfiguration) project aims at introducing a complete methodology to allow designers to easily implement a system specification on a platform which includes a general purpose processor combined with multiple accelerators running on an FPGA, taking as input a high-level description and fully exploiting, both at design time and at run time, the capabilities of partial dynamic reconfiguration. The goal is that for selected application domains, the FASTER toolchain will be able to reduce the design and verification time of complex reconfigurable systems providing additional novel verification features that are not available in existing tool flows
Task modules Partitioning, Scheduling and Floorplanning for Partially Dynamically Reconfigurable Systems Based on Modern Heterogeneous FPGAs
Modern field programmable gate array(FPGA) can be partially dynamically
reconfigurable with heterogeneous resources distributed on the chip. And
FPGA-based partially dynamically reconfigurable system(FPGA-PDRS) can be used
to accelerate computing and improve computing flexibility.
However, the traditional design of FPGA-PDRS is based on manual design.
Implementing the automation of FPGA-PDRS needs to solve the problems of task
modules partitioning, scheduling, and floorplanning on heterogeneous resources.
Existing works only partly solve problems for the automation process of
FPGA-PDRS or model homogeneous resource for FPGA-PDRS.
To better solve the problems in the automation process of FPGA-PDRS and
narrow the gap between algorithm and application, in this paper, we propose a
complete workflow including three parts, pre-processing to generate the list of
task modules candidate shapes according to the resources requirements,
exploration process to search the solution of task modules partitioning,
scheduling, and floorplanning, and post-optimization to improve the success
rate of floorplan.
Experimental results show that, compared with state-of-the-art work, the
proposed complete workflow can improve performance by 18.7\%, reduce
communication cost by 8.6\%, on average, with improving the resources reuse
rate of the heterogeneous resources on the chip. And based on the solution
generated by the exploration process, the post-optimization can improve the
success rate of the floorplan by 14\%
Timing verification of dynamically reconfigurable logic for Xilinx Virtex FPGA series
This paper reports on a method for extending existing VHDL design and verification software available for the Xilinx Virtex series of FPGAs. It allows the designer to apply standard hardware design and verification tools to the design of dynamically reconfigurable logic (DRL). The technique involves the conversion of a dynamic design into multiple static designs, suitable for input to standard synthesis and APR tools. For timing and functional verification after APR, the sections of the design can then be recombined into a single dynamic system. The technique has been automated by extending an existing DRL design tool named DCSTech, which is part of the Dynamic Circuit Switching (DCS) CAD framework. The principles behind the tools are generic and should be readily extensible to other architectures and CAD toolsets. Implementation of the dynamic system involves the production of partial configuration bitstreams to load sections of circuitry. The process of creating such bitstreams, the final stage of our design flow, is summarized
Optimizing Scrubbing by Netlist Analysis for FPGA Configuration Bit Classification and Floorplanning
Existing scrubbing techniques for SEU mitigation on FPGAs do not guarantee an
error-free operation after SEU recovering if the affected configuration bits do
belong to feedback loops of the implemented circuits. In this paper, we a)
provide a netlist-based circuit analysis technique to distinguish so-called
critical configuration bits from essential bits in order to identify
configuration bits which will need also state-restoring actions after a
recovered SEU and which not. Furthermore, b) an alternative classification
approach using fault injection is developed in order to compare both
classification techniques. Moreover, c) we will propose a floorplanning
approach for reducing the effective number of scrubbed frames and d),
experimental results will give evidence that our optimization methodology not
only allows to detect errors earlier but also to minimize the
Mean-Time-To-Repair (MTTR) of a circuit considerably. In particular, we show
that by using our approach, the MTTR for datapath-intensive circuits can be
reduced by up to 48.5% in comparison to standard approaches
Optimising and evaluating designs for reconfigurable hardware
Growing demand for computational performance, and the rising cost for chip design and
manufacturing make reconfigurable hardware increasingly attractive for digital system implementation.
Reconfigurable hardware, such as field-programmable gate arrays (FPGAs),
can deliver performance through parallelism while also providing flexibility to enable
application builders to reconfigure them. However, reconfigurable systems, particularly
those involving run-time reconfiguration, are often developed in an ad-hoc manner. Such
an approach usually results in low designer productivity and can lead to inefficient designs.
This thesis covers three main achievements that address this situation. The first
achievement is a model that captures design parameters of reconfigurable hardware and
performance parameters of a given application domain. This model supports optimisations
for several design metrics such as performance, area, and power consumption. The second
achievement is a technique that enhances the relocatability of bitstreams for reconfigurable
devices, taking into account heterogeneous resources. This method increases the flexibility
of modules represented by these bitstreams while reducing configuration storage size and
design compilation time. The third achievement is a technique to characterise the power
consumption of FPGAs in different activity modes. This technique includes the evaluation
of standby power and dedicated low-power modes, which are crucial in meeting the
requirements for battery-based mobile devices
A Modular Approach to Adaptive Reactive Streaming Systems
The latest generations of FPGA devices offer large resource counts that provide the headroom to implement large-scale and complex systems. However, there are increasing challenges for the designer, not just because of pure size and complexity, but also in harnessing effectively the flexibility and programmability of the FPGA. A central issue is the need to integrate modules from diverse sources to promote modular design and reuse. Further, the capability to perform dynamic partial reconfiguration (DPR) of FPGA devices means that implemented systems can be made reconfigurable, allowing components to be changed during operation. However, use of DPR typically requires low-level planning of the system implementation, adding to the design challenge. This dissertation presents ReShape: a high-level approach for designing systems by interconnecting modules, which gives a âplug and playâ look and feel to the designer, is supported by tools that carry out implementation and verification functions, and is carried through to support system reconfiguration during operation. The emphasis is on the inter-module connections and abstracting the communication patterns that are typical between modules â for example, the streaming of data that is common in many FPGA-based systems, or the reading and writing of data to and from memory modules. ShapeUp is also presented as the static precursor to ReShape. In both, the details of wiring and signaling are hidden from view, via metadata associated with individual modules. ReShape allows system reconfiguration at the module level, by supporting type checking of replacement modules and by managing the overall system implementation, via metadata associated with its FPGA floorplan. The methodology and tools have been implemented in a prototype for a broad domain-specific setting â networking systems â and have been validated on real telecommunications design projects
- âŠ