Chippe : a system for constraint driven behavioral synthesis

This report describes the Chippe system, gives some background previous work and describes several sample design runs of the system. Also presented are the sources of the design tradeoffs used by Chippe, and overview of the internal design model, and experiences using the system

Pipelining Of Double Precision Floating Point Division And Square Root Operations On Field-programmable Gate Arrays

Many space applications, such as vision-based systems, synthetic aperture radar, and radar altimetry rely increasingly on high data rate DSP algorithms. These algorithms use double precision floating point arithmetic operations. While most DSP applications can be executed on DSP processors, the DSP numerical requirements of these new space applications surpass by far the numerical capabilities of many current DSP processors. Since the tradition in DSP processing has been to use fixed point number representation, only recently have DSP processors begun to incorporate floating point arithmetic units, even though most of these units handle only single precision floating point addition/subtraction, multiplication, and occasionally division. While DSP processors are slowly evolving to meet the numerical requirements of newer space applications, FPGA densities have rapidly increased to parallel and surpass even the gate densities of many DSP processors and commodity CPUs. This makes them attractive platforms to implement compute-intensive DSP computations. Even in the presence of this clear advantage on the side of FPGAs, few attempts have been made to examine how wide precision floating point arithmetic, particularly division and square root operations, can perform on FPGAs to support these compute-intensive DSP applications. In this context, this thesis presents the sequential and pipelined designs of IEEE-754 compliant double floating point division and square root operations based on low radix digit recurrence algorithms. FPGA implementations of these algorithms have the advantage of being easily testable. In particular, the pipelined designs are synthesized based on careful partial and full unrolling of the iterations in the digit recurrence algorithms. In the overall, the implementations of the sequential and pipelined designs are common-denominator implementations which do not use any performance-enhancing embedded components such as multipliers and block memory. As these implementations exploit exclusively the fine-grain reconfigurable resources of Virtex FPGAs, they are easily portable to other FPGAs with similar reconfigurable fabrics without any major modifications. The pipelined designs of these two operations are evaluated in terms of area, throughput, and dynamic power consumption as a function of pipeline depth. Pipelining experiments reveal that the area overhead tends to remain constant regardless of the degree of pipelining to which the design is submitted, while the throughput increases with pipeline depth. In addition, these experiments reveal that pipelining reduces power considerably in shallow pipelines. Pipelining further these designs does not necessarily lead to significant power reduction. By partitioning these designs into deeper pipelines, these designs can reach throughputs close to the 100 MFLOPS mark by consuming a modest 1% to 8% of the reconfigurable fabric within a Virtex-II XC2VX000 (e.g., XC2V1000 or XC2V6000) FPGA

Versatile Montgomery Multiplier Architectures

Several algorithms for Public Key Cryptography (PKC), such as RSA, Diffie-Hellman, and Elliptic Curve Cryptography, require modular multiplication of very large operands (sizes from 160 to 4096 bits) as their core arithmetic operation. To perform this operation reasonably fast, general purpose processors are not always the best choice. This is why specialized hardware, in the form of cryptographic co-processors, become more attractive. Based upon the analysis of recent publications on hardware design for modular multiplication, this M.S. thesis presents a new architecture that is scalable with respect to word size and pipelining depth. To our knowledge, this is the first time a word based algorithm for Montgomery\u27s method is realized using high-radix bit-parallel multipliers working with two different types of finite fields (unified architecture for GF(p) and GF(2n)). Previous approaches have relied mostly on bit serial multiplication in combination with massive pipelining, or Radix-8 multiplication with the limitation to a single type of finite field. Our approach is centered around the notion that the optimal delay in bit-parallel multipliers grows with logarithmic complexity with respect to the operand size n, O(log3/2 n), while the delay of bit serial implementations grows with linear complexity O(n). Our design has been implemented in VHDL, simulated and synthesized in 0.5μ CMOS technology. The synthesized net list has been verified in back-annotated timing simulations and analyzed in terms of performance and area consumption

Power-Aware Design Methodologies for FPGA-Based Implementation of Video Processing Systems

The increasing capacity and capabilities of FPGA devices in recent years provide an attractive option for performance-hungry applications in the image and video processing domain. FPGA devices are often used as implementation platforms for image and video processing algorithms for real-time applications due to their programmable structure that can exploit inherent spatial and temporal parallelism. While performance and area remain as two main design criteria, power consumption has become an important design goal especially for mobile devices. Reduction in power consumption can be achieved by reducing the supply voltage, capacitances, clock frequency and switching activities in a circuit. Switching activities can be reduced by architectural optimization of the processing cores such as adders, multipliers, multiply and accumulators (MACS), etc. This dissertation research focuses on reducing the switching activities in digital circuits by considering data dependencies in bit level, word level and block level neighborhoods in a video frame. The bit level data neighborhood dependency consideration for power reduction is illustrated in the design of pipelined array, Booth and log-based multipliers. For an array multiplier, operands of the multipliers are partitioned into higher and lower parts so that the probability of the higher order parts being zero or one increases. The gating technique for the pipelined approach deactivates part(s) of the multiplier when the above special values are detected. For the Booth multiplier, the partitioning and gating technique is integrated into the Booth recoding scheme. In addition, a delay correction strategy is developed for the Booth multiplier to reduce the switching activities of the sign extension part in the partial products. A novel architecture design for the computation of log and inverse-log functions for the reduction of power consumption in arithmetic circuits is also presented. This also utilizes the proposed partitioning and gating technique for further dynamic power reduction by reducing the switching activities. The word level and block level data dependencies for reducing the dynamic power consumption are illustrated by presenting the design of a 2-D convolution architecture. Here the similarities of the neighboring pixels in window-based operations of image and video processing algorithms are considered for reduced switching activities. A partitioning and detection mechanism is developed to deactivate the parallel architecture for window-based operations if higher order parts of the pixel values are the same. A neighborhood dependent approach (NDA) is incorporated with different window buffering schemes. Consideration of the symmetry property in filter kernels is also applied with the NDA method for further reduction of switching activities. The proposed design methodologies are implemented and evaluated in a FPGA environment. It is observed that the dynamic power consumption in FPGA-based circuit implementations is significantly reduced in bit level, data level and block level architectures when compared to state-of-the-art design techniques. A specific application for the design of a real-time video processing system incorporating the proposed design methodologies for low power consumption is also presented. An image enhancement application is considered and the proposed partitioning and gating, and NDA methods are utilized in the design of the enhancement system. Experimental results show that the proposed multi-level power aware methodology achieves considerable power reduction. Research work is progressing In utilizing the data dependencies in subsequent frames in a video stream for the reduction of circuit switching activities and thereby the dynamic power consumption

Selective Vectorization for Short-Vector Instructions

Multimedia extensions are nearly ubiquitous in today's general-purpose processors. These extensions consist primarily of a set of short-vector instructions that apply the same opcode to a vector of operands. Vector instructions introduce a data-parallel component to processors that exploit instruction-level parallelism, and present an opportunity for increased performance. In fact, ignoring a processor's vector opcodes can leave a significant portion of the available resources unused. In order for software developers to find short-vector instructions generally useful, however, the compiler must target these extensions with complete transparency and consistent performance. This paper describes selective vectorization, a technique for balancing computation across a processor's scalar and vector units. Current approaches for targeting short-vector instructions directly adopt vectorizing technology first developed for supercomputers. Traditional vectorization, however, can lead to a performance degradation since it fails to account for a processor's scalar resources. We formulate selective vectorization in the context of software pipelining. Our approach creates software pipelines with shorter initiation intervals, and therefore, higher performance. A key aspect of selective vectorization is its ability to manage transfer of operands between vector and scalar instructions. Even when operand transfer is expensive, our technique is sufficiently sophisticated to achieve significant performance gains. We evaluate selective vectorization on a set of SPEC FP benchmarks. On a realistic VLIW processor model, the approach achieves whole-program speedups of up to 1.35x over existing approaches. For individual loops, it provides speedups of up to 1.75x

An on-line approach for evaluating trigonometric functions

This thesis investigates the evaluation of trigonometric functions based on an on-line arithmetic approach. On-line algorithms have been developed to evaluate the sine and cosine functions. Error analysis and heuristics are carried out to arrive at a minimal error algorithm based on the series expansion of the sine and cosine function. A logical design based on the algorithm is presented where the unit is designed as a set of basic modules. A detailed bit slice design of each module is also presented. A simulator was designed as an experimental tool for synthesis of the on-line algorithms, and a tool for performance evaluation

Baseband analog front-end and digital back-end for reconfigurable multi-standard terminals

Multimedia applications are driving wireless network operators to add high-speed data services such as Edge (E-GPRS), WCDMA (UMTS) and WLAN (IEEE 802.11a,b,g) to the existing GSM network. This creates the need for multi-mode cellular handsets that support a wide range of communication standards, each with a different RF frequency, signal bandwidth, modulation scheme etc. This in turn generates several design challenges for the analog and digital building blocks of the physical layer. In addition to the above-mentioned protocols, mobile devices often include Bluetooth, GPS, FM-radio and TV services that can work concurrently with data and voice communication. Multi-mode, multi-band, and multi-standard mobile terminals must satisfy all these different requirements. Sharing and/or switching transceiver building blocks in these handsets is mandatory in order to extend battery life and/or reduce cost. Only adaptive circuits that are able to reconfigure themselves within the handover time can meet the design requirements of a single receiver or transmitter covering all the different standards while ensuring seamless inter-interoperability. This paper presents analog and digital base-band circuits that are able to support GSM (with Edge), WCDMA (UMTS), WLAN and Bluetooth using reconfigurable building blocks. The blocks can trade off power consumption for performance on the fly, depending on the standard to be supported and the required QoS (Quality of Service) leve