Pipelined Two-Operand Modular Adders

Pipelined two-operand modular adder (TOMA) is one of basic components used in digital signal processing (DSP) systems that use the residue number system (RNS). Such modular adders are used in binary/residue and residue/binary converters, residue multipliers and scalers as well as within residue processing channels. The design of pipelined TOMAs is usually obtained by inserting an appriopriate number of latch layers inside a nonpipelined TOMA structure. Hence their area is also determined by the number of latches and the delay by the number of latch layers. In this paper we propose a new pipelined TOMA that is based on a new TOMA, that has the smaller area and smaller delay than other known structures. Comparisons are made using data from the very large scale of integration (VLSI) standard cell library

Loop pipelining with resource and timing constraints

Developing efficient programs for many of the current parallel computers is not easy due to the architectural complexity of those machines. The wide variety of machine organizations often makes it more difficult to port an existing program than to reprogram it completely. Therefore, powerful translators are necessary to generate effective code and free the programmer from concerns about the specific characteristics of the target machine. This work focuses on techniques to be used by an important class of translators, whose objective is to transform sequential programs into equivalent more parallel programs. The transformations are performed at instruction level in order to exploit low level parallelism and increase memory locality.Most of the current applications are programmed in languages which do not allow us to express parallelism between high-level sentences (as Pascal, C or Fortran). Furthermore, a lot of applications written ten or more years ago are still used today, and it is not feasible to rewrite such applications for many reasons (not only technical reasons, but also economic ones). Translators enable programmers to write the application in a familiar sequential programming language, without concerning their selves with the architecture of the target machine. Current compilers for parallel architectures not only translate a program written on a high-level language to the appropriate machine language, but also perform some transformations in the final code in order to execute the program in a more parallel way. The transformations improve the performance in the execution of the program by making use of the knowledge that the compiler has about the machine architecture. The semantics of the program remain intact after any transformation.Experiments show that limiting parallelization to basic blocks not included in loops limits maximum speedup. This is because loops often comprise a large portion of the parallelism available to be exploited in a program. For this reason, a lot of effort has been devoted in the recent years to parallelize loop execution. Several parallel computer architectures and compilation techniques have been proposed to exploit such a parallelism at different granularities. Multiprocessors exploit coarse grained parallelism by distributing entire loop iterations to different processors. Systems oriented to the high-level synthesis (HLS) of VLSI circuits, superscalar processors and very long instruction word (VLIW) processors exploit fine-grained parallelism at instruction level. This work addresses fine-grained parallelization of loops addressed to the HLS of VLSI circuits. Two algorithms are proposed for resource constraints and for timing constraints. An algorithm to reduce the number of registers required to execute a loop in a given architecture is also proposed.Postprint (published version

Bit-level pipelined digit-serial array processors

A new architecture for high performance digit-serial vector inner product (VIP) which can be pipelined to the bit-level is introduced. The design of the digit-serial vector inner product is based on a new systematic design methodology using radix-2n arithmetic. The proposed architecture allows a high level of bit-level pipelining to increase the throughput rate with minimum initial delay and minimum area. This will give designers greater flexibility in finding the best tradeoff between hardware cost and throughput rate. It is shown that sub-digit pipelined digit-serial structure can achieve a higher throughput rate with much less area consumption than an equivalent bit-parallel structure. A twin-pipe architecture to double the throughput rate of digit-serial multipliers and consequently that of the digit-serial vector inner product is also presented. The effect of the number of pipelining levels and the twin-pipe architecture on the throughput rate and hardware cost are discussed. A two's complement digit-serial architecture which can operate on both negative and positive numbers is also presented

Pipeline-Based Power Reduction in FPGA Applications

This paper shows how temporal parallelism has an important role in the power dissipation reduction in the FPGA field. Glitches propagation is blocked by the flip-flops or registers in the pipeline. Several multiplication structures are implemented over modern FPGAs, StratixII and Virtex4, comparing their results with and without pipeline and hardware duplication

A 16-bit CORDIC rotator for high-performance wireless LAN

In this paper we propose a novel 16-bit low power CORDIC rotator that is used for high-speed wireless LAN. The algorithm converges to the final target angle by adaptively selecting appropriate iteration steps while keeping the scale factor virtually constant. The VLSI architecture of the proposed design eliminates the entire arithmetic hardware in the angle approximation datapath and reduces the number of iterations by 50% on an average. The cell area of the processor is 0.7 mm2 and it dissipates 7 mW power at 20 MHz frequency

Streaming Reduction Circuit

Reduction circuits are used to reduce rows of floating point values to single values. Binary floating point operators often have deep pipelines, which may cause hazards when many consecutive rows have to be reduced. We present an algorithm by which any number of consecutive rows of arbitrary lengths can be reduced by a pipelined commutative and associative binary operator in an efficient manner. The algorithm is simple to implement, has a low latency, produces results in-order, and requires only small buffers. Besides, it uses only a single pipeline for the involved operation. The complexity of the algorithm depends on the depth of the pipeline, not on the length of the input rows. In this paper we discuss an implementation of this algorithm and we prove its correctness

Efficiency analysis methodology of FPGAs based on lost frequencies, area and cycles

We propose a methodology to study and to quantify efficiency and the impact of overheads on runtime performance. Most work on High-Performance Computing (HPC) for FPGAs only studies runtime performance or cost, while we are interested in how far we are from peak performance and, more importantly, why. The efficiency of runtime performance is defined with respect to the ideal computational runtime in absence of inefficiencies. The analysis of the difference between actual and ideal runtime reveals the overheads and bottlenecks. A formal approach is proposed to decompose the efficiency into three components: frequency, area and cycles. After quantification of the efficiencies, a detailed analysis has to reveal the reasons for the lost frequencies, lost area and lost cycles. We propose a taxonomy of possible causes and practical methods to identify and quantify the overheads. The proposed methodology is applied on a number of use cases to illustrate the methodology. We show the interaction between the three components of efficiency and show how bottlenecks are revealed

Two-phase RTD-CMOS pipelined circuits

MOnostable-BIstable Logic Element (MOBILE) networks can be operated in a gate-level pipelined fashion (nanopipeline) allowing high through output. Resonant tunneling diode (RTD)-based MOBILE nanopipelined circuits have been reported using different clock schemes including a four-phase strategy and a single-phase clock scheme. In particular, significant power advantages of single-phase RTD-CMOS MOBILE circuits over pure CMOS have been shown. This letter compares the RTD-CMOS realizations using a single clock and a novel two-phase clock solution. Significant superior robustness and performance in terms of power and area are obtained for the two-phase implementations

Two-dimensional DCT/IDCT architecture

A fully parallel architecture for the computation of a two-dimensional (2-D) discrete cosine transform (DCT), based on row-column decomposition is presented. It uses the same one dimensional (1-D) DCT unit for the row and column computations and (N2+N) registers to perform the transposition. It possesses features of regularity and modularity, and is thus well suited for VLSI implementation. It can be used for the computation of either the forward or the inverse 2-D DCT. Each 1-D DCT unit uses N fully parallel vector inner product (VIP) units. The design of the VIP units is based on a systematic design methodology using radix-2” arithmetic, which allows partitioning of the elements of each vector into small groups. Array multipliers without the final adder are used to produce the different partial product terms. This allows a more efficient use of 4:2 compressors for the accumulation of the products in the intermediate stages and reduces the number of accumulators from N to one. Using this procedure, the 2-D DCT architecture requires less than N2 multipliers (in terms of area occupied) and only 2N adders. It can compute a N x N-point DCT at a rate of one complete transform per N cycles after an appropriate initial delay