3,095 research outputs found
Plasma Processes for Renewable Energy Technologies
The use of renewable energy is an effective solution for the prevention of global warming. On the other hand, environmental plasmas are one of powerful means to solve global environmental problems on nitrogen oxides, (NOx), sulfur oxides (SOx), particulate matter (PM), volatile organic compounds (VOC), and carbon dioxides (CO2) in the atmosphere. By combining both technologies, we can develop an extremely effective environmental improvement technology. Based on this background, a Special Issue of the journal Energies on plasma processes for renewable energy technologies is planned. On the issue, we focus on environment plasma technologies that can effectively utilize renewable electric energy sources, such as photovoltaic power generation, biofuel power generation, wind turbine power generation, etc. However, any latest research results on plasma environmental improvement processes are welcome for submission. We are looking, among others, for papers on the following technical subjects in which either plasma can use renewable energy sources or can be used for renewable energy technologies: Plasma decomposition technology of harmful gases, such as the plasma denitrification method; Plasma removal technology of harmful particles, such as electrostatic precipitation; Plasma decomposition technology of harmful substances in liquid, such as gas–liquid interfacial plasma; Plasma-enhanced flow induction and heat transfer enhancement technologies, such as ionic wind device and plasma actuator; Plasma-enhanced combustion and fuel reforming; Other environment plasma technologies
Coal desulfurization by low temperature chlorinolysis, phase 2
An engineering scale reactor system was constructed and operated for the evaluation of five high sulfur bituminous coals obtained from Kentucky, Ohio, and Illinois. Forty-four test runs were conducted under conditions of 100 by 200 mesh coal,solvents - methlychloroform and water, 60 to 130 C, 0 to 60 psig, 45 to 90 minutes, and gaseous chlorine flow rate of up to 24 SCFH. Sulfur removals demonstrated for the five coals were: maximum total sulfur removal of 46 to 89% (4 of 5 coals with methylchloroform) and 0 to 24% with water. In addition, an integrated continuous flow mini-pilot plant was designed and constructed for a nominal coal rate of 2 kilograms/hour which will be operated as part of the follow-on program. Equipment flow sheets and design drawings are included for both the batch and continuous flow mini-pilot plants
Best Available Techniques (BAT) Reference Document for the Food, Drink and Milk Industries. Industrial Emissions Directive 2010/75/EU (Integrated Pollution Prevention and Control)
The Best Available Techniques (BAT) Reference Document (BREF) for the Food, Drink and Milk Industries is part of a series of documents presenting the results of an exchange of information between EU Member States, the industries concerned, non-governmental organisations promoting environmental protection, and the Commission, to draw up, review and – where necessary – update BAT reference documents as required by Article 13(1) of Directive 2010/78/EU on Industrial Emissions (the Directive). This document is published by the European Commission pursuant to Article 13(6) of the Directive.
The BREF for the Food, Drink and Milk Industries covers the treatment and processing, other than exclusively packaging, of the animal and/or vegetable raw materials, whether previously processed or unprocessed, intended for the production of food or feed, as specified in Section 6.4 (b) of Annex I to Directive 2010/75/EU.
Important issues for the implementation of Directive 2010/75/EU in the food, drink and milk (FDM) sector are emissions to water, energy and water consumption. Chapter 1 provides general information on the FDM sector and on the industrial processes and techniques used within this sector. Chapter 2 provides information on the common industrial processes, abatement systems and general techniques that are used across the FDM sector. General techniques to consider in the determination of BAT (i.e. those techniques to consider that are widely applied in the FDM sector) are reported in Chapter 2. Chapters 3 to 15 give the applied processes, current emission and consumption levels, techniques to consider in the determination of BAT and emerging techniques for the FDM sectors that are covered by these chapters. Chapter 16 provides thumbnail descriptions of additional FDM sectors, for which a data collection via questionnaires has not been carried out. Chapter 17 presents the BAT conclusions as defined in Article 3(12) of the Directive, both general and sector-specific. Concluding remarks and recommendations for future work are presented in Chapter 18.JRC.B.5-Circular Economy and Industrial Leadershi
Recommended from our members
Emerging Energy-efficiency and CO{sub 2} Emission-reduction Technologies for Cement and Concrete Production
Globally, the cement industry accounts for approximately 5 percent of current anthropogenic carbon dioxide (CO{sub 2}) emissions. World cement demand and production are increasing significantly, leading to an increase in this industry's absolute energy use and CO{sub 2} emissions. Development of new energy-efficiency and CO{sub 2} emission-reduction technologies and their deployment in the market will be key for the cement industry's mid- and long-term climate change mitigation strategies. This report is an initial effort to compile available information on process description, energy savings, environmental and other benefits, costs, commercialization status, and references for emerging technologies to reduce the cement industry's energy use and CO{sub 2} emissions. Although studies from around the world identify a variety of sector-specific and cross-cutting energy-efficiency technologies for the cement industry that have already been commercialized, information is scarce and/or scattered regarding emerging or advanced energy-efficiency and low-carbon technologies that are not yet commercialized. This report consolidates available information on nineteen emerging technologies for the cement industry, with the goal of providing engineers, researchers, investors, cement companies, policy makers, and other interested parties with easy access to a well-structured database of information on these technologies
Book of abstracts of the 15th International Symposium of Croatian Metallurgical Society - SHMD \u272022, Materials and metallurgy
Book of abstracts of the 15th International Symposium of Croatian Metallurgical Society - SHMD \u272022, Materials and metallurgy, Zagreb, Croatia, March 22-23, 2022. Abstracts are organized in four sections: Materials - section A; Process metallurgy - Section B; Plastic processing - Section C and Metallurgy and related topics - Section D
Second Aerospace Environmental Technology Conference
The mandated elimination of CFC'S, Halons, TCA, and other ozone depleting chemicals and specific hazardous materials has required changes and new developments in aerospace materials and processes. The aerospace industry has been involved for several years in providing product substitutions, redesigning entire production processes, and developing new materials that minimize or eliminate damage to the environment. These activities emphasize replacement cleaning solvents and their application, verification, compliant coatings including corrosion protection system and removal techniques, chemical propulsion effects on the environment, and the initiation of modifications to relevant processing and manufacturing specifications and standards
Book of abstracts of the 15th International Symposium of Croatian Metallurgical Society - SHMD \u272022, Materials and metallurgy
Book of abstracts of the 15th International Symposium of Croatian Metallurgical Society - SHMD \u272022, Materials and metallurgy, Zagreb, Croatia, March 22-23, 2022. Abstracts are organized in four sections: Materials - section A; Process metallurgy - Section B; Plastic processing - Section C and Metallurgy and related topics - Section D
Industrialization of Hot Wire Chemical Vapor Deposition for thin film applications
AbstractThe consequences of implementing a Hot Wire Chemical Vapor Deposition (HWCVD) chamber into an existing in-line or roll-to-roll reactor are described. The hardware and operation of the HWCVD production reactor is compared to that of existing roll-to-roll reactors based on Plasma Enhanced Chemical Vapor Deposition. The most important consequences are the technical consequences and the economic consequences, which are both discussed. The technical consequences are adaptations needed to the hardware and to the processing sequences due to the different interaction of the HWCVD process with the substrate and already deposited layers. The economic consequences are the reduced investments in radio frequency (RF) supplies and RF components. This is partially offset by investments that have to be made in higher capacity pumping systems. The most mature applications of HWCVD are moisture barrier coatings for thin film flexible devices such as Organic Light Emitting Diodes and Organic Photovoltaics, and passivation layers for multicrystalline Si solar cells, high mobility field effect transistors, and silicon heterojunction cells (also known as heterojunction cells with intrinsic thin film layers). Another example is the use of Si in thin film photovoltaics. The cost perspective per unit of thin film photovoltaic product using HWCVD is estimated at 0.07€/Wp for the Si thin film component
- …