Compute-and-Forward Relay Networks with Asynchronous, Mobile, and Delay-Sensitive Users

We consider a wireless network consisting of multiple source nodes, a set of relays and a destination node. Suppose the sources transmit their messages simultaneously to the relays and the destination aims to decode all the messages. At the physical layer, a conventional approach would be for the relay to decode the individual message one at a time while treating rest of the messages as interference. Compute-and-forward is a novel strategy which attempts to turn the situation around by treating the interference as a constructive phenomenon. In compute-and-forward, each relay attempts to directly compute a combination of the transmitted messages and then forwards it to the destination. Upon receiving the combinations of messages from the relays, the destination can recover all the messages by solving the received equations. When identical lattice codes are employed at the sources, error correction to integer combination of messages is a viable option by exploiting the algebraic structure of lattice codes. Therefore, compute-and-forward with lattice codes enables the relay to manage interference and perform error correction concurrently. It is shown that compute-and-forward exhibits substantial improvement in the achievable rate compared with other state-of-the-art schemes for medium to high signal-to-noise ratio regime. Despite several results that show the excellent performance of compute-and-forward, there are still important challenges to overcome before we can utilize compute-and- forward in practice. Some important challenges include the assumptions of \perfect timing synchronization "and \quasi-static fading", since these assumptions rarely hold in realistic wireless channels. So far, there are no conclusive answers to whether compute-and-forward can still provide substantial gains even when these assumptions are removed. When lattice codewords are misaligned and mixed up, decoding integer combination of messages is not straightforward since the linearity of lattice codes is generally not invariant to time shift. When channel exhibits time selectivity, it brings challenges to compute-and-forward since the linearity of lattice codes does not suit the time varying nature of the channel. Another challenge comes from the emerging technologies for future 5G communication, e.g., autonomous driving and virtual reality, where low-latency communication with high reliability is necessary. In this regard, powerful short channel codes with reasonable encoding/decoding complexity are indispensable. Although there are fruitful results on designing short channel codes for point-to-point communication, studies on short code design specifically for compute-and-forward are rarely found. The objective of this dissertation is threefold. First, we study compute-and-forward with timing-asynchronous users. Second, we consider the problem of compute-and- forward over block-fading channels. Finally, the problem of compute-and-forward for low-latency communication is studied. Throughout the dissertation, the research methods and proposed remedies will center around the design of lattice codes in order to facilitate the use of compute-and-forward in the presence of these challenges

Construction of lattices for communications and security

In this thesis, we propose a new class of lattices based on polar codes, namely polar lattices. Polar lattices enjoy explicit construction and provable goodness for the additive white Gaussian noise (AWGN) channel, \textit{i.e.}, they are \emph{AWGN-good} lattices, in the sense that the error probability (for infinite lattice coding) vanishes for any fixed volume-to-noise ratio (VNR) greater than $2\pi e$. Our construction is based on the multilevel approach of Forney \textit{et al.}, where on each level we construct a capacity-achieving polar code. We show the component polar codes are naturally nested, thereby fulfilling the requirement of the multilevel lattice construction. We present a more precise analysis of the VNR of the resultant lattice, which is upper-bounded in terms of the flatness factor and the capacity losses of the component codes. The proposed polar lattices are efficiently decodable by using multi-stage decoding. Design examples are presented to demonstrate the superior performance of polar lattices. However, there is no infinite lattice coding in the practical applications. We need to apply the power constraint on the polar lattices which generates the polar lattice codes. We prove polar lattice codes can achieve the capacity \frac{1}{2}\log(1+\SNR) of the power-constrained AWGN channel with a novel shaping scheme. The main idea is that by implementing the lattice Gaussian distribution over the AWGN-good polar lattices, the maximum error-free transmission rate of the resultant coding scheme can be arbitrarily close to the capacity \frac{1}{2}\log(1+\SNR). The shaping technique is based on discrete lattice Gaussian distribution, which leads to a binary asymmetric channel at each level for the multilevel lattice codes. Then it is straightforward to employ multilevel asymmetric polar codes which is a combination of polar lossless source coding and polar channel coding. The construction of polar codes for an asymmetric channel can be converted to that for a related symmetric channel, and it turns out that this symmetric channel is equivalent to an minimum mean-square error (MMSE) scaled $\Lambda/\Lambda'$ channel in lattice coding in terms of polarization, which eventually simplifies our coding design. Finally, we investigate the application of polar lattices in physical layer security. Polar lattice codes are proved to be able to achieve the strong secrecy capacity of the Mod-$\Lambda$ AWGN wiretap channel. The Mod-$\Lambda$ assumption was due to the fact that a practical shaping scheme aiming to achieve the optimum shaping gain was missing. In this thesis, we use our shaping scheme and extend polar lattice coding to the Gaussian wiretap channel. By employing the polar coding technique for asymmetric channels, we manage to construct an AWGN-good lattice and a secrecy-good lattice with optimal shaping simultaneously. Then we prove the resultant wiretap coding scheme can achieve the strong secrecy capacity for the Gaussian wiretap channel.Open Acces

Proceedings of the 35th WIC Symposium on Information Theory in the Benelux and the 4th joint WIC/IEEE Symposium on Information Theory and Signal Processing in the Benelux, Eindhoven, the Netherlands May 12-13, 2014

Compressive sensing (CS) as an approach for data acquisition has recently received much attention. In CS, the signal recovery problem from the observed data requires the solution of a sparse vector from an underdetermined system of equations. The underlying sparse signal recovery problem is quite general with many applications and is the focus of this talk. The main emphasis will be on Bayesian approaches for sparse signal recovery. We will examine sparse priors such as the super-Gaussian and student-t priors and appropriate MAP estimation methods. In particular, re-weighted l2 and re-weighted l1 methods developed to solve the optimization problem will be discussed. The talk will also examine a hierarchical Bayesian framework and then study in detail an empirical Bayesian method, the Sparse Bayesian Learning (SBL) method. If time permits, we will also discuss Bayesian methods for sparse recovery problems with structure; Intra-vector correlation in the context of the block sparse model and inter-vector correlation in the context of the multiple measurement vector problem

Multimedia

The nowadays ubiquitous and effortless digital data capture and processing capabilities offered by the majority of devices, lead to an unprecedented penetration of multimedia content in our everyday life. To make the most of this phenomenon, the rapidly increasing volume and usage of digitised content requires constant re-evaluation and adaptation of multimedia methodologies, in order to meet the relentless change of requirements from both the user and system perspectives. Advances in Multimedia provides readers with an overview of the ever-growing field of multimedia by bringing together various research studies and surveys from different subfields that point out such important aspects. Some of the main topics that this book deals with include: multimedia management in peer-to-peer structures & wireless networks, security characteristics in multimedia, semantic gap bridging for multimedia content and novel multimedia applications

Performance Analysis of Physical Layer Network Coding in Massive MIMO Systems with M-QAM Modulations

In this paper, we develop a practical approach for deploying Physical Layer Network Coding (PNC) in multi-user M-Ary Quadrature Amplitude Modulation (M-QAM) Massive Multiple-Input Multiple-Output (MIMO) systems. We formulate a PNC mapping scheme as a function of clusters of estimated summation and difference (SD) of the transmitted symbols from user pairs. Utilizing existing linear detection schemes, such as Zero Forcing (ZF) and Minimum Mean Square Error (MMSE), a cluster of SD symbols are detected using an SD linearly transformed channel matrix. Furthermore, utilizing Maximum a Posteriori (MAP) soft decoding, the SD symbols are mapped to the PNC symbols, leveraging on the PNC symbol that maximizes the likelihood function. For each variant of M-QAM, we derive and simplify a specialization of the generalized PNC mapping function. The error performance results, through simulation, reveal that the proposed PNC scheme achieves twice the spectral efficiency in Massive MIMO, without changing the latter's underlying framework and without any degradation in the bit-error-rate (BER). In fact, our investigation has proved that the BER of the proposed Massive MIMO and PNC is slightly better than that of the conventional Massive MIMO. The feasibility of deploying our proposed PNC scheme in Massive MIMO systems paves way for NC applications to be realized in cellular systems

Intelligent Circuits and Systems

ICICS-2020 is the third conference initiated by the School of Electronics and Electrical Engineering at Lovely Professional University that explored recent innovations of researchers working for the development of smart and green technologies in the fields of Energy, Electronics, Communications, Computers, and Control. ICICS provides innovators to identify new opportunities for the social and economic benefits of society.　 This conference bridges the gap between academics and R&D institutions, social visionaries, and experts from all strata of society to present their ongoing research activities and foster research relations between them. It provides opportunities for the exchange of new ideas, applications, and experiences in the field of smart technologies and finding global partners for future collaboration. The ICICS-2020 was conducted in two broad categories, Intelligent Circuits & Intelligent Systems and Emerging Technologies in Electrical Engineering