3,637 research outputs found
Phase noise and sub-carrier spacing effects on the performance of an OFDM communication system
This letter analyzes the phase noise effects on an
orthogonal frequency division multiplexing (OFDM) signal and
its dependence with the sub-carrier spacing. Pilot-based channel
estimation, which has been suggested as a means of combating
the channel effects, can also correct the phase noise effects under
some circumstances, which are investigatedPublicad
Maximizing the Bandwidth Efficiency of the CMS Tracker Analog Optical Links
The feasibility of achieving faster data transmission using advanced digital
modulation techniques over the current CMS Tracker analog optical link is
explored. The spectral efficiency of Quadrature Amplitude Modulation
-Orthogonal Frequency Division Multiplexing (QAM-OFDM) makes it an attractive
option for a future implementation of the readout link. An analytical method
for estimating the data-rate that can be achieved using OFDM over the current
optical links is described and the first theoretical results are presented
Improving the chromatic dispersion tolerance in long-haul fibre links using the coherent optical orthogonal frequency division multiplexing
Numerical simulations of the coherent optical orthogonal frequency division multiplexing modems are undertaken to investigate the effect of the adaptive modulation, the number of sub-carriers, the cyclic prefix (CP) length, the clipping ratio, quantisation bit resolution and the sampling speed of analogue-to-digital converters (ADCs) on the chromatic dispersion (CD) of a single mode fibre (SMF) at data rates up to 80 Gbps. The use of a large number of sub-carriers is more effective in combating fibre dispersion than employing a long CP; moreover, the optimum number of sub-carriers in the presence of both SMF non-linearities and CD has been identified. The authors show that using a high bit resolution ADC with a high clipping ratio, the transmission distance can be increased at specific data rates. Furthermore, it is shown that ADCs with a low sampling speed also improve the system tolerance to the fibre CD. In addition, simulation results show that the use of adaptive modulation schemes improves spectrum usage efficiency, thus resulting in higher tolerance to the CD when compared with the case in which identical modulation formats are adopted across all sub-carriers
A survey on fiber nonlinearity compensation for 400 Gbps and beyond optical communication systems
Optical communication systems represent the backbone of modern communication
networks. Since their deployment, different fiber technologies have been used
to deal with optical fiber impairments such as dispersion-shifted fibers and
dispersion-compensation fibers. In recent years, thanks to the introduction of
coherent detection based systems, fiber impairments can be mitigated using
digital signal processing (DSP) algorithms. Coherent systems are used in the
current 100 Gbps wavelength-division multiplexing (WDM) standard technology.
They allow the increase of spectral efficiency by using multi-level modulation
formats, and are combined with DSP techniques to combat the linear fiber
distortions. In addition to linear impairments, the next generation 400 Gbps/1
Tbps WDM systems are also more affected by the fiber nonlinearity due to the
Kerr effect. At high input power, the fiber nonlinear effects become more
important and their compensation is required to improve the transmission
performance. Several approaches have been proposed to deal with the fiber
nonlinearity. In this paper, after a brief description of the Kerr-induced
nonlinear effects, a survey on the fiber nonlinearity compensation (NLC)
techniques is provided. We focus on the well-known NLC techniques and discuss
their performance, as well as their implementation and complexity. An extension
of the inter-subcarrier nonlinear interference canceler approach is also
proposed. A performance evaluation of the well-known NLC techniques and the
proposed approach is provided in the context of Nyquist and super-Nyquist
superchannel systems.Comment: Accepted in the IEEE Communications Surveys and Tutorial
Modeling of Orthogonal Frequency Division Multiplexing (OFDM) for Transmission in Broadband Wireless Communications
Orthogonal Frequency Division Multiplexing (OFDM) is a multi carrier modulation technique that provides high bandwidth efficiency because the carriers are orthogonal to each other and multiple carriers share the data among themselves. The main advantage of this transmission technique is its robustness to channel fading in wireless communication environment. This paper investigates the effectiveness of OFDM and assesses its suitability as a modulation technique in wireless communications. Several of the main factors affecting the performance of a typical OFDM system are considered and they include multipath delay spread, channel noise, distortion (clipping), and timing requirements. The core processing block and performance analysis of the system is modeled usingMatlab
Multipath Multiplexing for Capacity Enhancement in SIMO Wireless Systems
This paper proposes a novel and simple orthogonal faster than Nyquist (OFTN)
data transmission and detection approach for a single input multiple output
(SIMO) system. It is assumed that the signal having a bandwidth is
transmitted through a wireless channel with multipath components. Under
this assumption, the current paper provides a novel and simple OFTN
transmission and symbol-by-symbol detection approach that exploits the
multiplexing gain obtained by the multipath characteristic of wideband wireless
channels. It is shown that the proposed design can achieve a higher
transmission rate than the existing one (i.e., orthogonal frequency division
multiplexing (OFDM)). Furthermore, the achievable rate gap between the proposed
approach and that of the OFDM increases as the number of receiver antennas
increases for a fixed value of . This implies that the performance gain of
the proposed approach can be very significant for a large-scale multi-antenna
wireless system. The superiority of the proposed approach is shown
theoretically and confirmed via numerical simulations. {Specifically, we have
found {upper-bound average} rates of 15 bps/Hz and 28 bps/Hz with the OFDM and
proposed approaches, respectively, in a Rayleigh fading channel with 32 receive
antennas and signal to noise ratio (SNR) of 15.3 dB. The extension of the
proposed approach for different system setups and associated research problems
is also discussed.Comment: IEEE Transactions on Wireless Communication
Development of a dc-ac power conditioner for wind generator by using neural network
This project present of development single phase DC-AC converter for wind
generator application. The mathematical model of the wind generator and Artificial
Neural Network control for DC-AC converter is derived. The controller is designed to
stabilize the output voltage of DC-AC converter. To verify the effectiveness of the
proposal controller, both simulation and experimental are developed. The simulation and
experimental result show that the amplitude of output voltage of the DC-AC converter
can be controlled
- âŠ